-----BEGIN PGP SIGNATURE-----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=k5mW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zhKv
-----END PGP SIGNATURE-----
Merge 3.10.105 into android-msm-bullhead-3.10-oreo-m5
Changes in 3.10.105: (315 commits)
sched/core: Fix a race between try_to_wake_up() and a woken up task
sched/core: Fix an SMP ordering race in try_to_wake_up() vs. schedule()
crypto: algif_skcipher - Require setkey before accept(2)
crypto: af_alg - Disallow bind/setkey/... after accept(2)
crypto: af_alg - Add nokey compatibility path
crypto: algif_skcipher - Add nokey compatibility path
crypto: hash - Add crypto_ahash_has_setkey
crypto: shash - Fix has_key setting
crypto: algif_hash - Require setkey before accept(2)
crypto: skcipher - Add crypto_skcipher_has_setkey
crypto: algif_skcipher - Add key check exception for cipher_null
crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path
crypto: algif_hash - Remove custom release parent function
crypto: algif_skcipher - Remove custom release parent function
crypto: af_alg - Forbid bind(2) when nokey child sockets are present
crypto: algif_hash - Fix race condition in hash_check_key
crypto: algif_skcipher - Fix race condition in skcipher_check_key
crypto: algif_skcipher - Load TX SG list after waiting
crypto: cryptd - initialize child shash_desc on import
crypto: skcipher - Fix blkcipher walk OOM crash
crypto: gcm - Fix IV buffer size in crypto_gcm_setkey
MIPS: KVM: Fix unused variable build warning
KVM: MIPS: Precalculate MMIO load resume PC
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write
KVM: MIPS: Make ERET handle ERL before EXL
KVM: x86: fix wbinvd_dirty_mask use-after-free
KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
KVM: Disable irq while unregistering user notifier
PM / devfreq: Fix incorrect type issue.
ppp: defer netns reference release for ppp channel
x86/mm/xen: Suppress hugetlbfs in PV guests
xen: Add RING_COPY_REQUEST()
xen-netback: don't use last request to determine minimum Tx credit
xen-netback: use RING_COPY_REQUEST() throughout
xen-blkback: only read request operation from shared ring once
xen/pciback: Save xen_pci_op commands before processing it
xen/pciback: Save the number of MSI-X entries to be copied later.
xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled
xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled
xen/pciback: Do not install an IRQ handler for MSI interrupts.
xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.
xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
xen-pciback: Add name prefix to global 'permissive' variable
x86/xen: fix upper bound of pmd loop in xen_cleanhighmap()
x86/traps: Ignore high word of regs->cs in early_idt_handler_common
x86/mm: Disable preemption during CR3 read+write
x86/apic: Do not init irq remapping if ioapic is disabled
x86/mm/pat, /dev/mem: Remove superfluous error message
x86/paravirt: Do not trace _paravirt_ident_*() functions
x86/build: Build compressed x86 kernels as PIE
x86/um: reuse asm-generic/barrier.h
iommu/amd: Update Alias-DTE in update_device_table()
iommu/amd: Free domain id when free a domain of struct dma_ops_domain
ARM: 8616/1: dt: Respect property size when parsing CPUs
ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
ARM: sa1100: clear reset status prior to reboot
ARM: sa1111: fix pcmcia suspend/resume
arm64: avoid returning from bad_mode
arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
arm64: spinlocks: implement smp_mb__before_spinlock() as smp_mb()
arm64: debug: avoid resetting stepping state machine when TIF_SINGLESTEP
MIPS: Malta: Fix IOCU disable switch read for MIPS64
MIPS: ptrace: Fix regs_return_value for kernel context
powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET
powerpc/vdso64: Use double word compare on pointers
powerpc/powernv: Use CPU-endian PEST in pnv_pci_dump_p7ioc_diag_data()
powerpc/64: Fix incorrect return value from __copy_tofrom_user
powerpc/nvram: Fix an incorrect partition merge
avr32: fix copy_from_user()
avr32: fix 'undefined reference to `___copy_from_user'
avr32: off by one in at32_init_pio()
s390/dasd: fix hanging device after clear subchannel
parisc: Ensure consistent state when switching to kernel stack at syscall entry
microblaze: fix __get_user()
microblaze: fix copy_from_user()
mn10300: failing __get_user() and get_user() should zero
m32r: fix __get_user()
sh64: failing __get_user() should zero
score: fix __get_user/get_user
s390: get_user() should zero on failure
ARC: uaccess: get_user to zero out dest in cause of fault
asm-generic: make get_user() clear the destination on errors
frv: fix clear_user()
cris: buggered copy_from_user/copy_to_user/clear_user
blackfin: fix copy_from_user()
score: fix copy_from_user() and friends
sh: fix copy_from_user()
hexagon: fix strncpy_from_user() error return
mips: copy_from_user() must zero the destination on access_ok() failure
asm-generic: make copy_from_user() zero the destination properly
alpha: fix copy_from_user()
metag: copy_from_user() should zero the destination on access_ok() failure
parisc: fix copy_from_user()
openrisc: fix copy_from_user()
openrisc: fix the fix of copy_from_user()
mn10300: copy_from_user() should zero on access_ok() failure...
