-----BEGIN PGP SIGNATURE-----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=InCr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=J7vi
-----END PGP SIGNATURE-----
Merge 3.10.107 into android-msm-bullhead-3.10-oreo-m5
Changes in 3.10.107: (270 commits)
Revert "Btrfs: don't delay inode ref updates during log, replay"
Btrfs: fix memory leak in reading btree blocks
ext4: use more strict checks for inodes_per_block on mount
ext4: fix in-superblock mount options processing
ext4: add sanity checking to count_overhead()
ext4: validate s_first_meta_bg at mount time
jbd2: don't leak modified metadata buffers on an aborted journal
ext4: fix fencepost in s_first_meta_bg validation
ext4: trim allocation requests to group size
ext4: preserve the needs_recovery flag when the journal is aborted
ext4: return EROFS if device is r/o and journal replay is needed
ext4: fix inode checksum calculation problem if i_extra_size is small
block: fix use-after-free in sys_ioprio_get()
block: allow WRITE_SAME commands with the SG_IO ioctl
block: fix del_gendisk() vs blkdev_ioctl crash
dm crypt: mark key as invalid until properly loaded
dm space map metadata: fix 'struct sm_metadata' leak on failed create
md/raid5: limit request size according to implementation limits
md:raid1: fix a dead loop when read from a WriteMostly disk
md linear: fix a race between linear_add() and linear_congested()
CIFS: Fix a possible memory corruption during reconnect
CIFS: Fix missing nls unload in smb2_reconnect()
CIFS: Fix a possible memory corruption in push locks
CIFS: remove bad_network_name flag
fs/cifs: make share unaccessible at root level mountable
cifs: Do not send echoes before Negotiate is complete
ocfs2: fix crash caused by stale lvb with fsdlm plugin
ocfs2: fix BUG_ON() in ocfs2_ci_checkpointed()
can: raw: raw_setsockopt: limit number of can_filter that can be set
can: peak: fix bad memory access and free sequence
can: c_can_pci: fix null-pointer-deref in c_can_start() - set device pointer
can: ti_hecc: add missing prepare and unprepare of the clock
can: bcm: fix hrtimer/tasklet termination in bcm op removal
can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
ALSA: hda - Fix up GPIO for ASUS ROG Ranger
ALSA: seq: Fix race at creating a queue
ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
ALSA: timer: Reject user params with too small ticks
ALSA: seq: Fix link corruption by event error handling
ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()
ALSA: seq: Fix race during FIFO resize
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
usb: gadgetfs: restrict upper bound on device configuration size
USB: gadgetfs: fix unbounded memory allocation bug
USB: gadgetfs: fix use-after-free bug
USB: gadgetfs: fix checks of wTotalLength in config descriptors
xhci: free xhci virtual devices with leaf nodes first
USB: serial: io_ti: bind to interface after fw download
usb: gadget: composite: always set ep->mult to a sensible value
USB: cdc-acm: fix double usb_autopm_put_interface() in acm_port_activate()
USB: cdc-acm: fix open and suspend race
USB: cdc-acm: fix failed open not being detected
usb: dwc3: gadget: make Set Endpoint Configuration macros safe
usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
usb: dwc3: gadget: delay unmap of bounced requests
usb: hub: Wait for connection to be reestablished after port reset
usb: gadget: composite: correctly initialize ep->maxpacket
USB: UHCI: report non-PME wakeup signalling for Intel hardware
arm/xen: Use alloc_percpu rather than __alloc_percpu
xfs: set AGI buffer type in xlog_recover_clear_agi_bucket
xfs: clear _XBF_PAGES from buffers when readahead page
ssb: Fix error routine when fallback SPROM fails
drivers/gpu/drm/ast: Fix infinite loop if read fails
scsi: avoid a permanent stop of the scsi device's request queue
scsi: move the nr_phys_segments assert into scsi_init_io
scsi: don't BUG_ON() empty DMA transfers
scsi: storvsc: properly handle SRB_ERROR when sense message is present
scsi: storvsc: properly set residual data length on errors
target/pscsi: Fix TYPE_TAPE + TYPE_MEDIMUM_CHANGER export
scsi: lpfc: Add shutdown method for kexec
scsi: sr: Sanity check returned mode data
scsi: sd: Fix capacity calculation with 32-bit sector_t
s390/vmlogrdr: fix IUCV buffer allocation
libceph: verify authorize reply on connect
nfs_write_end(): fix handling of short copies
powerpc/ps3: Fix system hang with GCC 5 builds
sg_write()/bsg_write() is not fit to be called under KERNEL_DS
ftrace/x86: Set ftrace_stub to weak to prevent gcc from using short jumps to it
cred/userns: define current_user_ns() as a function
net: ti: cpmac: Fix compiler warning due to type confusion
tick/broadcast: Prevent NULL pointer dereference
netvsc: reduce maximum GSO size
drop_monitor: add missing call to genlmsg_end
drop_monitor: consider inserted data in genlmsg_end
igmp: Make igmp group member RFC 3376 compliant
HID: hid-cypress: validate length of report
Input: xpad - use correct product id for x360w controllers
Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000
Input: iforce - validate number of endpoints before using them
Input: kbtab - validate number of endpoints before using them
Input: joydev - do not report stale values on first open
Input: tca8418 - use the interrupt trigger from the device tree
Input: mpr121 - handle multiple bits change of status register
Input: mpr121 - set missing event capability
Input: i8042 - add Clevo P650RS to the i8042 reset list
i2c: fix kernel memory disclosure in dev interface
vme: Fix wrong pointer utilization in ca91cx42_slave_get
sysrq: attach sysrq handler correctly for 32-bit kernel
pinctrl: sh-pfc: Do not unconditionally support PIN_CONFIG_BIAS_DISABLE
x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F
qla2xxx: Fix crash due to null pointer access
ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs
ARM: dts: da850-evm: fix read access to SPI flash
NFSv4: Ensure nfs_atomic_open set the dentry verifier on ENOENT
vmxnet3: Wake queue from reset work
Fix memory leaks in cifs_do_mount()
Compare prepaths when comparing superblocks
Move check for prefix path to within cifs_get_root()
Fix regression which breaks DFS mounting
apparmor: fix uninitialized lsm_audit member
apparmor: exec should not be returning ENOENT when it denies
apparmor: fix disconnected bind mnts reconnection
apparmor: internal paths should be treated as disconnected
apparmor: check that xindex is in trans_table bounds
apparmor: add missing id bounds check on dfa verification
apparmor: don't check for vmalloc_addr if kvzalloc() failed
apparmor: fix oops in profile_unpack() when policy_db is not present
apparmor: fix module parameters can be changed after policy is locked
apparmor: do not expose kernel stack
vfio/pci: Fix integer overflows, bitmask check
bna: Add synchronization for tx ring.
