commit 734df5ab549ca44f40de0f07af1c8803856dfb18 upstream.
Currently when the child context for inherited events is
created, it's based on the pmu object of the first event
of the parent context.
This is wrong for the following scenario:
- HW context having HW and SW event
- HW event got removed (closed)
- SW event stays in HW context as the only event
and its pmu is used to clone the child context
The issue starts when the cpu context object is touched
based on the pmu context object (__get_cpu_context). In
this case the HW context will work with SW cpu context
ending up with following WARN below.
Fixing this by using parent context pmu object to clone
from child context.
Addresses the following warning reported by Vince Weaver:
[ 2716.472065] ------------[ cut here ]------------
[ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x)
[ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn
[ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2
[ 2716.476035] Hardware name: AOpen DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2
[ 2716.476035] 0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18
[ 2716.476035] ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad
[ 2716.476035] ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550
[ 2716.476035] Call Trace:
[ 2716.476035] [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70
[ 2716.476035] [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f
[ 2716.476035] [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194
[ 2716.476035] [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c
[ 2716.476035] [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394
[ 2716.476035] [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98
[ 2716.476035] [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad
[ 2716.476035] [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1
[ 2716.476035] [<ffffffff8100205d>] ? do_signal+0x3c/0x432
[ 2716.476035] [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141
[ 2716.476035] [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90
[ 2716.476035] [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118
[ 2716.476035] [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c
[ 2716.476035] [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6
[ 2716.476035] [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d
[ 2716.476035] [<ffffffff813654f5>] ? retint_signal+0x3d/0x78
[ 2716.476035] ---[ end trace 827178d8a5966c3d ]---
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1373384651-6109-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
trinity fuzzer triggered WARN_ONCE("Can't find any breakpoint
slot") in arch_install_hw_breakpoint() but the problem is not
arch-specific.
The problem is, task_bp_pinned(cpu) checks "cpu == iter->cpu"
but this doesn't account the "all cpus" events with iter->cpu <
0.
This means that, say, register_user_hw_breakpoint(tsk) can
happily create the arbitrary number > HBP_NUM of breakpoints
which can not be activated. toggle_bp_task_slot() is equally
wrong by the same reason and nr_task_bp_pinned[] can have
negative entries.
Simple test:
# perl -e 'sleep 1 while 1' &
# perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10,mem:0x10 -p `pidof perl`
Before this patch this triggers the same problem/WARN_ON(),
after the patch it correctly fails with -ENOSPC.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20130620155006.GA6324@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince's fuzzer once again found holes. This time it spotted a leak in
the locked page accounting.
When an event had redirected output and its close() was the last
reference to the buffer we didn't have a vm context to undo accounting.
Change the code to destroy the buffer on the last munmap() and detach
all redirected events at that time. This provides us the right context
to undo the vm accounting.
Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.net
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince reported a problem found by his perf specific trinity
fuzzer.
Al noticed 2 problems with perf's mmap():
- it has issues against fork() since we use vma->vm_mm for accounting.
- it has an rb refcount leak on double mmap().
We fix the issues against fork() by using VM_DONTCOPY; I don't
think there's code out there that uses this; we didn't hear
about weird accounting problems/crashes. If we do need this to
work, the previously proposed VM_PINNED could make this work.
Aside from the rb reference leak spotted by Al, Vince's example
prog was indeed doing a double mmap() through the use of
perf_event_set_output().
This exposes another problem, since we now have 2 events with
one buffer, the accounting gets screwy because we account per
event. Fix this by making the buffer responsible for its own
accounting.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20130528085548.GA12193@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add perf_event_aux() function to send out all types of
auxiliary events - mmap, task, comm events. For each type
there's match and output functions defined and used as
callbacks during perf_event_aux processing.