sparc32: fix copy_from_user()
ppc32: fix copy_from_user()
ia64: copy_from_user() should zero the destination on access_ok() failure
fix fault_in_multipages_...() on architectures with no-op access_ok()
fix memory leaks in tracing_buffers_splice_read()
arc: don't leak bits of kernel stack into coredump
Fix potential infoleak in older kernels
swapfile: fix memory corruption via malformed swapfile
coredump: fix unfreezable coredumping task
usb: dwc3: gadget: increment request->actual once
USB: validate wMaxPacketValue entries in endpoint descriptors
USB: fix typo in wMaxPacketSize validation
usb: xhci: Fix panic if disconnect
USB: serial: fix memleak in driver-registration error path
USB: kobil_sct: fix non-atomic allocation in write path
USB: serial: mos7720: fix non-atomic allocation in write path
USB: serial: mos7840: fix non-atomic allocation in write path
usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition
USB: change bInterval default to 10 ms
usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()
USB: serial: cp210x: fix hardware flow-control disable
usb: misc: legousbtower: Fix NULL pointer deference
usb: gadget: function: u_ether: don't starve tx request queue
USB: serial: cp210x: fix tiocmget error handling
usb: gadget: u_ether: remove interrupt throttling
usb: chipidea: move the lock initialization to core file
Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
ALSA: rawmidi: Fix possible deadlock with virmidi registration
ALSA: timer: fix NULL pointer dereference in read()/ioctl() race
ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE
ALSA: timer: fix NULL pointer dereference on memory allocation failure
ALSA: ali5451: Fix out-of-bound position reporting
ALSA: pcm : Call kill_fasync() in stream lock
zfcp: fix fc_host port_type with NPIV
zfcp: fix ELS/GS request&response length for hardware data router
zfcp: close window with unblocked rport during rport gone
zfcp: retain trace level for SCSI and HBA FSF response records
zfcp: restore: Dont use 0 to indicate invalid LUN in rec trace
zfcp: trace on request for open and close of WKA port
zfcp: restore tracing of handle for port and LUN with HBA records
zfcp: fix D_ID field with actual value on tracing SAN responses
zfcp: fix payload trace length for SAN request&response
zfcp: trace full payload of all SAN records (req,resp,iels)
scsi: zfcp: spin_lock_irqsave() is not nestable
scsi: mpt3sas: Fix secure erase premature termination
scsi: mpt3sas: Unblock device after controller reset
scsi: mpt3sas: fix hang on ata passthrough commands
mpt2sas: Fix secure erase premature termination
scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
scsi: ibmvfc: Fix I/O hang when port is not mapped
scsi: Fix use-after-free
scsi: arcmsr: Buffer overflow in arcmsr_iop_message_xfer()
scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded
scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware
ext4: validate that metadata blocks do not overlap superblock
ext4: avoid modifying checksum fields directly during checksum verification
ext4: use __GFP_NOFAIL in ext4_free_blocks()
ext4: reinforce check of i_dtime when clearing high fields of uid and gid
ext4: allow DAX writeback for hole punch
ext4: sanity check the block and cluster size at mount time
reiserfs: fix "new_insert_key may be used uninitialized ..."
reiserfs: Unlock superblock before calling reiserfs_quota_on_mount()
xfs: fix superblock inprogress check
libxfs: clean up _calc_dquots_per_chunk
btrfs: ensure that file descriptor used with subvol ioctls is a dir
ocfs2/dlm: fix race between convert and migration
ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
ubifs: Fix assertion in layout_in_gaps()
ubifs: Fix xattr_names length in exit paths
UBIFS: Fix possible memory leak in ubifs_readdir()
ubifs: Abort readdir upon error
ubifs: Fix regression in ubifs_readdir()
UBI: fastmap: scrub PEB when bitflips are detected in a free PEB EC header
NFSv4.x: Fix a refcount leak in nfs_callback_up_net
NFSD: Using free_conn free connection
NFS: Don't drop CB requests with invalid principals
NFSv4: Open state recovery must account for file permission changes
fs/seq_file: fix out-of-bounds read
fs/super.c: fix race between freeze_super() and thaw_super()
isofs: Do not return EACCES for unknown filesystems
hostfs: Freeing an ERR_PTR in hostfs_fill_sb_common()
driver core: Delete an unnecessary check before the function call "put_device"
driver core: fix race between creating/querying glue dir and its cleanup
drm/radeon: fix radeon_move_blit on 32bit systems
drm: Reject page_flip for !DRIVER_MODESET
drm/radeon: Ensure vblank interrupt is enabled on DPMS transition to on
qxl: check for kmap failures
Input: i8042 - break load dependency between atkbd/psmouse and i8042
Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
Input: ili210x - fix permissions on "calibrate" attribute
hwrng: exynos - Disable runtime PM on probe failure
hwrng: omap - Fix assumption that runtime_get_sync will always succeed
hwrng: omap - Only fail if pm_runtime_get_sync returns < 0
i2c-eg20t: fix race between i2c init and interrupt enable
em28xx-i2c: rt_mutex_trylock() returns zero on failure
i2c: core: fix NULL pointer dereference under race condition
i2c: at91: fix write transfers by clearing pending interrupt first