sg: Fix double-free when drives detach during SG_IO
move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)
serial: 8250_pci: Detach low-level driver during PCI error recovery
bnx2x: Correct ringparam estimate when DOWN
tile/ptrace: Preserve previous registers for short regset write
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
ISDN: eicon: silence misleading array-bounds warning
ARC: [arcompact] handle unaligned access delay slot corner case
parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header
nfs: Don't increment lock sequence ID after NFS4ERR_MOVED
ipv6: addrconf: Avoid addrconf_disable_change() using RCU read-side lock
af_unix: move unix_mknod() out of bindlock
drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval
crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg
ata: sata_mv:- Handle return value of devm_ioremap.
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
mm, fs: check for fatal signals in do_generic_file_read()
ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixup
sched/debug: Don't dump sched debug info in SysRq-W
tcp: fix 0 divide in __tcp_select_window()
macvtap: read vnet_hdr_size once
packet: round up linear to header len
vfs: fix uninitialized flags in splice_to_pipe()
siano: make it work again with CONFIG_VMAP_STACK
futex: Move futex_init() to core_initcall
rtc: interface: ignore expired timers when enqueuing new timers
irda: Fix lockdep annotations in hashbin_delete().
tty: serial: msm: Fix module autoload
rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down
af_packet: remove a stray tab in packet_set_ring()
MIPS: Fix special case in 64 bit IP checksumming.
mm: vmpressure: fix sending wrong events on underflow
ipc/shm: Fix shmat mmap nil-page protection
sd: get disk reference in sd_check_events()
samples/seccomp: fix 64-bit comparison macros
ath5k: drop bogus warning on drv_set_key with unsupported cipher
rdma_cm: fail iwarp accepts w/o connection params
NFSv4: fix getacl ERANGE for some ACL buffer sizes
bcma: use (get|put)_device when probing/removing device driver
powerpc/xmon: Fix data-breakpoint
KVM: VMX: use correct vmcs_read/write for guest segment selector/base
KVM: PPC: Book3S PR: Fix illegal opcode emulation
KVM: s390: fix task size check
s390: TASK_SIZE for kernel threads
xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
mac80211: flush delayed work when entering suspend
drm/ast: Fix test for VGA enabled
drm/ttm: Make sure BOs being swapped out are cacheable
fat: fix using uninitialized fields of fat_inode/fsinfo_inode
drivers: hv: Turn off write permission on the hypercall page
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
crypto: improve gcc optimization flags for serpent and wp512
mtd: pmcmsp: use kstrndup instead of kmalloc+strncpy
cpmac: remove hopeless #warning
mvsas: fix misleading indentation
l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
net: don't call strlen() on the user buffer in packet_bind_spkt()
dccp: Unlock sock before calling sk_free()
tcp: fix various issues for sockets morphing to listen state
uapi: fix linux/packet_diag.h userspace compilation error
ipv6: avoid write to a possibly cloned skb
dccp: fix memory leak during tear-down of unsuccessful connection request
futex: Fix potential use-after-free in FUTEX_REQUEUE_PI
futex: Add missing error handling to FUTEX_REQUEUE_PI
give up on gcc ilog2() constant optimizations
cancel the setfilesize transation when io error happen
crypto: ghash-clmulni - Fix load failure
crypto: cryptd - Assign statesize properly
ACPI / video: skip evaluating _DOD when it does not exist
Drivers: hv: balloon: don't crash when memory is added in non-sorted order
s390/pci: fix use after free in dma_init
cpufreq: Fix and clean up show_cpuinfo_cur_freq()
igb: Workaround for igb i210 firmware issue
igb: add i211 to i210 PHY workaround
ipv4: provide stronger user input validation in nl_fib_input()
tcp: initialize icsk_ack.lrcvtime at session start time
ACM gadget: fix endianness in notifications
mmc: sdhci: Do not disable interrupts while waiting for clock
uvcvideo: uvc_scan_fallback() for webcams with broken chain
fbcon: Fix vc attr at deinit
crypto: algif_hash - avoid zero-sized array
virtio_balloon: init 1st buffer in stats vq
c6x/ptrace: Remove useless PTRACE_SETREGSET implementation
sparc/ptrace: Preserve previous registers for short regset write
metag/ptrace: Preserve previous registers for short regset write
metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS
metag/ptrace: Reject partial NT_METAG_RPIPE writes
libceph: force GFP_NOIO for socket allocations
ACPI: Fix incompatibility with mcount-based function graph tracing
ACPI / power: Avoid maybe-uninitialized warning
rtc: s35390a: make sure all members in the output are set
rtc: s35390a: implement reset routine as suggested by the reference
rtc: s35390a: improve irq handling
padata: avoid race in reordering
HID: hid-lg: Fix immediate disconnection of Logitech Rumblepad 2
HID: i2c-hid: Add sleep between POWER ON and RESET
drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
drm/vmwgfx: Remove getparam error message
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
Reset TreeId to zero on SMB2 TREE_CONNECT
metag/usercopy: Drop unused macros
metag/usercopy: Zero rest of buffer from copy_from_user
powerpc: Don't try to fix up misaligned load-with-reservation instructions
mm/mempolicy.c: fix error handling in set_mempolicy and mbind.
