Commit Graph

12 Commits

Author SHA1 Message Date
Paul Gortmaker de47725421 include: replace linux/module.h with "struct module" wherever possible
The <linux/module.h> pretty much brings in the kitchen sink along
with it, so it should be avoided wherever reasonably possible in
terms of being included from other commonly used <linux/something.h>
files, as it results in a measureable increase on compile times.

The worst culprit was probably device.h since it is used everywhere.
This file also had an implicit dependency/usage of mutex.h which was
masked by module.h, and is also fixed here at the same time.

There are over a dozen other headers that simply declare the
struct instead of pulling in the whole file, so follow their lead
and simply make it a few more.

Most of the implicit dependencies on module.h being present by
these headers pulling it in have been now weeded out, so we can
finally make this change with hopefully minimal breakage.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:32 -04:00
Paul Gortmaker eb5589a8f0 include: convert various register fcns to macros to avoid include chaining
The original implementations reference THIS_MODULE in an inline.
We could include <linux/export.h>, but it is better to avoid chaining.

Fortunately someone else already thought of this, and made a similar
inline into a #define in <linux/device.h> for device_schedule_callback(),
[see commit 523ded71de] so follow that precedent here.

Also bubble up any __must_check that were used on the prev. wrapper inline
functions up one to the real __register functions, to preserve any prev.
sanity checks that were used in those instances.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:32 -04:00
Kai Jiang 27a90700a4 uio: Support physical addresses >32 bits on 32-bit systems
To support >32-bit physical addresses for UIO_MEM_PHYS type we need to
extend the width of 'addr' in struct uio_mem.  Numerous platforms like
embedded PPC, ARM, and X86 have support for systems with larger physical
address than logical.

Since 'addr' may contain a physical, logical, or virtual address the
easiest solution is to just change the type to 'phys_addr_t' which
should always be greater than or equal to the sizeof(void *) such that
it can properly hold any of the address types.

For physical address we can support up to a 44-bit physical address on a
typical 32-bit system as we utilize remap_pfn_range() for the mapping of
the memory region and pfn's are represnted by shifting the address by
the page size (typically 4k).

Signed-off-by: Kai Jiang <Kai.Jiang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18 11:18:57 -07:00
Hans J. Koch 318af55ddd uio: Change mail address of Hans J. Koch
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-10 16:57:11 -08:00
Eric W. Biederman 6427a7655a uio: Cleanup irq handling.
Change the value of UIO_IRQ_NONE -2 to 0.  0 is well defined in the rest
of the kernel as the value to indicate an irq has not been assigned.

Update the calls to request_irq and free_irq to only ignore UIO_IRQ_NONE
and UIO_IRQ_CUSTOM allowing the rest of the kernel's possible irq
numbers to be used.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:16:43 -07:00
Hans J. Koch 8205779114 UIO: Add name attributes for mappings and port regions
If a UIO device has several memory mappings, it can be difficult for userspace
to find the right one. The situation becomes even worse if the UIO driver can
handle different versions of a card that have different numbers of mappings.
Benedikt Spranger has such cards and pointed this out to me. Thanks, Bene!

To address this problem, this patch adds "name" sysfs attributes for each
mapping. Userspace can use these to clearly identify each mapping. The name
string is optional. If a driver doesn't set it, an empty string will be
returned, so this patch won't break existing drivers.

The same problem exists for port region information, so a "name" attribute is
added there, too.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:24 -07:00
Stephen Rothwell b8ac9fc0e8 uio: make uio_info's name and version const
These are only ever assigned constant strings and never modified.

This was noticed because Wolfram Sang needed to cast the result of
of_get_property() in order to assign it to the name field of a struct
uio_info.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:44 -08:00
Hans J. Koch e70c412ee4 UIO: Pass information about ioports to userspace (V2)
Devices sometimes have memory where all or parts of it can not be mapped to
userspace. But it might still be possible to access this memory from
userspace by other means. An example are PCI cards that advertise not only
mappable memory but also ioport ranges. On x86 architectures, these can be
accessed with ioperm, iopl, inb, outb, and friends. Mike Frysinger (CCed)
reported a similar problem on Blackfin arch where it doesn't seem to be easy
to mmap non-cached memory but it can still be accessed from userspace.

This patch allows kernel drivers to pass information about such ports to
userspace. Similar to the existing mem[] array, it adds a port[] array to
struct uio_info. Each port range is described by start, size, and porttype.

If a driver fills in at least one such port range, the UIO core will simply
pass this information to userspace by creating a new directory "portio"
underneath /sys/class/uio/uioN/. Similar to the "mem" directory, it will
contain a subdirectory (portX) for each port range given.

Note that UIO simply passes this information to userspace, it performs no
action whatsoever with this data. It's userspace's responsibility to obtain
access to these ports and to solve arch dependent issues. The "porttype"
attribute tells userspace what kind of port it is dealing with.

This mechanism could also be used to give userspace information about GPIOs
related to a device. You frequently find such hardware in embedded devices,
so I added a UIO_PORT_GPIO definition. I'm not really sure if this is a good
idea since there are other solutions to this problem, but it won't hurt much
anyway.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:44 -08:00
Uwe Kleine-König 6d8333c24d UIO: minor style and comment fixes
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
2008-07-21 21:54:55 -07:00
Hans J. Koch 328a14e70e UIO: Add write function to allow irq masking
Sometimes it is necessary to enable/disable the interrupt of a UIO device
from the userspace part of the driver. With this patch, the UIO kernel driver
can implement an "irqcontrol()" function that does this. Userspace can write
an s32 value to /dev/uioX (usually 0 or 1 to turn the irq off or on). The
UIO core will then call the driver's irqcontrol function.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:55 -07:00
Greg Kroah-Hartman 81e7c6a636 UIO: fix kobject usage
The uio kobject code is "wierd".  This patch should hopefully fix it up
to be sane and not leak memory anymore.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:26 -08:00
Hans J. Koch beafc54c4e UIO: Add the User IO core code
This interface allows the ability to write the majority of a driver in
userspace with only a very small shell of a driver in the kernel itself.
It uses a char device and sysfs to interact with a userspace process to
process interrupts and control memory accesses.

See the docbook documentation for more details on how to use this
interface.

From: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 15:57:15 -07:00