iio: accel: kxsd9: Fix raw read return
iio: accel: kxsd9: Fix scaling bug
thermal: hwmon: Properly report critical temperature in sysfs
cdc-acm: fix wrong pipe type on rx interrupt xfers
timers: Use proper base migration in add_timer_on()
EDAC: Increment correct counter in edac_inc_ue_error()
IB/ipoib: Fix memory corruption in ipoib cm mode connect flow
IB/core: Fix use after free in send_leave function
IB/ipoib: Don't allow MC joins during light MC flush
IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV
IB/mlx4: Fix create CQ error flow
IB/uverbs: Fix leak of XRC target QPs
IB/cm: Mark stale CM id's whenever the mad agent was unregistered
mtd: blkdevs: fix potential deadlock + lockdep warnings
mtd: pmcmsp-flash: Allocating too much in init_msp_flash()
mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl
perf symbols: Fixup symbol sizes before picking best ones
perf: Tighten (and fix) the grouping condition
tty: Prevent ldisc drivers from re-using stale tty fields
tty: limit terminal size to 4M chars
tty: vt, fix bogus division in csi_J
vt: clear selection before resizing
drivers/vfio: Rework offsetofend()
include/stddef.h: Move offsetofend() from vfio.h to a generic kernel header
stddef.h: move offsetofend inside #ifndef/#endif guard, neaten
ipv6: don't call fib6_run_gc() until routing is ready
ipv6: split duplicate address detection and router solicitation timer
ipv6: move DAD and addrconf_verify processing to workqueue
ipv6: addrconf: fix dev refcont leak when DAD failed
ipv6: fix rtnl locking in setsockopt for anycast and multicast
ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()
ipv6: correctly add local routes when lo goes up
ipv6: dccp: fix out of bound access in dccp_v6_err()
ipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped
ip6_tunnel: Clear IP6CB in ip6tunnel_xmit()
ip6_tunnel: disable caching when the traffic class is inherited
net/irda: handle iriap_register_lsap() allocation failure
tcp: fix use after free in tcp_xmit_retransmit_queue()
tcp: properly scale window in tcp_v[46]_reqsk_send_ack()
tcp: fix overflow in __tcp_retransmit_skb()
tcp: fix wrong checksum calculation on MTU probing
tcp: take care of truncations done by sk_filter()
bonding: Fix bonding crash
net: ratelimit warnings about dst entry refcount underflow or overflow
mISDN: Support DR6 indication in mISDNipac driver
mISDN: Fixing missing validation in base_sock_bind()
net: disable fragment reassembly if high_thresh is set to zero
ipvs: count pre-established TCP states as active
iwlwifi: pcie: fix access to scratch buffer
svc: Avoid garbage replies when pc_func() returns rpc_drop_reply
brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfill
brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()
brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap()
pstore: Fix buffer overflow while write offset equal to buffer size
net/mlx4_core: Allow resetting VF admin mac to zero
firewire: net: guard against rx buffer overflows
firewire: net: fix fragmented datagram_size off-by-one
netfilter: fix namespace handling in nf_log_proc_dostring
can: bcm: fix warning in bcm_connect/proc_register
net: fix sk_mem_reclaim_partial()
net: avoid sk_forward_alloc overflows
ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route
packet: call fanout_release, while UNREGISTERING a netdev
net: sctp, forbid negative length
sctp: validate chunk len before actually using it
net: clear sk_err_soft in sk_clone_lock()
net: mangle zero checksum in skb_checksum_help()
dccp: do not send reset to already closed sockets
dccp: fix out of bound access in dccp_v4_err()
sctp: assign assoc_id earlier in __sctp_connect
neigh: check error pointer instead of NULL for ipv4_neigh_lookup()
ipv4: use new_gw for redirect neigh lookup
mac80211: fix purging multicast PS buffer queue
mac80211: discard multicast and 4-addr A-MSDUs
cfg80211: limit scan results cache size
mwifiex: printk() overflow with 32-byte SSIDs
ipv4: Set skb->protocol properly for local output
net: sky2: Fix shutdown crash
kaweth: fix firmware download
tracing: Move mutex to protect against resetting of seq data
kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd
Revert "ipc/sem.c: optimize sem_lock()"
cfq: fix starvation of asynchronous writes
drbd: Fix kernel_sendmsg() usage - potential NULL deref
lib/genalloc.c: start search from start of chunk
tools/vm/slabinfo: fix an unintentional printf
rcu: Fix soft lockup for rcu_nocb_kthread
ratelimit: fix bug in time interval by resetting right begin time
mfd: core: Fix device reference leak in mfd_clone_cell
PM / sleep: fix device reference leak in test_suspend
mmc: mxs: Initialize the spinlock prior to using it
mmc: block: don't use CMD23 with very old MMC cards
pstore/core: drop cmpxchg based updates
pstore/ram: Use memcpy_toio instead of memcpy
pstore/ram: Use memcpy_fromio() to save old buffer
mb86a20s: fix the locking logic
mb86a20s: fix demod settings
cx231xx: don't return error on success
cx231xx: fix GPIOs for Pixelview SBTVD hybrid
gpio: mpc8xxx: Correct irq handler function
uio: fix dmem_region_start computation
KEYS: Fix short sprintf buffer in /proc/keys show function
hv: do not lose pending heartbeat vmbus packets
staging: iio: ad5933: avoid uninitialized variable in error case