mtd: bcm47xxpart: fix parsing first block after aligned TRX
net/packet: fix overflow in check for priv area size
x86/vdso: Plug race between mapping and ELF header setup
iscsi-target: Fix TMR reference leak during session shutdown
iscsi-target: Drop work-around for legacy GlobalSAN initiator
xen, fbfront: fix connecting to backend
char: lack of bool string made CONFIG_DEVPORT always on
platform/x86: acer-wmi: setup accelerometer when machine has appropriate notify event
platform/x86: acer-wmi: setup accelerometer when ACPI device was found
mm: Tighten x86 /dev/mem with zeroing reads
virtio-console: avoid DMA from stack
catc: Combine failure cleanup code in catc_probe()
catc: Use heap buffer for memory size test
net: ipv6: check route protocol when deleting routes
Drivers: hv: don't leak memory in vmbus_establish_gpadl()
Drivers: hv: get rid of timeout in vmbus_open()
ubi/upd: Always flush after prepared for an update
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
powerpc: Reject binutils 2.24 when building little endian
net/packet: fix overflow in check for tp_frame_nr
net/packet: fix overflow in check for tp_reserve
tty: nozomi: avoid a harmless gcc warning
hostap: avoid uninitialized variable use in hfa384x_get_rid
gfs2: avoid uninitialized variable warning
net: neigh: guard against NULL solicit() method
sctp: listen on the sock only when it's state is listening or closed
ip6mr: fix notification device destruction
MIPS: Fix crash registers on non-crashing CPUs
RDS: Fix the atomicity for congestion map update
xen/x86: don't lose event interrupts
p9_client_readdir() fix
nfsd: check for oversized NFSv2/v3 arguments
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
tun: read vnet_hdr_sz once
printk: use rcuidle console tracepoint
ipv6: check raw payload size correctly in ioctl
x86: standardize mmap_rnd() usage
x86/mm/32: Enable full randomization on i386 and X86_32
mm: larger stack guard gap, between vmas
mm: fix new crash in unmapped_area_topdown()
Allow stack to grow up to address space limit
Linux 3.10.107
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Conflicts:
arch/x86/mm/mmap.c
drivers/mmc/host/sdhci.c
drivers/usb/host/xhci-plat.c
fs/ext4/super.c
kernel/sched/core.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJWz1zgAAoJEDjbvchgkmk+yU8P/10DITNzrhCfz5wbhvvn9Uvo
7H1DziOora3u9h8/rz6xqgFEz2/9cZ03KoLcpGha7kEFBsvgVhN3uSI0YFpVV2mT
8/oh1ADdkky3Pld0f7gDGydDvrmgqx83/69SQ8hDQ8Mr2QTaKNvK05QGC2/EO9kI
OcUAXjdAGglmf5rfhNhXodG/F2DtsA55uCzeyuBhcPE3bM7d4/48pwr1b2tW2CR8
hsprRvSz+kGgHXQy8jYdxKEI66OC/i22xVnxEc8PZmPZ0fFfmszzc9nzhcseWfpe
0JGgfwAtM8Va+bX4kfvqPpc2qR0r8Z2iEKNnAHnGutOvSWvow0l1OEedsb/+s1J6
/AYlPIkgTxwLDAwBIymPgowkEMOPVZzPL0tkoZI8wjB+eqUxxLlIa2dNByCyUs/U
1xTy+0UDMMDXG911mJl+yZFvd4R7lQUavIEStmMQ+A/Go2KrATaqIM8WETBlm7oH
s3hZ3E+RBWmfD/6JQwsJNkwv6yWeaRXNE+bj8C1r/uBdPyGqX9T22OaIOlio+I71
XBNEM5mrTlNeNVIUIKW29qmLBxBrH2LLwpv/dRyfOfzfhi1B+dl9+3sJauvrSmWi
jrR1khGmmaZcfOT2DVmpwlDQCQcyMcy8S8RTTAHhhuNmWtSjdc3TcfRlHXvP0sOu
ruXBufxernb94E7sqsvF
=LW9r
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fJ2P
-----END PGP SIGNATURE-----
Merge 3.10.98 into android-msm-bullhead-3.10-oreo-m5
Changes in 3.10.98: (55 commits)
ALSA: seq: Fix double port list deletion
wan/x25: Fix use-after-free in x25_asy_open_tty()
staging/speakup: Use tty_ldisc_ref() for paste kworker
pty: fix possible use after free of tty->driver_data
pty: make sure super_block is still valid in final /dev/tty close
AIO: properly check iovec sizes
ext4: fix potential integer overflow
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
perf: Fix inherited events vs. tracepoint filters
ptrace: use fsuid, fsgid, effective creds for fs access checks
tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines
tracing: Fix freak link error caused by branch tracer
klist: fix starting point removed bug in klist iterators
scsi: restart list search after unlock in scsi_remove_target
scsi_sysfs: Fix queue_ramp_up_period return code
iscsi-target: Fix rx_login_comp hang after login failure
Fix a memory leak in scsi_host_dev_release()
SCSI: Fix NULL pointer dereference in runtime PM
iscsi-target: Fix potential dead-lock during node acl delete
SCSI: fix crashes in sd and sr runtime PM
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
scsi_dh_rdac: always retry MODE SELECT on command lock violation
scsi: fix soft lockup in scsi_remove_target() on module removal
iio:ad7793: Fix ad7785 product ID
iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
iio: adis_buffer: Fix out-of-bounds memory access
iio: dac: mcp4725: set iio name property in sysfs
cifs: fix erroneous return value
nfs: Fix race in __update_open_stateid()
udf: limit the maximum number of indirect extents in a row
udf: Prevent buffer overrun with multi-byte characters
udf: Check output buffer length when converting name to CS0
ARM: 8519/1: ICST: try other dividends than 1
ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
fuse: break infinite loop in fuse_fill_write_pages()
mm: soft-offline: check return value in second __get_any_page() call
Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled
Input: elantech - mark protocols v2 and v3 as semi-mt
Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG
mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone()
xhci: Fix list corruption in urb dequeue at host removal
m32r: fix m32104ut_defconfig build fail
dma-debug: switch check from _text to _stext
scripts/bloat-o-meter: fix python3 syntax error
memcg: only free spare array when readers are done
radix-tree: fix race in gang lookup
radix-tree: fix oops after radix_tree_iter_retry
intel_scu_ipcutil: underflow in scu_reg_access()
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
futex: Drop refcount if requeue_pi() acquired the rtmutex
ip6mr: call del_timer_sync() in ip6mr_free_table()
module: wrapper for symbol name.