This way we can centralize the pmu/context iterating and
event matching logic. Also since lot of the code was
duplicated, this patch reduces the .text size about 2kB
on my setup:
snipped output from 'objdump -x kernel/events/core.o'
before:
Idx Name Size
0 .text 0000d313
after:
Idx Name Size
0 .text 0000cad3
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1367857638-27631-3-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The perf_event_task_ctx() function needs to be called with
preemption disabled, since it's checking for currently
scheduled cpu against event cpu.
We disable preemption for task related perf event context
if there's one defined, leaving up to the chance which cpu
it gets scheduled in.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1367857638-27631-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull 'full dynticks' support from Ingo Molnar:
"This tree from Frederic Weisbecker adds a new, (exciting! :-) core
kernel feature to the timer and scheduler subsystems: 'full dynticks',
or CONFIG_NO_HZ_FULL=y.
This feature extends the nohz variable-size timer tick feature from
idle to busy CPUs (running at most one task) as well, potentially
reducing the number of timer interrupts significantly.
This feature got motivated by real-time folks and the -rt tree, but
the general utility and motivation of full-dynticks runs wider than
that:
- HPC workloads get faster: CPUs running a single task should be able
to utilize a maximum amount of CPU power. A periodic timer tick at
HZ=1000 can cause a constant overhead of up to 1.0%. This feature
removes that overhead - and speeds up the system by 0.5%-1.0% on
typical distro configs even on modern systems.
- Real-time workload latency reduction: CPUs running critical tasks
should experience as little jitter as possible. The last remaining
source of kernel-related jitter was the periodic timer tick.
- A single task executing on a CPU is a pretty common situation,
especially with an increasing number of cores/CPUs, so this feature
helps desktop and mobile workloads as well.
The cost of the feature is mainly related to increased timer
reprogramming overhead when a CPU switches its tick period, and thus
slightly longer to-idle and from-idle latency.
Configuration-wise a third mode of operation is added to the existing
two NOHZ kconfig modes:
- CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
as a config option. This is the traditional Linux periodic tick
design: there's a HZ tick going on all the time, regardless of
whether a CPU is idle or not.
- CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
periodic tick when a CPU enters idle mode.
- CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
tick when a CPU is idle, also slows the tick down to 1 Hz (one
timer interrupt per second) when only a single task is running on a
CPU.
The .config behavior is compatible: existing !CONFIG_NO_HZ and
CONFIG_NO_HZ=y settings get translated to the new values, without the
user having to configure anything. CONFIG_NO_HZ_FULL is turned off by
default.
This feature is based on a lot of infrastructure work that has been
steadily going upstream in the last 2-3 cycles: related RCU support
and non-periodic cputime support in particular is upstream already.
This tree adds the final pieces and activates the feature. The pull
request is marked RFC because:
- it's marked 64-bit only at the moment - the 32-bit support patch is
small but did not get ready in time.
- it has a number of fresh commits that came in after the merge
window. The overwhelming majority of commits are from before the
merge window, but still some aspects of the tree are fresh and so I
marked it RFC.
- it's a pretty wide-reaching feature with lots of effects - and
while the components have been in testing for some time, the full
combination is still not very widely used. That it's default-off
should reduce its regression abilities and obviously there are no
known regressions with CONFIG_NO_HZ_FULL=y enabled either.
- the feature is not completely idempotent: there is no 100%
equivalent replacement for a periodic scheduler/timer tick. In
particular there's ongoing work to map out and reduce its effects
on scheduler load-balancing and statistics. This should not impact
correctness though, there are no known regressions related to this
feature at this point.
- it's a pretty ambitious feature that with time will likely be
enabled by most Linux distros, and we'd like you to make input on
its design/implementation, if you dislike some aspect we missed.
Without flaming us to crisp! :-)
Future plans:
- there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
the periodic tick altogether when there's a single busy task on a
CPU. We'd first like 1 Hz to be exposed more widely before we go
for the 0 Hz target though.