mei: bus: fix received data size check in NFC fixup
ACPI / APEI: Fix incorrect return value of ghes_proc()
PCI: Handle read-only BARs on AMD CS553x devices
tile: avoid using clocksource_cyc2ns with absolute cycle count
dm flakey: fix reads to be issued if drop_writes configured
mm,ksm: fix endless looping in allocating memory when ksm enable
can: dev: fix deadlock reported after bus-off
hwmon: (adt7411) set bit 3 in CFG1 register
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
mfd: 88pm80x: Double shifting bug in suspend/resume
ASoC: omap-mcpdm: Fix irq resource handling
regulator: tps65910: Work around silicon erratum SWCZ010
dm: mark request_queue dead before destroying the DM device
fbdev/efifb: Fix 16 color palette entry calculation
metag: Only define atomic_dec_if_positive conditionally
Linux 3.10.105
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Conflicts:
arch/arm/mach-sa1100/generic.c
arch/arm64/kernel/traps.c
crypto/blkcipher.c
drivers/devfreq/devfreq.c
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/u_ether.c
fs/ubifs/dir.c
include/net/if_inet6.h
lib/genalloc.c
net/ipv6/addrconf.c
net/ipv6/tcp_ipv6.c
net/wireless/scan.c
sound/core/timer.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=LW9r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fJ2P
-----END PGP SIGNATURE-----
Merge 3.10.98 into android-msm-bullhead-3.10-oreo-m5
Changes in 3.10.98: (55 commits)
ALSA: seq: Fix double port list deletion
wan/x25: Fix use-after-free in x25_asy_open_tty()
staging/speakup: Use tty_ldisc_ref() for paste kworker
pty: fix possible use after free of tty->driver_data
pty: make sure super_block is still valid in final /dev/tty close
AIO: properly check iovec sizes
ext4: fix potential integer overflow
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
perf: Fix inherited events vs. tracepoint filters
ptrace: use fsuid, fsgid, effective creds for fs access checks
tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines
tracing: Fix freak link error caused by branch tracer
klist: fix starting point removed bug in klist iterators
scsi: restart list search after unlock in scsi_remove_target
scsi_sysfs: Fix queue_ramp_up_period return code
iscsi-target: Fix rx_login_comp hang after login failure
Fix a memory leak in scsi_host_dev_release()
SCSI: Fix NULL pointer dereference in runtime PM
iscsi-target: Fix potential dead-lock during node acl delete
SCSI: fix crashes in sd and sr runtime PM
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
scsi_dh_rdac: always retry MODE SELECT on command lock violation
scsi: fix soft lockup in scsi_remove_target() on module removal
iio:ad7793: Fix ad7785 product ID
iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
iio: adis_buffer: Fix out-of-bounds memory access
iio: dac: mcp4725: set iio name property in sysfs
cifs: fix erroneous return value
nfs: Fix race in __update_open_stateid()
udf: limit the maximum number of indirect extents in a row
udf: Prevent buffer overrun with multi-byte characters
udf: Check output buffer length when converting name to CS0
ARM: 8519/1: ICST: try other dividends than 1
ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
fuse: break infinite loop in fuse_fill_write_pages()
mm: soft-offline: check return value in second __get_any_page() call
Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled
Input: elantech - mark protocols v2 and v3 as semi-mt
Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG
mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone()
xhci: Fix list corruption in urb dequeue at host removal
m32r: fix m32104ut_defconfig build fail
dma-debug: switch check from _text to _stext
scripts/bloat-o-meter: fix python3 syntax error
memcg: only free spare array when readers are done
radix-tree: fix race in gang lookup
radix-tree: fix oops after radix_tree_iter_retry
intel_scu_ipcutil: underflow in scu_reg_access()
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
futex: Drop refcount if requeue_pi() acquired the rtmutex
ip6mr: call del_timer_sync() in ip6mr_free_table()
module: wrapper for symbol name.
Linux 3.10.98
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
commit 06dfe5cc0cc684e735cb0232fdb756d30780b05d upstream.
SA1111 PCMCIA was broken when PCMCIA switched to using dev_pm_ops for
the PCMCIA socket class. PCMCIA used to handle suspend/resume via the
socket hosting device, which happened at normal device suspend/resume
time.
However, the referenced commit changed this: much of the resume now
happens much earlier, in the noirq resume handler of dev_pm_ops.
However, on SA1111, the PCMCIA device is not accessible as the SA1111
has not been resumed at _noirq time. It's slightly worse than that,
because the SA1111 has already been put to sleep at _noirq time, so
suspend doesn't work properly.
Fix this by converting the core SA1111 code to use dev_pm_ops as well,
and performing its own suspend/resume at noirq time.
This fixes these errors in the kernel log:
pcmcia_socket pcmcia_socket0: time out after reset
pcmcia_socket pcmcia_socket1: time out after reset
and the resulting lack of PCMCIA cards after a S2RAM cycle.
Fixes: d7646f7632 ("pcmcia: use dev_pm_ops for class pcmcia_socket_class")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 5070fb14a0154f075c8b418e5bc58a620ae85a45 upstream.
