This is a regulator driver for display DSV.
Change-Id: I8c08d44efaccad7151457b1030ba3f3f7091e1db
Signed-off-by: soyoung.min <soyoung.min@lge.com>
Signed-off-by: choongryeol.lee <choongryeol.lee@lge.com>
LAB/IBB regulator can provide power supply for other consumers. Also, they
can work together to provide power supply for LCD or AMOLED panel.
Change-Id: If3eaa9b0fa14a62b2131d5d0853d061c45d846b3
Signed-off-by: Ke Liu <keliu@codeaurora.org>
TPS65132 is a dual output regulator chip. It is usually used for
providing positive and negative supply voltages for LCD panel source
driver ICs.
The chip has a positive supply rail and a negative supply rail. Both
rails support 4V~6V output voltage range and each rail can be
controlled separately.
Change-Id: I6012bc8dd0f19a8cd6a94fe00457fc65b8408346
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
The memory accelerator (MEM ACC) controls the delays applied during
memory access. These delays vary based on the power-mode (corner)
on which the memory is connected. This driver adds a regulator
interface to configure the power-mode of the memory accelerator
based on the APC (application processor) corner.
Change-Id: I830ff000f8a16c4d3de5bdebf48d424354ddb086
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Move the cpr-regulator driver from the arch/arm/mach-msm
directory into the drivers/regulator directory. Moving this
driver out of the arch/arm/mach-msm directory allows it to be
shared with architectures other than 'arm'. In particular,
moving it allows it to be used by arm64.
Change-Id: I0b487c7fae42c260e06f5b70d1716bfbef065f4b
Signed-off-by: David Collins <collinsd@codeaurora.org>
Move the spm-regulator driver from the arch/arm/mach-msm
directory into the drivers/regulator directory. Moving this
driver out of the arch/arm/mach-msm directory allows it to be
shared with architectures other than 'arm'. In particular,
moving it allows it to be used by arm64.
Also move the header file for the spm-regulator driver from the
arch/arm/mach-msm directory into the include/linux/regulator
directory. Moving the header file requires updating all files
which include it.
Change-Id: I0c5a20a5f3512ef19c9cdb939342224d11667650
Signed-off-by: David Collins <collinsd@codeaurora.org>
Move the rpm-regulator-smd driver from the arch/arm/mach-msm
directory into the drivers/regulator directory. Also rename it
from rpm-regulator-smd.c to rpm-smd-regulator.c so that it
matches the naming scheme of the other regulator drivers. Moving
this driver out of the arch/arm/mach-msm directory allows it to
be shared with architectures other than 'arm'.
Also move the header file from the arch/arm/mach-msm/include/mach
directory into the include/linux/regulator directory. Moving the
header file requires updating all drivers which include it.
Change the compatible property values so that they match the new
driver name.
Change-Id: I20f2a4503c198ba9d1d04a77b03411dcc98e8aa1
Signed-off-by: David Collins <collinsd@codeaurora.org>
This change removes source files from the kernel tree that
were not being used during make. The list of used files
was generated using an annotated make log and was then
compared with new files added since the public release of
kernel version 3.10.00. New files which were added but
not used have been removed from the tree.
A diff was also run to determine the list of files that had
been modified since the release of kernel version 3.10.00.
These files were then scrubbed based on the current kernel
configuration, removing invalid and unused conditionals.
Some files which support planned functionality or are
useful in debugging have been excluded from this reap.
Change-Id: Ia44a224d3cea7bc78dd45e8a8279860d35d4b008
Signed-off-by: Ian Maund <imaund@codeaurora.org>
This driver supports OnSemi NCP6335D synchronous buck converter.
The NCP6335D is a step-down switching voltage regulator which
provides a voltage range from 0.6 to 1.4V. The regulator is
controlled via the I2C interface.
Change-Id: I237fe781d5c54d2b3ffc65096b9e83c387d3b6f5
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Add the qpnp-regulator driver to support regulators found in
Qualcomm plug-and-play (QPNP) PMIC chips. QPNP chips make use of
Qualcomm's SPMI register convention. The particular hardware
characteristics of a given regulator can be derived from the
values present in the type and subtype registers.
The qpnp-regulator driver supports probing with either device tree
device specification or with board file specified platform data.
Change-Id: I4f74431a50949763d651faf992b5d2567d05758e
Signed-off-by: David Collins <collinsd@codeaurora.org>
[sboyd: Squash in DT binding document]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add support for a dummy driver that has an implementation
connected to no real hardware devices. Its purpose is to aid
bringup scenarios by providing clients a regulator interface
that they expect. This driver shouldn't be enabled if a real
device implementation for a particular platform already exists.