Linux 3.10.98
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
commit d2a145252c52792bc59e4767b486b26c430af4bb upstream.
A race between scanning and fc_remote_port_delete() may result in a
permanent stop if the device gets blocked before scsi_sysfs_add_sdev()
and unblocked after. The reason is that blocking a device sets both the
SDEV_BLOCKED state and the QUEUE_FLAG_STOPPED. However,
scsi_sysfs_add_sdev() unconditionally sets SDEV_RUNNING which causes the
device to be ignored by scsi_target_unblock() and thus never have its
QUEUE_FLAG_STOPPED cleared leading to a device which is apparently
running but has a stopped queue.
We actually have two places where SDEV_RUNNING is set: once in
scsi_add_lun() which respects the blocked flag and once in
scsi_sysfs_add_sdev() which doesn't. Since the second set is entirely
spurious, simply remove it to fix the problem.
Reported-by: Zengxi Chen <chenzengxi@huawei.com>
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 863e02d0e173bb9d8cea6861be22820b25c076cc upstream.
Writing a number to /sys/bus/scsi/devices/<sdev>/queue_ramp_up_period
returns the value of that number instead of the number of bytes written.
This behavior can confuse programs expecting POSIX write() semantics.
Fix this by returning the number of bytes written instead.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40998193560dab6c3ce8d25f4fa58a23e252ef38 upstream.
When dropping a lock while iterating a list we must restart the search
as other threads could have manipulated the list under us. Without this
we can get stuck in an endless loop. This bug was introduced by
commit bc3f02a795
Author: Dan Williams <djbw@fb.com>
Date: Tue Aug 28 22:12:10 2012 -0700
[SCSI] scsi_remove_target: fix softlockup regression on hot remove
Which was itself trying to fix a reported soft lockup issue
http://thread.gmane.org/gmane.linux.kernel/1348679
However, we believe even with this revert of the original patch, the soft
lockup problem has been fixed by
commit f2495e228fce9f9cec84367547813cbb0d6db15a
Author: James Bottomley <JBottomley@Parallels.com>
Date: Tue Jan 21 07:01:41 2014 -0800
[SCSI] dual scan thread bug fix
Thanks go to Dan Williams <dan.j.williams@intel.com> for tracking all this
prior history down.
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: bc3f02a795
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* commit 'v3.10.49': (529 commits)
Linux 3.10.49
ACPI / battery: Retry to get battery information if failed during probing
x86, ioremap: Speed up check for RAM pages
Score: Modify the Makefile of Score, remove -mlong-calls for compiling
Score: The commit is for compiling successfully.
Score: Implement the function csum_ipv6_magic
score: normalize global variables exported by vmlinux.lds
rtmutex: Plug slow unlock race
rtmutex: Handle deadlock detection smarter
rtmutex: Detect changes in the pi lock chain
rtmutex: Fix deadlock detector for real
ring-buffer: Check if buffer exists before polling
drm/radeon: stop poisoning the GART TLB
drm/radeon: fix typo in golden register setup on evergreen
ext4: disable synchronous transaction batching if max_batch_time==0
ext4: clarify error count warning messages
ext4: fix unjournalled bg descriptor while initializing inode bitmap
dm io: fix a race condition in the wake up code for sync_io
Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code
clk: spear3xx: Use proper control register offset
...
In addition to bringing in upstream commits, this merge also makes minor
changes to mainitain compatibility with upstream:
The definition of list_next_entry in qcrypto.c and ipa_dp.c has been
removed, as upstream has moved the definition to list.h. The implementation
of list_next_entry was identical between the two.
irq.c, for both arm and arm64 architecture, has had its calls to
__irq_set_affinity_locked updated to reflect changes to the API upstream.
Finally, as we have removed the sleep_length member variable of the
tick_sched struct, all changes made by upstream commit ec804bd do not
apply to our tree and have been removed from this merge. Only
kernel/time/tick-sched.c is impacted.
Change-Id: I63b7e0c1354812921c94804e1f3b33d1ad6ee3f1
Signed-off-by: Ian Maund <imaund@codeaurora.org>
commit e63ed0d7a98014fdfc2cfeb3f6dada313dcabb59 upstream.
This patch eliminates the reap_ref and replaces it with a proper kref.
On last put of this kref, the target is removed from visibility in
sysfs. The final call to scsi_target_reap() for the device is done from
__scsi_remove_device() and only if the device was made visible. This
ensures that the target disappears as soon as the last device is gone
rather than waiting until final release of the device (which is often
too long).
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until now the scsi mid-layer forbids runtime suspend till userspace
enables it. This is mainly to quarantine some disks with broken
runtime power management or have high latencies executing suspend
resume callbacks. If the userspace doesn't enable the runtime suspend
the underlying hardware will be always on even when it is not doing
any useful work and thus wasting power.