When trying to set the ICST 307 clock to 25174000 Hz I ran into
this arithmetic error: the icst_hz_to_vco() correctly figure out
DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of
25174000 Hz out of the VCO. (I replicated the icst_hz() function
in a spreadsheet to verify this.)
However, when I called icst_hz() on these VCO settings it would
instead return 4122709 Hz. This causes an error in the common
clock driver for ICST as the common clock framework will call
.round_rate() on the clock which will utilize icst_hz_to_vco()
followed by icst_hz() suggesting the erroneous frequency, and
then the clock gets set to this.
The error did not manifest in the old clock framework since
this high frequency was only used by the CLCD, which calls
clk_set_rate() without first calling clk_round_rate() and since
the old clock framework would not call clk_round_rate() before
setting the frequency, the correct values propagated into
the VCO.
After some experimenting I figured out that it was due to a simple
arithmetic overflow: the divisor for 24Mhz reference frequency
as reference becomes 24000000*2*(99+8)=0x132212400 and the "1"
in bit 32 overflows and is lost.
But introducing an explicit 64-by-32 bit do_div() and casting
the divisor into (u64) we get the right frequency back, and the
right frequency gets set.
Tested on the ARM Versatile.
Cc: linux-clk@vger.kernel.org
Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e972c37459c813190461dabfeaac228e00aae259 upstream.
Since the dawn of time the ICST code has only supported divide
by one or hang in an eternal loop. Luckily we were always dividing
by one because the reference frequency for the systems using
the ICSTs is 24MHz and the [min,max] values for the PLL input
if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop
will always terminate immediately without assigning any divisor
for the reference frequency.
But for the code to make sense, let's insert the missing i++
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move fiq_debugger into drivers/staging/android/fiq_debugger/ to
allow for sharing between ARM and ARM64.
Change-Id: I6ca5e8b7e3d000f57da3234260261c5592cef2a8
Signed-off-by: Colin Cross <ccross@android.com>
Git-commit: 5bcc457a96f078cfe0dcd42a7f7143338c23f45b
Git-repo: https://android.googlesource.com/kernel/common.git
Signed-off-by: Ian Maund <imaund@codeaurora.org>
cpaccess is the only client of set_get_l2_indirect_reg(), a special-
purpose API for writing an indirect Krait CP15 register and reading
back the new value. For simplicity, this API is being removed and
replaced with bacl-to-back calls to set_l2_indirect_reg() and
get_l2_indirect_reg(), which should perform comparably.
Change-Id: I868ae115265c59e58ffd37dc405a91c6962e0c3d
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
Nothing about the sched_clock implementation in the ARM port is
specific to the architecture. Generalize the code so that other
architectures can use it by selecting GENERIC_SCHED_CLOCK.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[jstultz: Merge minor collisions with other patches in my tree]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Git-commit: 38ff87f77af0b5a93fc8581cff1d6e5692ab8970
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[imaund@codeaurora.org: resolve merge conflicts]
Signed-off-by: Ian Maund <imaund@codeaurora.org>
* qandroid-3.10: (636 commits)
netfilter: xt_qtaguid: Protect iface list access with necessary lock
HID: magicmouse: Fix build warning
USB: gadget: mtp: Fix OUT endpoint request length usage in read
USB: gadget: f_mtp: Fix using tx buffer pointer
msm: Fix race condition in domain lookup
msm: Add null-pointer checks for domains
base: sync: increase size of sync_timeline name
USB: gadget: mtp: Add module parameters for Tx transfer length
msm: iommu: Lock the genpool allocation
gpu: ion: fix page offset in dma_buf_kmap()
gpu: ion: Fix bug in ion_system_heap map_user
gpu: ion: Only map as much of the vma as the user requested
gpu: ion: use vmalloc to allocate page array to map kernel
gpu: ion: Remove dead comments
gpu: ion: Minimize allocation fallback delay
mmc: sd: Set the card removed if card detect fails
gpu: ion: don't fault in individual pages for the CP heap
gpu: ion: do not ask for compound pages in system heap
gpu: ion: Modify the system heap to try to allocate large/huge pages
gpu: ion: Set the dma_address of the sg list at alloc time
...
Conflicts:
arch/arm/Kconfig
arch/arm/include/asm/hardware/cache-l2x0.h
arch/arm/mm/cache-l2x0.c
drivers/mmc/card/block.c
drivers/usb/gadget/udc-core.c
cpaccess has self-modifying code. This does not work when
CONFIG_DEBUG_SET_MODULE_RONX is set and cpaccess is built
as a module, because the text section is marked not writeable.
Call mm function to make the modified instruction writeable.
Change-Id: I317ab55cd6bdceae429ad89629818ab5f7f99599
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
cpaccess uses sysdev which is being deprecated.
Move the cpaccess node out of the /sys/devices/system
directory to /sys/devices. Temporarily leave the original
sysdev node for migration purposes, until userspace
applications can be moved to the new node.
Change-Id: Iacc776968f892fc6c6463764e576d987e4371716
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
The write_val argument was not specified as an input
on the asm instruction. The compiler thought it wasn't used,
even though the asm instruction does use r0, which
is how write_val is passed into the function. The compiler
would optimise out the argument being passed into
the function.
Add write_val as an input operand to prevent it being
optimised out.
