Commit Graph

29 Commits

Author SHA1 Message Date
Sylwester Nawrocki 3ea9389656 regulator: wm8994: Use GPIO parsed from DT when registering regulators
Ensure the regulators are registered with a GPIO parsed from the device
tree when available.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-11 17:56:21 +01:00
Mark Brown e3d27775fc regulator: wm8994: Provide default init data
Almost all systems use the regulators on the WM8994 series devices to
provide DCVDD and AVDD1 so if no init data is supplied then set up the
supplies for the user. This simplifies integration of the device into
systems, especially when device tree is supported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-07 20:24:07 +01:00
Mark Brown 0565021655 regulator: wm8994: Convert to module_platform_driver()
The regulators can only be used to supply the CODEC so we don't need to
worry about users that still need fudges for init ordering issues.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-05 10:44:23 +01:00
Bill Pemberton 8dc995f56e regulator: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20 10:53:38 +09:00
Bill Pemberton a5023574d1 regulator: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20 10:31:26 +09:00
Bill Pemberton 5eb9f2b963 regulator: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20 10:31:19 +09:00
Mark Brown 495fd8c8fd regulator: wm8994: Use core GPIO enable support
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 20:29:29 +01:00
Mark Brown 00581b30ae regulator: wm8994: Set enable_time in descriptor
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 20:29:24 +01:00
Axel Lin f2d103add1 regulator: wm8994: Convert wm8994_ldo1_ops to regulator_[list|map]_voltage_linear
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03 13:25:05 +01:00
Mark Brown b68b45d77d regulator: wm8994: Allow registration with no platform data
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 15:25:33 +01:00
Mark Brown 5949a7e9ab Merge remote-tracking branch 'regulator/topic/drivers' into regulator-next
Conflicts:
	drivers/regulator/88pm8607.c (simple overlap with a bugfix in v3.4)
2012-05-12 11:10:25 +01:00
Mark Brown 5d0526eade regulator: wm8994: Use main I2C device as struct device
This makes logging a bit clearer as it gives the actual bus location and
makes things like board hookup a bit smoother.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08 18:41:07 +01:00
Mark Brown 09e3fd202d regulator: wm8994: Convert to gpio_request_one()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-07 18:23:44 +01:00
Mark Brown 633b6fcd5a regulator: wm8994: Use core voltage selector operations
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-16 19:52:29 +01:00
Mark Brown 9f29c9e30b regulator: wm8994: Convert to set_voltage_sel()
There's no need to implement set_voltage() as there is only a very small
range of selectors for the regulators in the WM8994 and the voltages are
not expected to vary frequently at runtime.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-15 12:07:50 +01:00
Mark Brown c172708d38 regulator: core: Use a struct to pass in regulator runtime configuration
Rather than adding new arguments to regulator_register() every time we
want to add a new bit of dynamic information at runtime change the function
to take these via a struct. By doing this we avoid needing to do further
changes like the recent addition of device tree support which required each
regulator driver to be updated to take an additional parameter.

The regulator_desc which should (mostly) be static data is still passed
separately as most drivers are able to configure this statically at build
time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 12:37:09 +01:00
Mark Brown 25e4d602f7 regulator: wm8994: Constify regulator_desc
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04 11:43:43 +01:00
Mark Brown b9e0348f20 regulator: wm8994: Convert to devm_kzalloc()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11 20:48:41 +00:00
Rajendra Nayak 2c043bcbf2 regulator: pass additional of_node to regulator_register()
With device tree support for regulators, its needed that the
regulator_dev->dev device has the right of_node attached.
To be able to do this add an additional parameter to the
regulator_register() api, wherein the dt-adapted driver can
then pass this additional info onto the regulator core.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23 18:47:04 +00:00
Mark Brown a1ff89ef3c regulator: Add WM1811 support
The WM1811 has a slightly different range on LDO2 to other WM8994 class
devices.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-07 12:49:18 +01:00
Mark Brown 2ae3636b79 regulator: Use _cansleep() for WM8994 regulator GPIOs
The WM8994 regulator driver is perfectly happy if the GPIO used to enable
the regulator sleeps so call the appropriate GPIO API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-30 11:56:58 +01:00
Linus Torvalds 66dc918d42 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (348 commits)
  ALSA: hda - Fix NULL-derefence with a single mic in STAC auto-mic detection
  ALSA: hda - Add missing NID 0x19 fixup for Sony VAIO
  ALSA: hda - Fix ALC275 enable hardware EQ for SONY VAIO
  ALSA: oxygen: fix Xonar DG input
  ALSA: hda - Fix EAPD on Lenovo NB ALC269 to low
  ALSA: hda - Fix missing EAPD for Acer 4930G
  ALSA: hda: Disable 4/6 channels on some NVIDIA GPUs.
  ALSA: hda - Add static_hdmi_pcm option to HDMI codec parser
  ALSA: hda - Don't refer ELD when unplugged
  ASoC: tpa6130a2: Fix compiler warning
  ASoC: tlv320dac33: Add DAPM selection for LOM invert
  ASoC: DMIC codec: Adding a generic DMIC codec
  ALSA: snd-usb-us122l: Fix missing NULL checks
  ALSA: snd-usb-us122l: Fix MIDI output
  ASoC: soc-cache: Fix invalid memory access during snd_soc_lzo_cache_sync()
  ASoC: Fix section mismatch in wm8995.c
  ALSA: oxygen: add S/PDIF source selection for Claro cards
  ALSA: oxygen: fix CD/MIDI for X-Meridian (2G)
  ASoC: fix migor audio build
  ALSA: include delay.h for msleep in Xonar DG support
  ...
2011-01-13 10:32:54 -08:00
Mark Brown d9f0f28717 regulator: Convert WM8994 to use get_voltage_sel()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12 14:33:04 +00:00
Mark Brown 3a93f2a9f4 regulator: Report actual configured voltage to set_voltage()
Change the interface used by set_voltage() to report the selected value
to the regulator core in terms of a selector used by list_voltage().
This allows the regulator core to know the voltage that was chosen
without having to do an explict get_voltage(), which would be much more
expensive as it will generally access hardware.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12 14:32:59 +00:00
Mark Brown 5a7743edac regulator: Update LDO2 for WM8958
LDO2 has a slightly different range of supported voltages on WM8958
so update the selector<->voltage mappings to match.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-13 17:36:10 +00:00
Joonyoung Shim c4604e49c1 regulator: Default GPIO controlled WM8994 regulators to disabled
This ensures that if the GPIO was not enabled prior to the driver
starting the regulator API will insert the required powerup ramp
delay when it enables the regulator.  The gpiolib API does not
provide this information.

[Rewrote changelog to describe the actual change -- broonie.]

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11 11:38:02 +01:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dmitry Torokhov 598b3578ab Regulators: wm8994 - clean up driver data after removal
It is a good tone to reset driver data after unbinding the device.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 14:49:29 +00:00
Mark Brown 69dc16c325 regulator: Add WM8994 regulator support
The WM8994 contains two LDOs with mixed hardware/software control to
minimise the number of external supplies required while delivering
optimal voltages to minimise power consumption.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-03 14:49:25 +00:00