Some low-level drivers for the controllers can efficiently use runtime
power management to reduce power consumption and improve battery life.
Allow runtime suspend parameters override within the LLD itself
instead of waiting for userspace to control the power management.
Change-Id: I03e96a89d19c174deeb5bd4f94136c77073eb009
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Some well-known logical units might not have scsi upper-layer
drivers. In such cases, the runtime PM reference count increased
during device enumeration will not be decreased, causing the
parent device (host) to always be on even during idle.
Change-Id: I458007425231e5e245cd39494c9fb42a8d4cb9cd
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
store_host_reset() has tried to re-invent the wheel to compare sysfs strings.
Unfortunately it did so poorly and never bothered to check the input from
userspace before overwriting stack with it, so something simple as:
echo "WoopsieWoopsie" >
/sys/devices/pseudo_0/adapter0/host0/scsi_host/host0/host_reset
would result in:
[ 316.310101] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81f5bac7
[ 316.310101]
[ 316.320051] Pid: 6655, comm: sh Tainted: G W 3.7.0-rc5-next-20121114-sasha-00016-g5c9d68d-dirty #129
[ 316.320051] Call Trace:
[ 316.340058] pps pps0: PPS event at 1352918752.620355751
[ 316.340062] pps pps0: capture assert seq #303
[ 316.320051] [<ffffffff83b3856b>] panic+0xcd/0x1f4
[ 316.320051] [<ffffffff81f5bac7>] ? store_host_reset+0xd7/0x100
[ 316.320051] [<ffffffff8110b996>] __stack_chk_fail+0x16/0x20
[ 316.320051] [<ffffffff81f5bac7>] store_host_reset+0xd7/0x100
[ 316.320051] [<ffffffff81e55bb3>] dev_attr_store+0x13/0x30
[ 316.320051] [<ffffffff812f7db1>] sysfs_write_file+0x101/0x170
[ 316.320051] [<ffffffff8127acc8>] vfs_write+0xb8/0x180
[ 316.320051] [<ffffffff8127ae80>] sys_write+0x50/0xa0
[ 316.320051] [<ffffffff83c03418>] tracesys+0xe1/0xe6
Fix this by uninventing whatever was going on there and just use sysfs_streq.
Bug introduced by 29443691 ("[SCSI] scsi: Added support for adapter and
firmware reset").
[jejb: added necessary const to prevent compile warnings]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: <stable@vger.kernel.org> #3.2+
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
John reports:
BUG: soft lockup - CPU#2 stuck for 23s! [kworker/u:8:2202]
[..]
Call Trace:
[<ffffffff8141782a>] scsi_remove_target+0xda/0x1f0
[<ffffffff81421de5>] sas_rphy_remove+0x55/0x60
[<ffffffff81421e01>] sas_rphy_delete+0x11/0x20
[<ffffffff81421e35>] sas_port_delete+0x25/0x160
[<ffffffff814549a3>] mptsas_del_end_device+0x183/0x270
...introduced by commit 3b661a9 "[SCSI] fix hot unplug vs async scan race".
Don't restart lookup of more stargets in the multi-target case, just
arrange to traverse the list once, on the assumption that new targets
are always added at the end. There is no guarantee that the target will
change state in scsi_target_reap() so we can end up spinning if we
restart.
Cc: <stable@vger.kernel.org>
Acked-by: Jack Wang <jack_wang@usish.com>
LKML-Reference: <CAEhu1-6wq1YsNiscGMwP4ud0Q+MrViRzv=kcWCQSBNc8c68N5Q@mail.gmail.com>
Reported-by: John Drescher <drescherjm@gmail.com>
Tested-by: John Drescher <drescherjm@gmail.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
The following crash results from cases where the end_device has been
removed before scsi_sysfs_add_sdev has had a chance to run.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
IP: [<ffffffff8115e100>] sysfs_create_dir+0x32/0xb6
...
Call Trace:
[<ffffffff8125e4a8>] kobject_add_internal+0x120/0x1e3
[<ffffffff81075149>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff8125e641>] kobject_add_varg+0x41/0x50
[<ffffffff8125e70b>] kobject_add+0x64/0x66
[<ffffffff8131122b>] device_add+0x12d/0x63a
[<ffffffff814b65ea>] ? _raw_spin_unlock_irqrestore+0x47/0x56
[<ffffffff8107de15>] ? module_refcount+0x89/0xa0
[<ffffffff8132f348>] scsi_sysfs_add_sdev+0x4e/0x28a
[<ffffffff8132dcbb>] do_scan_async+0x9c/0x145
...teach scsi_sysfs_add_devices() to check for deleted devices() before
trying to add them, and teach scsi_remove_target() how to remove targets
that have not been added via device_add().
Cc: <stable@vger.kernel.org>
Reported-by: Dariusz Majchrzak <dariusz.majchrzak@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Avoid that the code for requeueing SCSI requests triggers a
crash by making sure that that code isn't scheduled anymore
after a device has been removed.
Also, source code inspection of __scsi_remove_device() revealed
a race condition in this function: no new SCSI requests must be
accepted for a SCSI device after device removal started.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Use blk_queue_dead() to test whether the queue is dead instead
of !sdev. Since scsi_prep_fn() may be invoked concurrently with
__scsi_remove_device(), keep the queuedata (sdev) pointer in
__scsi_remove_device(). This patch fixes a kernel oops that
can be triggered by USB device removal. See also
http://www.spinics.net/lists/linux-scsi/msg56254.html.
Other changes included in this patch:
- Swap the blk_cleanup_queue() and kfree() calls in
scsi_host_dev_release() to make that code easier to grasp.
- Remove the queue dead check from scsi_run_queue() since the
queue state can change anyway at any point in that function
where the queue lock is not held.