Change-Id: I71f35e1b2e3c655f4020163d089d9c71bbd6614b
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
Use a label instead of using function start address. It's not
guaranteed that the compiler will make the mrc instruction
the first instruction in the function.
Self-modifying code replaces the dummy instruction with a new
instruction during runtime according to user inputs.
Change-Id: I8c37f4e414ce5983f0317a51a3cf790b45763bfc
Acked-by: Suren Eda Naarayana Kulothungan <sedanaar@qualcomm.com>
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
Use smp_call_function_single only for SMP systems. For
single cores, call the function directly. Use CONFIG_SMP
to determine if its a SMP system.
Change-Id: I310d8e449ba1fd00318cb4454b3bc840f67230aa
Signed-off-by: Suren Eda Naarayana Kulothungan <sedanaar@codeaurora.org>
(cherry picked from commit 2c9001b514daecea0433ed0e23fc60b1513ac379)
Declare function as noinline so that function which changes
during run time does not get inlined and instead gets called.
Without this, the function contents get inlined while
optimization is turned on.
Change-Id: I8533b0c5a83ed48346a2846e7cd531b8907f82d8
Signed-off-by: Suren Eda Naarayana Kulothungan <sedanaar@codeaurora.org>
(cherry picked from commit 42b0f68886094aa319aa9ca8da72c5ac394dd1e9)
Calls the mmu function to ensure that kernel space is
write-enabled before writing the updated CP15
instruction. Removes the unnecessary write of the
constant bx lr instruction.
Change-Id: Idfe44bb89e793b009b17565e7486f3a6e8cdf582
Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
(cherry picked from commit 7673a8753ade677b02fbc013f95958d2ee815ba0)
Added indirect L2 rw support to cpaccess kernel module. Input format
change to include a parameter to specify register access type. Validation
if register type is one of supported types.
Change-Id: I5bd52c89d87a4fb4da4248526e56079bb604f910
Signed-off-by: Suren Eda Naarayana Kulothungan <sedanaar@codeaurora.org>
(cherry picked from commit 4c317fbf87a93d8e34e33063b6164e5d5c32cdd0)
The tool can be used to read/write to CP registers by
passing the CP parameters through /sys interface. SMP
support added.
Change-Id: I01d3621f2b6f17d959a237d207b817992404ef88
Signed-off-by: Suren Eda Naarayana Kulothungan <sedanaar@codeaurora.org>
(cherry picked from commit c399b9755096e95036362f00f819c28650eb1a10)
Conflicts:
arch/arm/Kconfig
arch/arm/common/Makefile
debug_console_write calls debug_uart_flush, which will usually wait
until the serial port fifo empties. If another thread is continuously
calling fiq_tty_write, the fifo will constantly be refilled and
debug_uart_flush might never return.
Add a spinlock that is locked in debug_console_write and fiq_tty_write
to ensure they can't run at the same time. This has an extra advantage
of preventing lines from the console and tty from being mixed together.
Also reduce the size returned by fiq_tty_write_room to keep the time
spent with the spinlock held to a reasonable value.
In addition, make sure fiq context can't loop forever by never calling
debug_uart_flush when the console is enabled.
Change-Id: I5712b01f740ca0c84f680d2032c9fa16b7656939
Signed-off-by: Colin Cross <ccross@android.com>
kernel_restart cannot be called from interrupt context. Add support for
commands called from a work function, and implement the "reboot" command
there. Also rename the existing irq-mode command to "reset" and change
it to use machine_restart instead of kernel_restart.
Change-Id: I3c423147c01db03d89e95a5b99096ca89462079f
Signed-off-by: Colin Cross <ccross@android.com>
Fix setting up consoles on multiple fiq debugger devices by
splitting the tty driver init into the initcall, and initializing
the single tty device during probe. Has the side effect of moving
the tty device node to /dev/ttyFIQx, where x is the platform device
id, which should normally match the serial port.
To avoid having to pass a different console=/dev/ttyFIQx for every
device, make the fiq debugger a preferred console that will be used
by default if no console was passed on the command line.
Change-Id: I6cc2670628a41e84615859bc96adba189966d647
Signed-off-by: Colin Cross <ccross@android.com>
Adds polling tty ops to the fiq debugger console tty, which allows
kgdb to run against an fiq debugger console.
Add a check in do_sysrq to prevent enabling kgdb from the fiq
debugger unless a flag (writable only by root) has been set. This
should make it safe to enable KGDB on a production device.
Also add a shortcut to enable the console and kgdb together, to
allow kgdb to be enabled when the shell on the console is not
responding.
Change-Id: Ifc65239ca96c9887431a6a36b9b44a539002f544
Signed-off-by: Colin Cross <ccross@android.com>
Convert all the calls to state->pdata->uart_putc to a debug_putc
helper.
Change-Id: Idc007bd170ff1b51d0325e238105ae0c86d23777
Signed-off-by: Colin Cross <ccross@android.com>
Pass the rest of the reboot command to kernel_restart to allow
reboot bootloader to work from FIQ debugger.
Change-Id: I4e7b366a69268dda17ffcf4c84f2373d15cb1271
Signed-off-by: Colin Cross <ccross@android.com>
Call kernel_restart instead of arch_reset, the ARM reset handling
has changed.