- once we reach 0 Hz we can remove the periodic tick assumption from
nr_running>=2 as well, by essentially interrupting busy tasks only
as frequently as the sched_latency constraints require us to do -
once every 4-40 msecs, depending on nr_running.
I am personally leaning towards biting the bullet and doing this in
v3.10, like the -rt tree this effort has been going on for too long -
but the final word is up to you as usual.
More technical details can be found in Documentation/timers/NO_HZ.txt"
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
sched: Keep at least 1 tick per second for active dynticks tasks
rcu: Fix full dynticks' dependency on wide RCU nocb mode
nohz: Protect smp_processor_id() in tick_nohz_task_switch()
nohz_full: Add documentation.
cputime_nsecs: use math64.h for nsec resolution conversion helpers
nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
nohz: Reduce overhead under high-freq idling patterns
nohz: Remove full dynticks' superfluous dependency on RCU tree
nohz: Fix unavailable tick_stop tracepoint in dynticks idle
nohz: Add basic tracing
nohz: Select wide RCU nocb for full dynticks
nohz: Disable the tick when irq resume in full dynticks CPU
nohz: Re-evaluate the tick for the new task after a context switch
nohz: Prepare to stop the tick on irq exit
nohz: Implement full dynticks kick
nohz: Re-evaluate the tick from the scheduler IPI
sched: New helper to prevent from stopping the tick in full dynticks
sched: Kick full dynticks CPU that have more than one task enqueued.
perf: New helper to prevent full dynticks CPUs from stopping tick
perf: Kick full dynticks CPU if events rotation is needed
...
Pull perf fixes from Ingo Molnar:
"Misc fixes plus a small hw-enablement patch for Intel IB model 58
uncore events"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL
perf/x86/intel/lbr: Fix LBR filter
perf/x86: Blacklist all MEM_*_RETIRED events for Ivy Bridge
perf: Fix vmalloc ring buffer pages handling
perf/x86/intel: Fix unintended variable name reuse
perf/x86/intel: Add support for IvyBridge model 58 Uncore
perf/x86/intel: Fix typo in perf_event_intel_uncore.c
x86: Eliminate irq_mis_count counted in arch_irq_stat
The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.
Merge a common upstream merge point that has these
updates.
Conflicts:
include/linux/perf_event.h
kernel/rcutree.h
kernel/rcutree_plugin.h
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
If we allocate perf ring buffer with the size of single (user)
page, we will get memory corruption when releasing itin
rb_free_work function (for CONFIG_PERF_USE_VMALLOC option).
For single page sized ring buffer the page_order is -1 (because
nr_pages is 0). This needs to be recognized in the rb_free_work
function to release proper amount of pages.
Adding data_page_nr function that returns number of allocated
data pages. Customizing the rest of the code to use it.
Reported-by: Jan Stancek <jstancek@redhat.com>
Original-patch-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20130319143509.GA1128@krava.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf updates from Ingo Molnar:
"Features:
- Add "uretprobes" - an optimization to uprobes, like kretprobes are
an optimization to kprobes. "perf probe -x file sym%return" now
works like kretprobes. By Oleg Nesterov.
- Introduce per core aggregation in 'perf stat', from Stephane
Eranian.
- Add memory profiling via PEBS, from Stephane Eranian.
- Event group view for 'annotate' in --stdio, --tui and --gtk, from
Namhyung Kim.
- Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.
- Add Ivy Bridge-EP uncore support, by Zheng Yan
- IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.
- Add perf test entries for checking breakpoint overflow signal
handler issues, from Jiri Olsa.
- Add perf test entry for for checking number of EXIT events, from
Namhyung Kim.
- Add perf test entries for checking --cpu in record and stat, from
Jiri Olsa.
- Introduce perf stat --repeat forever, from Frederik Deweerdt.
- Add --no-demangle to report/top, from Namhyung Kim.
- PowerPC fixes plus a couple of cleanups/optimizations in uprobes
and trace_uprobes, by Oleg Nesterov.