- Remove the queue dead check from the start of scsi_request_fn()
since it is redundant with the scsi_device_online() check.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This patch adds a new state SDEV_TRANSPORT_OFFLINE. It will
be used by transport classes to offline devices for cases like
when the fast_io_fail/recovery_tmo fires. In those cases we
want all IO to fail, and we have not yet escalated to dev_loss_tmo
behavior where we are removing the devices.
Currently to handle this state, transport classes are setting
the scsi_device's state to running, setting their internal
session/port structs state to something that indicates failed,
and then failing IO from some transport check in the queuecommand.
The reason for the new value is so that users can distinguish
between a device failure that is a result of a transport problem
vs the wide range of errors that devices get offlined for
when a scsi command times out and we offline the devices there.
It also fixes the confusion as to why the transport class is
failing IO, but has set the device state from blocked to running.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Added new sysfs attr 'host_reset' in scsi_sysfs.c to
perform adapter or firmware reset as suggested by
Mike Christie here:
http://marc.info/?l=linux-scsi&m=127359347111167&w=2
user/application can write "adapter" or "firmware" on
this attr and it will call newly added function hook
in scsi_host_template to call LDD adapter or firmware
reset implementation.
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
In certain circumstances, we can get an oops from a torn down device.
Most notably this is from CD roms trying to call scsi_ioctl. The root
cause of the problem is the fact that after scsi_remove_device() has
been called, the queue is fully torn down. This is actually wrong
since the queue can be used until the sdev release function is called.
Therefore, we add an extra reference to the queue which is released in
sdev->release, so the queue always exists.
Reported-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <jbottomley@parallels.com>
SCSI uses request_queue->queuedata == NULL as a signal that the queue
is dying. We set this state in the sdev release function. However,
this allows a small window where we release the last reference but
haven't quite got to this stage yet and so something will try to take
a reference in scsi_request_fn and oops. It's very rare, but we had a
report here, so we're pushing this as a bug fix
The actual fix is to set request_queue->queuedata to NULL in
scsi_remove_device() before we drop the reference. This causes
correct automatic rejects from scsi_request_fn as people who hold
additional references try to submit work and prevents anything from
getting a new reference to the sdev that way.
Cc: stable@kernel.org
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP ||
CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be
replaced with CONFIG_PM.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
This trivial patch (as1338) makes two uninformative error messages in
scsi_sysfs_add_sdev() more explicit.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Removing SCSI devices through
echo 1 > /sys/bus/scsi/devices/ ... /delete
while the FC transport class removes the SCSI target can lead to an
oops:
Unable to handle kernel pointer dereference at virtual kernel address 00000000b6815000
Oops: 0011 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: sunrpc qeth_l3 binfmt_misc dm_multipath scsi_dh dm_mod ipv6 qeth ccwgroup [last unloaded: scsi_wait_scan]
CPU: 1 Not tainted 2.6.35.5-45.x.20100924-s390xdefault #1
Process fc_wq_0 (pid: 861, task: 00000000b7331240, ksp: 00000000b735bac0)
Krnl PSW : 0704200180000000 00000000003ff6e4 (__scsi_remove_device+0x24/0xd0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
Krnl GPRS: 0000000000000001 0000000000000000 00000000b6815000 00000000bc24a8c0
00000000003ff7c8 000000000056dbb8 0000000000000002 0000000000835d80
ffffffff00000000 0000000000001000 00000000b6815000 00000000bc24a7f0
00000000b68151a0 00000000b6815000 00000000b735bc20 00000000b735bbf8
Krnl Code: 00000000003ff6d6: a7840001 brc 8,3ff6d8
00000000003ff6da: a7fbffd8 aghi %r15,-40
00000000003ff6de: e3e0f0980024 stg %r14,152(%r15)
>00000000003ff6e4: e31021200004 lg %r1,288(%r2)
00000000003ff6ea: a71f0000 cghi %r1,0
00000000003ff6ee: a7a40011 brc 10,3ff710
00000000003ff6f2: a7390003 lghi %r3,3
00000000003ff6f6: c0e5ffffc8b1 brasl %r14,3f8858
Call Trace:
([<0000000000001000>] 0x1000)
[<00000000003ff7d2>] scsi_remove_device+0x42/0x54
[<00000000003ff8ba>] __scsi_remove_target+0xca/0xfc
[<00000000003ff99a>] __remove_child+0x3a/0x48
[<00000000003e3246>] device_for_each_child+0x72/0xbc
[<00000000003ff93a>] scsi_remove_target+0x4e/0x74
[<0000000000406586>] fc_rport_final_delete+0xb2/0x23c
[<000000000015d080>] worker_thread+0x200/0x344
[<000000000016330c>] kthread+0xa0/0xa8
[<0000000000106c1a>] kernel_thread_starter+0x6/0xc
[<0000000000106c14>] kernel_thread_starter+0x0/0xc
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<00000000003ff7cc>] scsi_remove_device+0x3c/0x54
The function __scsi_remove_target iterates through the SCSI devices on
the host, but it drops the host_lock before calling
scsi_remove_device. When the SCSI device is deleted from another
thread, the pointer to the SCSI device in scsi_remove_device can
become invalid. Fix this by getting a reference to the SCSI device
before dropping the host_lock to keep the SCSI device alive for the
call to scsi_remove_device.
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Some controllers have a hardware limit on the number of protection
information scatter-gather list segments they can handle.
Introduce a max_integrity_segments limit in the block layer and provide
a new scsi_host_template setting that allows HBA drivers to provide a
value suitable for the hardware.
Add support for honoring the integrity segment limit when merging both
bios and requests.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
Fake "address-of" expressions that evaluate to NULL generally confuse
readers and can provoke compiler warnings. This patch (as1411) removes
one such fake expression, using an "#ifdef" in its place.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch (as1398b) adds runtime PM support to the SCSI layer. Only
the machanism is provided; use of it is up to the various high-level
drivers, and the patch doesn't change any of them. Except for sg --
the patch expicitly prevents a device from being runtime-suspended
while its sg device file is open.