Change-Id: Ib83027b4e599ebbc3cb153b2f346bb03495bb746
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
As a regulator driver, this xo buffer driver takes the vote from
client and controls (enable or disable) XO (crystal) buffers so
that XO clock output can be started or stopped.
Change-Id: Iccac863af2f56d66799d8fdb3320958014466d8d
Signed-off-by: Willie Ruan <wruan@codeaurora.org>
Create a new regulator driver, gpio-regulator, which wraps around a
GPIO that is the enable signal for a physical regulator.
Change-Id: I541a9a1cd3a6ffe3200ffaeee9f0f62db5e65795
Signed-off-by: David Collins <collinsd@codeaurora.org>
[sboyd: Moved to msm-gpio-regulator to not conflcit with
upstream's version of essentially the same driver]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Create a PM8XXX regulator driver that can support PMIC PM8921
variants including: PM8018, PM8038, and PM8921.
Change-Id: I60d1302e4af9a4c5caa72301c904867acd2ebe0f
Signed-off-by: David Collins <collinsd@codeaurora.org>
On 8x60 PMIC LDO/SMPS/LVS are controlled from the apps processor.
This driver talks directly to the PMIC over SSBI through the
PMIC8901 core driver. This driver utilizes the regulator framework
to enable, disable, and change regulator voltage levels.
Change-Id: I21c272a490a2526c2fde9fe3ef7590a57418269a
Signed-off-by: Bobby Crabtree <bobbyc@codeaurora.org>
On 8x60 PMIC LDO/SMPS/LVS are controlled from the apps processor.
This driver talks directly to the PMIC over SSBI through the
PMIC8058 core driver. This driver utilizes the regulator framework
to enable, disable, and change regulator voltage levels.
Change-Id: I25e24a3d2801d345d9f3943d54e34a563b6cc21a
Signed-off-by: Bobby Crabtree <bobbyc@quicinc.com>
Add a proxy consumer driver which can be used to ensure that a
given regulator maintains a certain minimum state during bootup.
Enable state, voltage, and current may be forced to specified
levels.
Change-Id: I0ccc63a41684462684ac737fb2f4129a3e6e4aea
Signed-off-by: David Collins <collinsd@codeaurora.org>
The ABx500 is capable of controlling three external regulator supplies.
Most commonly on and off are supported, but if an external regulator
chipset or power supply supports high-power and low-power mode settings,
we can control those too.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This patch is for new lp8755 regulator dirver and
several unsed variables were deleted and then test was done.
LP8755 :
The LP8755 is a high performance power management unit.It contains
six step-down DC-DC converters which can can be filexibly bundled
together in multiphase converters as required by application.
www.ti.com
Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The MAXIM MAX8973 high-efficiency, three phase, DC-DC step-down
switching regulator delievers up to 9A of output current. Each
phase operates at a 2MHz fixed frequency with a 120 deg shift
from the adjacent phase, allowing the use of small magnetic
component.
Add regulator driver for this device.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This is the Regulator patch for the DA9055 PMIC and has got dependency on
the DA9055 MFD core.
This patch support all of the DA9055 regulators. The output voltages are
fully programmable through I2C interface only. The platform data with regulation
constraints is passed down from the board to the regulator.
This patch is functionaly tested on SMDK6410 board. DA9055 Evaluation board
was connected to the SMDK6410 board.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add regulator driver for Texas Instrument TPS80031/TPS80032 device.
TPS80031/ TPS80032 Fully Integrated Power Management with Power
Path and Battery Charger. It has 5 configurable step-down
converters, 11 general purpose LDOs, VBUS generator and digital
output to control regulators.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Implementation of the regulator framework driver for the
Versatile Express voltage control. Devices without
voltage constraints (ie. "regulator-[min|max]-microvolt"
properties in the DT node) are treated as fixed (or rather
read-only) regulators.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The TPS51632 is a driverless step down controller with
serial control. Advanced features such as D-Cap+
architecture with overlapping pulse support and OSR
overshoot reduction provide fast transient response,
lowest output capacitance and high efficiency.
The TPS51632 supports both I2C and DVFS interfaces
(through PWM) for dynamic control of the output voltage
and current monitor telemetry.
Add regulator driver for TPS51632.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This driver supports Fairchild FAN53555 Digitally Programmable
TinyBuck Regulator. The FAN53555 is a step-down switching voltage
regulator that delivers a digitally programmable output from an
input voltage supply of 2.5V to 5.5V. The output voltage is
programmed through an I2C interface.