Various fixes and refactorings:
- Fix dependency of the python binding wrt libtraceevent, from
Naohiro Aota.
- Simplify some perf_evlist methods and to allow 'stat' to share code
with 'record' and 'trace', by Arnaldo Carvalho de Melo.
- Remove dead code in related to libtraceevent integration, from
Namhyung Kim.
- Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
sched lat' back working, by Arnaldo Carvalho de Melo
- We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
de Melo.
- Kill a bunch of die() calls, from Namhyung Kim.
- Fix build on non-glibc systems due to libio.h absence, from Cody P
Schafer.
- Remove some perf_session and tracing dead code, from David Ahern.
- Honor parallel jobs, fix from Borislav Petkov
- Introduce tools/lib/lk library, initially just removing duplication
among tools/perf and tools/vm. from Borislav Petkov
... and many more I missed to list, see the shortlog and git log for
more details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
perf/x86/intel/P4: Robistify P4 PMU types
perf/x86/amd: Fix AMD NB and L2I "uncore" support
perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
perf/x86: Check all MSRs before passing hw check
perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
perf/x86/intel: Add Ivy Bridge-EP uncore support
perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
uprobes/tracing: Change create_trace_uprobe() to support uretprobes
uprobes/tracing: Make seq_printf() code uretprobe-friendly
uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
uprobes/tracing: Generalize struct uprobe_trace_entry_head
uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
uprobes/tracing: Kill the pointless seq_print_ip_sym() call
uprobes/tracing: Kill the pointless task_pt_regs() calls
...
Pull cgroup updates from Tejun Heo:
- Fixes and a lot of cleanups. Locking cleanup is finally complete.
cgroup_mutex is no longer exposed to individual controlelrs which
used to cause nasty deadlock issues. Li fixed and cleaned up quite a
bit including long standing ones like racy cgroup_path().
- device cgroup now supports proper hierarchy thanks to Aristeu.
- perf_event cgroup now supports proper hierarchy.
- A new mount option "__DEVEL__sane_behavior" is added. As indicated
by the name, this option is to be used for development only at this
point and generates a warning message when used. Unfortunately,
cgroup interface currently has too many brekages and inconsistencies
to implement a consistent and unified hierarchy on top. The new flag
is used to collect the behavior changes which are necessary to
implement consistent unified hierarchy. It's likely that this flag
won't be used verbatim when it becomes ready but will be enabled
implicitly along with unified hierarchy.
The option currently disables some of broken behaviors in cgroup core
and also .use_hierarchy switch in memcg (will be routed through -mm),
which can be used to make very unusual hierarchy where nesting is
partially honored. It will also be used to implement hierarchy
support for blk-throttle which would be impossible otherwise without
introducing a full separate set of control knobs.
This is essentially versioning of interface which isn't very nice but
at this point I can't see any other options which would allow keeping
the interface the same while moving towards hierarchy behavior which
is at least somewhat sane. The planned unified hierarchy is likely
to require some level of adaptation from userland anyway, so I think
it'd be best to take the chance and update the interface such that
it's supportable in the long term.
Maintaining the existing interface does complicate cgroup core but
shouldn't put too much strain on individual controllers and I think
it'd be manageable for the foreseeable future. Maybe we'll be able
to drop it in a decade.
Fix up conflicts (including a semantic one adding a new #include to ppc
that was uncovered by header the file changes) as per Tejun.