The implementation is simplistic. In general, hosts and targets are
automatically suspended when all their children are asleep, but for
them the runtime-suspend code doesn't actually do anything. (A host's
runtime PM status is propagated up the device tree, though, so a
runtime-PM-aware lower-level driver could power down the host adapter
hardware at the appropriate times.) There are comments indicating
where a transport class might be notified or some other hooks added.
LUNs are runtime-suspended by calling the drivers' existing suspend
handlers (and likewise for runtime-resume). Somewhat arbitrarily, the
implementation delays for 100 ms before suspending an eligible LUN.
This is because there typically are occasions during bootup when the
same device file is opened and closed several times in quick
succession.
The way this all works is that the SCSI core increments a device's
PM-usage count when it is registered. If a high-level driver does
nothing then the device will not be eligible for runtime-suspend
because of the elevated usage count. If a high-level driver wants to
use runtime PM then it can call scsi_autopm_put_device() in its probe
routine to decrement the usage count and scsi_autopm_get_device() in
its remove routine to restore the original count.
Hosts, targets, and LUNs are not suspended while they are being probed
or removed, or while the error handler is running. In fact, a fairly
large part of the patch consists of code to make sure that things
aren't suspended at such times.
[jejb: fix up compile issues in PM config variations]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This patch (as1397b) converts the SCSI midlayer to use the new PM
callbacks (struct dev_pm_ops). A new source file, scsi_pm.c, is
created to hold the new callback routines, and the existing
suspend/resume code is moved there.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This patch fixes sdev_rw_attr() macro for scsi device sysfs entries.
It seems there is no such function snscanf in the current linux kernel,
so it fails to compile scsi driver when someone try to add a new rw entry.
This has been unfixed for a long time probably because current scsi device
has no rw entries.
# grep snscanf . -rn
./drivers/scsi/scsi_sysfs.c:489: snscanf (buf, 20, format_string, &sdev->field); \
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This patch (as1358) fixes a bug in the error pathway of
scsi_target_add(). If registration fails, the target should not be
reaped. The reaping occurs later, when scanning is finished and all
the child devices are removed. The current code leaves an unbalanced
value in starget->reap_ref.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Set power.async_suspend for all SCSI devices, targets and hosts, so
that they can be suspended and resumed in parallel with the main
suspend/resume thread and possibly with other devices they don't
depend on in a known way (i.e. devices which are not their parents or
children).
The power.async_suspend flag is also set for devices that don't have
suspend or resume callbacks, because otherwise they would make the
main suspend/resume thread wait for their "asynchronous" children
(during suspend) or parents (during resume), effectively negating the
possible gains from executing these devices' suspend and resume
callbacks asynchronously.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch (as1335) fixes a bug in scsi_sysfs_add_sdev(). Its callers
always remove the device if anything goes wrong, so it should never
remove the device.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits)
[SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP
[SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class
[SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED
[SCSI] zfcp: Update FSF error reporting
[SCSI] zfcp: Improve ELS ADISC handling
[SCSI] zfcp: Simplify handling of ct and els requests
[SCSI] zfcp: Remove ZFCP_DID_MASK
[SCSI] zfcp: Move WKA port to zfcp FC code
[SCSI] zfcp: Use common code definitions for FC CT structs
[SCSI] zfcp: Use common code definitions for FC ELS structs
[SCSI] zfcp: Update FCP protocol related code
[SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport
[SCSI] zfcp: Assign scheduled work to driver queue
[SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore
[SCSI] zfcp: Implement module unloading
[SCSI] zfcp: Merge trace code for fsf requests in one function
[SCSI] zfcp: Access ports and units with container_of in sysfs code
[SCSI] zfcp: Remove suspend callback
[SCSI] zfcp: Remove global config_mutex
[SCSI] zfcp: Replace local reference counting with common kref
...
Current FC HBA queue_depth ramp up code depends on last queue
full time. The sdev already has last_queue_full_time field to
track last queue full time but stored value is truncated by
last four bits.
So this patch updates last_queue_full_time without truncating
last 4 bits to store full value and then updates its only
current usages in scsi_track_queue_full to ignore last four bits
to keep current usages same while also use this field
in added ramp up code.
Adds scsi_handle_queue_ramp_up to ramp up queue_depth on
successful completion of IO. The scsi_handle_queue_ramp_up will
do ramp up on all luns of a target, just same as ramp down done
on all luns on a target.
The ramp up is skipped in case the change_queue_depth is not
supported by LLD or already reached to added max_queue_depth.
Updates added max_queue_depth on every new update to default
queue_depth value.
The ramp up is also skipped if lapsed time since either last
queue ramp up or down is less than LLD specified
queue_ramp_up_period.
Adds queue_ramp_up_period to sysfs but only if change_queue_depth
is supported since ramp up and queue_ramp_up_period is needed only
in case change_queue_depth is supported first.
Initializes queue_ramp_up_period to 120HZ jiffies as initial
default value, it is same as used in existing lpfc and qla2xxx.
-v2
Combined all ramp code into this single patch.
-v3
Moves max_queue_depth initialization after slave_configure is
called from after slave_alloc calling done. Also adjusted
max_queue_depth check to skip ramp up if current queue_depth
is >= max_queue_depth.
-v4
Changes sdev->queue_ramp_up_period unit to ms when using sysfs i/f
to store or show its value.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Tested-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This patch modifies scsi_host_template->change_queue_depth so that
it takes an argument indicating why it is being called. This will be
used so that if a LLD needs to do some extra processing when
handling queue fulls or later ramp ups, it can do so.