Signed-off-by: Yunfan Zhang <yfzhang@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The MAX8907 is an I2C-based power-management IC containing voltage
regulators, a reset controller, a real-time clock, and a touch-screen
controller.
The original driver was written by:
* Gyungoh Yoo <jack.yoo@maxim-ic.com>
Various fixes and enhancements by:
* Jin Park <jinyoungp@nvidia.com>
* Tom Cherry <tcherry@nvidia.com>
* Prashant Gaikwad <pgaikwad@nvidia.com>
* Dan Willemsen <dwillemsen@nvidia.com>
* Laxman Dewangan <ldewangan@nvidia.com>
During upstreaming, I (swarren):
* Converted to regmap.
* Allowed probing from device tree.
* Reworked the regulator driver to be represented as a single device that
provides multiple regulators, rather than as a device per regulator.
* Replaced many regulator ops with standard functions.
* Added ability to specify supplies for each regulator.
* Removed the WLED regulator. If/when we expose this in the driver, it
should be a backlight object not a regulator object.
* Renamed from max8907c->max8907, since the driver covers at least the
C and B revisions.
* General cleanup.
Signed-off-by: Gyungoh Yoo <jack.yoo@maxim-ic.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
TI LP8788 PMU has 4 BUCKS and 22 LDOs.
The voltage of BUCK1 and BUCK2 can be controlled by external gpios.
And some LDOs also can be enabled by external gpios.
The regmap interface is used for regulator operations.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This patch add Samsung S2MPS11 regulator driver.
The S2MPS11 can support 10 Bucks and 38 LDOs and RTC.
Especially, S2MPS11 is designed for high performance
Samsung application processor.
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Arizona class devices feature an integrated LDO which is intended to
supply the digital core for the device. Provide a driver offering
minimal control of this regulator.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The Wolfson Arizona platform is used for a range of low power audio hub
CODECs. Many of these devices feature an integrated power supply for the
microphone which is supported by this driver.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This driver supports TI/National LP8720, LP8725 PMIC.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Reviewed-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add driver for support max77686 regulator.
MAX77686 provides LDOs[1~26] and BUCKs[1~9]. It support to set or get the
volatege of regulator on max77686 chip with using regmap.
Signed-off-by: Chiwoong Byun <woong.byun@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add the Kconfig/Makefile stuff for the palmas regulator driver
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The RC5T583 PMIC from RICOH consists of 4 DCDC and 10
LDOs. This driver supports the control of different
regulator output through regulator interface.
This driver depends on MFD driver of RC5T583 and uses
mfd rc5t583 apis to communicate to device for accessing
different device's registers.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add TPS65090 regulator driver
TPS65090 PMIC from TI consists of 3 step down converters,
2 always on LDOs and 7 current limited load switches. The
output voltages are ON/OFF controllable and are meant to
supply power to the components on target board.
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The pxa regulator branch removes the bq24022 driver, while a lot of
other regulator drivers got added in the regulator tree. This
resolves the trivial conflicts by merging in the regulator patches
that are already merged into v3.4.
Conflicts:
drivers/regulator/Kconfig
drivers/regulator/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Anatop is an integrated regulator inside i.MX6 SoC.
There are 3 digital regulators which controls PU, CORE (ARM), and SOC.
And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB).
This patch adds the Anatop regulator driver.
Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Sort Kconfig entries by company name/driver in alphabetical order.
Sort Makefile entries by alphabetical order.
In order to group all the Kconfig entries by company name,
this patch also adds company name to some Kconfig entries.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The bq24022 driver is just a specialised form of a gpio-regulator.
As all former users of it now use the gpio-regulator directly, there
is no need to keep it around.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Some devices require a regulator to work, but boards may not have
a software controllable regulator for this device. Provide a helper
function to make it simpler for these boards to register a fixed
regulator as a dummy regulator.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This patch adds tps65217 PMIC as a regulator
The regulator module consists of 3 DCDCs and 4 LDOs. The output
voltages are configurable and are meant to supply power to the
main processor and other components
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This patch add Samsung S5M8767A pmic configuration.
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
As we progress with DB5500 and future voltage domain regulators
based on very similar hardware as found in the DB8500 PRCMU,
it makes sense to split off the generic parts and introduce
some generic debug code for the DBx500 regulators. This patch
accoplish a basic abstraction of the DBx500 voltage domain
regulators.
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
soyoung.min