* 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (45 commits)
cpuset: fix compile warning when CONFIG_SMP=n
cpuset: fix cpu hotplug vs rebuild_sched_domains() race
cpuset: use rebuild_sched_domains() in cpuset_hotplug_workfn()
cgroup: restore the call to eventfd->poll()
cgroup: fix use-after-free when umounting cgroupfs
cgroup: fix broken file xattrs
devcg: remove parent_cgroup.
memcg: force use_hierarchy if sane_behavior
cgroup: remove cgrp->top_cgroup
cgroup: introduce sane_behavior mount option
move cgroupfs_root to include/linux/cgroup.h
cgroup: convert cgroupfs_root flag bits to masks and add CGRP_ prefix
cgroup: make cgroup_path() not print double slashes
Revert "cgroup: remove bind() method from cgroup_subsys."
perf: make perf_event cgroup hierarchical
cgroup: implement cgroup_is_descendant()
cgroup: make sure parent won't be destroyed before its children
cgroup: remove bind() method from cgroup_subsys.
devcg: remove broken_hierarchy tag
cgroup: remove cgroup_lock_is_held()
...
Provide a new helper that help full dynticks CPUs to prevent
from stopping their tick in case there are events in the local
rotation list.
This way we make sure that perf_event_task_tick() is serviced
on demand.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Kick the current CPU's tick by sending it a self IPI when
an event is queued on the rotation list and it is the first
element inserted. This makes sure that perf_event_task_tick()
works on full dynticks CPUs.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Conflicts:
arch/x86/kernel/cpu/perf_event_intel.c
Merge in the latest fixes before applying new patches, resolve the conflict.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Trinity discovered that we fail to check all 64 bits of
attr.config passed by user space, resulting to out-of-bounds
access of the perf_swevent_enabled array in
sw_perf_event_destroy().
Introduced in commit b0a873ebb ("perf: Register PMU
implementations").
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1365882554-30259-1-git-send-email-tt.rantala@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Unlike the kretprobes we can't trust userspace, thus must have
protection from user space attacks. User-space have "unlimited"
stack, and this patch limits the return probes nestedness as a
simple remedy for it.
Note that this implementation leaks return_instance on siglongjmp
until exit()/exec().
The intention is to have KISS and bare minimum solution for the
initial implementation in order to not complicate the uretprobes
code.
In the future we may come up with more sophisticated solution that
remove this depth limitation. It is not easy task and lays beyond
this patchset.
Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Uretprobe handlers are invoked when the trampoline is hit, on completion
the trampoline is replaced with the saved return address and the uretprobe
instance deleted.
TODO: handle_trampoline() assumes that ->return_instances is always valid.
We should teach it to handle longjmp() which can invalidate the pending
return_instance's. This is nontrivial, we will try to do this in a separate
series.
Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
When a uprobe with return probe consumer is hit, prepare_uretprobe()
function is invoked. It creates return_instance, hijacks return address
and replaces it with the trampoline.
* Return instances are kept as stack per uprobed task.
* Return instance is chained, when the original return address is
trampoline's page vaddr (e.g. recursive call of the probed function).
Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Allocate trampoline page, as the very first one in uprobed
task xol area, and fill it with breakpoint opcode.
Also introduce get_trampoline_vaddr() helper, to wrap the
trampoline address extraction from area->vaddr. That removes
confusion and eases the debug experience in case ->vaddr
notion will be changed.
Signed-off-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
perf_event is one of a couple remaining cgroup controllers with broken
hierarchy support. Converting it to support hierarchy is almost
trivial. The only thing necessary is to consider a task belonging to
a descendant cgroup as a match. IOW, if the cgroup of the currently
executing task (@cpuctx->cgrp) equals or is a descendant of the
event's cgroup (@event->cgrp), then the event should be enabled.
Implement hierarchy support and remove .broken_hierarchy tag along
with the incorrect comment on what needs to be done for hierarchy
support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephane Eranian <eranian@google.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
For NUL terminated string, always make sure that there's '\0' at the end.
In our case we need a return value, so still use strncpy() and
fix up the tail explicitly.
(strlcpy() returns the size, not the pointer)
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: a.p.zijlstra@chello.nl <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org <paulus@samba.org>
Cc: acme@ghostprotocols.net <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/51623E0B.7070101@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change write_opcode() to use copy_highpage() + copy_to_page()
and simplify the code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Extract the kmap_atomic/memcpy/kunmap_atomic code from
xol_get_insn_slot() into the new simple helper, copy_to_page().