This is a simple port of the drivers setting a change_queue_depth
callback. In the patch I just have these LLDs adjust the queue depth
if the user was requesting it.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
[Vasu.Dev: v2
Also converted pmcraid_change_queue_depth and then verified
all modules compile using "make allmodconfig" for any new build
warnings on X86_64.
Updated original description after combing two original
patches from Mike to make this patch git bisectable.]
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
[jejb: fixed up 53c700]
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Async scanning introduced a very wide window where the SCSI device is
up and running but has not yet been added to sysfs. We delay the
adding until all scans have completed to retain the same ordering as
sync scanning.
This delay in visibility causes an oops if a device is removed before
we make it visible because the SCSI removal routines have an inbuilt
assumption that if a device is in SDEV_RUNNING state, it must be
visible (which is not necessarily true in the async scanning case).
Fix this by introducing an additional is_visible flag which we can use
to condition the tear down so we do the right thing for running but
not yet made visible.
Reported-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
The root cause of the problem is the fact that dev_set_name() now
allocates storage instead of using the original array within the kobj.
That means that the SCSI assumption that if you haven't made the
containing object or any sub objects visible, you can just destroy it
(and its component devices) lock stock and barrel becomes false.
Fix this by doing the get of sdev_dev at parent time and thus do an
extra put of it in scsi_destroy_sdev() (and all other destruction
without add paths).
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Let attribute group vectors be declared "const". We'd
like to let most attribute metadata live in read-only
sections... this is a start.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If a SCSI ULD driver sets blk_queue_prep_rq(), it should clean it
up itself on remove(), and not from the bus callbacks. This
removes the need to hook into bus->remove(), which should not
be used at the same time as driver->remove().
[jejb: fix sdkp initialisation problem due to mismerge]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Warning(linux-2.6.28-git13//drivers/scsi/scsi_sysfs.c:1049): Excess function parameter 'dev' description in 'scsi_sysfs_add_host'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[jejb: limit ioctl to returning 20 characters to avoid overrun
on long device names and add a few more conversions]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)
[SCSI] zfcp: fix double dbf id usage
[SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev
[SCSI] zfcp: fix erp list usage without using locks
[SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport
[SCSI] zfcp: fix deadlock caused by shared work queue tasks
[SCSI] zfcp: put threshold data in hba trace
[SCSI] zfcp: Simplify zfcp data structures
[SCSI] zfcp: Simplify get_adapter_by_busid
[SCSI] zfcp: remove all typedefs and replace them with standards
[SCSI] zfcp: attach and release SAN nameserver port on demand
[SCSI] zfcp: remove unused references, declarations and flags
[SCSI] zfcp: Update message with input from review
[SCSI] zfcp: add queue_full sysfs attribute
[SCSI] scsi_dh: suppress comparison warning
[SCSI] scsi_dh: add Dell product information into rdac device handler
[SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
[SCSI] qla2xxx: fix printk format warnings
[SCSI] qla2xxx: Update version number to 8.02.01-k8.
[SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
[SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
...
Right now SCSI and others do their own command timeout handling.
Move those bits to the block layer.
Instead of having a timer per command, we try to be a bit more clever
and simply have one per-queue. This avoids the overhead of having to
tear down and setup a timer for each command, so it will result in a lot
less timer fiddling.
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Brian King <brking@linux.vnet.ibm.com> reported that fibre channel
devices can oops during scanning if their ports block (because the
device goes from CREATED -> BLOCK -> RUNNING rather than CREATED ->
BLOCK -> CREATED).
Fix this by adding a new state: CREATED_BLOCK which can only transition
back to CREATED and disallow the CREATED -> BLOCK transition. Now both
the created and blocked states that the mid-layer recognises can include
CREATED_BLOCK.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Controllers that support protection information must indicate this to
the SCSI midlayer so that the ULD can prepare scsi_cmnds accordingly.
This patch implements a host mask and various types of protection:
- DIF Type 1-3 (between HBA and disk)
- DIX Type 0-3 (between OS and HBA)
The patch also allows the HBA to set the guard type to something
different than the T10-mandated CRC.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Some of the storage devices (that can be accessed through multiple paths),
do need some special handling for
1. Activating the passive path of the storage access.
2. Decode and handle the special sense codes returned by the devices.
3. Handle the I/Os being sent to the passive path, especially
during the device probe time.
when accessed through multiple paths.
As of today this special device handling is done at the dm-multipath
layer using dm-handlers. That works well for (1); for (2) to be handled
at dm layer, scsi sense information need to be exported from SCSI to dm-layer,
which is not very attractive; (3) cannot be done at all at the dm layer.
Device handler has been moved to SCSI mainly to handle (2) and (3) properly.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
> BUG: unable to handle kernel paging request at e6f17fac
> IP: [<c02604d6>] scsi_bus_uevent+0x1/0x17
> *pde = 2714b163 *pte = 26f17160
> Oops: 0000 [#1] DEBUG_PAGEALLOC
> last sysfs file:
>
> Pid: 1, comm: swapper Not tainted (2.6.26-rc2-next-20080516skw #30)
> EIP: 0060:[<c02604d6>] EFLAGS: 00010282 CPU: 0
> EIP is at scsi_bus_uevent+0x1/0x17
> EAX: e6f18014 EBX: e6f18014 ECX: c02604d5 EDX: e7173000
> ESI: e7173000 EDI: e7173000 EBP: e7851ca0 ESP: e7851c90
> DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
The problem is caused by:
commit b0ed43360f
Author: Hannes Reinecke <hare@suse.de>
Date: Tue Mar 18 14:32:28 2008 +0100
[SCSI] add scsi_host and scsi_target to scsi_bus
which added scsi_bus_type to the struct scsi_target device. This
causes both the scsi_device and scsi_target to fire scsi_bus_uevents.
However, the actualy scsi_bus_uevent() call assumes blindly that it's
a struct scsi_device. Check for this and return immediately if it
isn't.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Nathan Chancellor