Remove localtimer irq printing, they now show up in the regular
irq stats.
Change-Id: I523da343b292c5711f3e1cbfd766d32eea2da84e
Signed-off-by: Colin Cross <ccross@android.com>
Pull ARM fixes from Russell King:
"A small number of fixes for stuff from the last merge window, and in
one case (IRQ time accounting) the previous merge window."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value
ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge
ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked
ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile
ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
ARM: finally enable IRQ time accounting config
Since commit c0114709ed ("irqchip: gic: Perform the gic_secondary_init()
call via CPU notifier") it is no longer required nor possible to call
gic_secondary_init() from platform code.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
These are cleanups and smaller changes that either depend on earlier
feature branches or came in late during the development cycle.
We normally try to get all cleanups early, so these are the exceptions:
- A follow-up on the clocksource reworks, hopefully the last time
we need to merge clocksource subsystem changes through arm-soc.
A first set of patches was part of the original 3.10 arm-soc cleanup
series because of interdependencies with timer drivers now moved out
of arch/arm.
- Migrating the SPEAr13xx platform away from using auxdata for DMA
channel descriptions towards using information in device tree,
based on the earlier SPEAr multiplatform series
- A few follow-ups on the Atmel SAMA5 support and other changes
for Atmel at91 based on the larger at91 reworks.
- Moving the armada irqchip implementation to drivers/irqchip
- Several OMAP cleanups following up on the larger series already
merged in 3.10.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=HWfp
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late cleanups from Arnd Bergmann:
"These are cleanups and smaller changes that either depend on earlier
feature branches or came in late during the development cycle. We
normally try to get all cleanups early, so these are the exceptions:
- A follow-up on the clocksource reworks, hopefully the last time we
need to merge clocksource subsystem changes through arm-soc.
A first set of patches was part of the original 3.10 arm-soc
cleanup series because of interdependencies with timer drivers now
moved out of arch/arm.
- Migrating the SPEAr13xx platform away from using auxdata for DMA
channel descriptions towards using information in device tree,
based on the earlier SPEAr multiplatform series
- A few follow-ups on the Atmel SAMA5 support and other changes for
Atmel at91 based on the larger at91 reworks.
- Moving the armada irqchip implementation to drivers/irqchip
- Several OMAP cleanups following up on the larger series already
merged in 3.10."
* tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
ARM: OMAP4: change the device names in usb_bind_phy
ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a
ARM: SPEAr: conditionalize SMP code
ARM: arch_timer: Silence debug preempt warnings
ARM: OMAP: remove unused variable
serial: amba-pl011: fix !CONFIG_DMA_ENGINE case
ata: arasan: remove the need for platform_data
ARM: at91/sama5d34ek.dts: remove not needed compatibility string
ARM: at91: dts: add MCI DMA support
ARM: at91: dts: add i2c dma support
ARM: at91: dts: set #dma-cells to the correct value
ARM: at91: suspend both memory controllers on at91sam9263
irqchip: armada-370-xp: slightly cleanup irq controller driver
irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
irqchip: move IRQ driver for Armada 370/XP
ARM: mvebu: move L2 cache initialization in init_early()
devtree: add binding documentation for sp804
ARM: integrator-cp: convert use CLKSRC_OF for timer init
ARM: versatile: use OF init for sp804 timer
ARM: versatile: add versatile dtbs to dtbs target
...
Two platforms, bcm and exynos have their own firmware interfaces using
the "secure monitor call", this adds support for those.
We had originally planned to have a third set of patches in here, which
would extend support for the existing generic "psci" call that is used
on multiple platforms as well as Xen and KVM guests, but that ended up
getting dropped because the patches were not ready in time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=68m5
-----END PGP SIGNATURE-----
Merge tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM platform specific firmware interfaces from Olof Johansson:
"Two platforms, bcm and exynos have their own firmware interfaces using
the "secure monitor call", this adds support for those.
We had originally planned to have a third set of patches in here,
which would extend support for the existing generic "psci" call that
is used on multiple platforms as well as Xen and KVM guests, but that
ended up getting dropped because the patches were not ready in time."
* tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: bcm: mark bcm_kona_smc_init as __init
ARM: bcm281xx: Add DT support for SMC handler
ARM: bcm281xx: Add L2 cache enable code
ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
ARM: EXYNOS: Add support for Exynos secure firmware
ARM: EXYNOS: Add support for secure monitor calls
ARM: Add interface for registering and calling firmware-specific operations
The full mcpm layer is not likely to be relevant to v6 based
platforms, so a multiplatform kernel won't use that code if booted
on v6 hardware.
This patch modifies the AFLAGS for affected mcpm .S files to
specify armv7-a explicitly for that code.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Now that the cluster power API is in place, we can use it for SMP secondary
bringup and CPU hotplug in a generic fashion.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Instead of requiring the first man to be elected in advance (which
can be suboptimal in some situations), this patch uses a per-
cluster mutex to co-ordinate selection of the first man.
This should also make it more feasible to reuse this code path for
asynchronous cluster resume (as in CPUidle scenarios).
We must ensure that the vlock data doesn't share a cacheline with
anything else, or dirty cache eviction could corrupt it.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
This patch adds a simple low-level voting mutex implementation
to be used to arbitrate during first man selection when no load/store
exclusive instructions are usable.
For want of a better name, these are called "vlocks". (I was
tempted to call them ballot locks, but "block" is way too confusing
an abbreviation...)
There is no function to wait for the lock to be released, and no
vlock_lock() function since we don't need these at the moment.
These could straightforwardly be added if vlocks get used for other
purposes.
For architectural correctness even Strongly-Ordered memory accesses
require barriers in order to guarantee that multiple CPUs have a
coherent view of the ordering of memory accesses. Whether or not
this matters depends on hardware implementation details of the
memory system. Since the purpose of this code is to provide a clean,
generic locking mechanism with no platform-specific dependencies the
barriers should be present to avoid unpleasant surprises on future
platforms.
Note:
* When taking the lock, we don't care about implicit background
memory operations and other signalling which may be pending,
because those are not part of the critical section anyway.
A DMB is sufficient to ensure correctly observed ordering if
the explicit memory accesses in vlock_trylock.
* No barrier is required after checking the election result,
because the result is determined by the store to
VLOCK_OWNER_OFFSET and is already globally observed due to the
barriers in voting_end. This means that global agreement on
the winner is guaranteed, even before the winner is known
locally.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
This provides helper methods to coordinate between CPUs coming down
and CPUs going up, as well as documentation on the used algorithms,
so that cluster teardown and setup
operations are not done for a cluster simultaneously.
For use in the power_down() implementation:
* __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu)
* __mcpm_outbound_enter_critical(unsigned int cluster)
* __mcpm_outbound_leave_critical(unsigned int cluster)
* __mcpm_cpu_down(unsigned int cluster, unsigned int cpu)
The power_up_setup() helper should do platform-specific setup in
preparation for turning the CPU on, such as invalidating local caches
or entering coherency. It must be assembler for now, since it must
run before the MMU can be switched on. It is passed the affinity level
for which initialization should be performed.
Because the mcpm_sync_struct content is looked-up and modified
with the cache enabled or disabled depending on the code path, it is
crucial to always ensure proper cache maintenance to update main memory
right away. The sync_cache_*() helpers are used to that end.
Also, in order to prevent a cached writer from interfering with an
adjacent non-cached writer, we ensure each state variable is located to
a separate cache line.
Thanks to Nicolas Pitre and Achin Gupta for the help with this
patch.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
This is the basic API used to handle the powering up/down of individual
CPUs in a (multi-)cluster system. The platform specific backend
implementation has the responsibility to also handle the cluster level
power as well when the first/last CPU in a cluster is brought up/down.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
CPUs in cluster based systems, such as big.LITTLE, have special needs
when entering the kernel due to a hotplug event, or when resuming from
a deep sleep mode.
This is vectorized so multiple CPUs can enter the kernel in parallel
without serialization.
The mcpm prefix stands for "multi cluster power management", however
this is usable on single cluster systems as well. Only the basic
structure is introduced here. This will be extended with later patches.
In order not to complexify things more than they currently have to,
the planned work to make runtime adjusted MPIDR based indexing and
dynamic memory allocation for cluster states is postponed to a later
cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions
should be sufficient for those systems expected to be available in the
near future.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Move the integrator-cp timer init to timer-sp.c and use CLKSRC_OF. There is
no reason to use the aliases, so drop them from the init code.
The integrator-cp timers are mistakenly called sp804 timers in the dts, but
in fact they are not sp804 dual timers, but single timers with the same
programming model. Fix the dts to reflect this.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
This adds CLKSRC_OF based init for sp804 timer. The clock initialization is
refactored to support retrieving the clock(s) from the DT.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Some boards are running with secure firmware running in TrustZone secure
world, which changes the way some things have to be initialized.
This patch adds an interface for platforms to specify available firmware
operations and call them.
A wrapper macro, call_firmware_op(), checks if the operation is provided
and calls it if so, otherwise returns -ENOSYS to allow fallback to
legacy operation..
By default no operations are provided.
Example of use:
In code using firmware ops:
__raw_writel(virt_to_phys(exynos4_secondary_startup),
CPU1_BOOT_REG);
/* Call Exynos specific smc call */
if (call_firmware_op(cpu_boot, cpu) == -ENOSYS)
cpu_boot_legacy(...); /* Try legacy way */
gic_raise_softirq(cpumask_of(cpu), 1);
In board-/platform-specific code:
static int platformX_do_idle(void)
{
/* tell platformX firmware to enter idle */
return 0;
}
static int platformX_cpu_boot(int i)
{
/* tell platformX firmware to boot CPU i */
return 0;
}
static const struct firmware_ops platformX_firmware_ops = {
.do_idle = exynos_do_idle,
.cpu_boot = exynos_cpu_boot,
/* other operations not available on platformX */
};
static void __init board_init_early(void)
{
register_firmware_ops(&platformX_firmware_ops);
}
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Now that we have drivers/irqchip, move VIC irqchip to drivers/irqchip.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Now that the VIC initialization sets up the handle_arch_irq pointer, we
can remove it for all machines and make it static. Move vic_handle_irq
to avoid a forward declaration.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Cc: Alessandro Rubini <rubini@unipv.it>
Cc: STEricsson <STEricsson_nomadik_linux@list.st.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Nathan Chancellor