It will have more users soon.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
__copy_insn(filp) can only be called after valid_vma() returns T,
vma->vm_file passed as "filp" can not be NULL.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Change __copy_insn() to use copy_from_page() and simplify the code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
No functional changes. Rename copy_opcode() into copy_from_page() and
add the new "int len" argument to make it more more generic for the
new users.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Some architectures like powerpc have multiple variants of the trap
instruction. Introduce an additional helper is_trap_insn() for run-time
handling of non-uprobe traps on such architectures.
While there, change is_swbp_at_addr() to is_trap_at_addr() for reading
clarity.
With this change, the uprobe registration path will supercede any trap
instruction inserted at the requested location, while taking care of
delivering the SIGTRAP for cases where the trap notification came in
for an address without a uprobe. See [1] for a more detailed explanation.
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-March/104771.html
This change was suggested by Oleg Nesterov.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cleanup. Now that we have f_inode/file_inode() we can use it instead
of vm_file->f_mapping->host.
This should not make any difference for uprobes, but in theory this
change is more correct. We use this inode as a key, to compare it
with uprobe->inode set by uprobe_register(inode), and the caller uses
d_inode.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Type of mapping was lost and made it hard for a tool
to distinguish code vs. data mmaps. Perf has the ability
to distinguish the two.
Use a bit in the header->misc bitmask to keep track of
the mmap type. If PERF_RECORD_MISC_MMAP_DATA is set then
the mapping is not executable (!VM_EXEC). If not set, then
the mapping is executable.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: namhyung.kim@lge.com
Link: http://lkml.kernel.org/r/1359040242-8269-16-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds PERF_SAMPLE_DATA_SRC.
PERF_SAMPLE_DATA_SRC collects the data source, i.e., where
did the data associated with the sampled instruction
come from. Information is stored in a perf_mem_data_src
structure. It contains opcode, mem level, tlb, snoop,
lock information, subject to availability in hardware.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: namhyung.kim@lge.com
Link: http://lkml.kernel.org/r/1359040242-8269-8-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some events it's useful to weight sample with a hardware
provided number. This expresses how expensive the action the
sample represent was. This allows the profiler to scale
the samples to be more informative to the programmer.
There is already the period which is used similarly, but it
means something different, so I chose to not overload it.
Instead a new sample type for WEIGHT is added.
Can be used for multiple things. Initially it is used for TSX
abort costs and profiling by memory latencies (so to make
expensive load appear higher up in the histograms). The concept
is quite generic and can be extended to many other kinds of
events or architectures, as long as the hardware provides
suitable auxillary values. In principle it could be also used
for software tracepoints.
This adds the generic glue. A new optional sample format for a
64-bit weight value.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: namhyung.kim@lge.com
Link: http://lkml.kernel.org/r/1359040242-8269-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a flaw in perf_output_space(). In case the size
of the space needed is bigger than the actual buffer size, there
may be situations where the function would return true (i.e.,
there is space) when it should not. head > offset due to
rounding of the masking logic.
The problem can be tested by activating BTS on Intel processors.
A BTS record can be as big as 16 pages. The following command
fails:
$ perf record -m 4 -c 1 -e branches:u my_test_program
You will get a buffer corruption with this. Perf report won't be
able to parse the perf.data.
The fix is to first check that the requested space is smaller
than the buffer size. If so, then the masking logic will work
fine. If not, then there is no chance the record can be saved
and it will be gracefully handled by upper code layers.
[ In v2, we also make the logic for the writable more explicit by
renaming it to rb->overwrite because it tells whether or not the
buffer can overwrite its tail (suggested by PeterZ). ]
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: peterz@infradead.org
Cc: jolsa@redhat.com
Cc: fweisbec@gmail.com
Link: http://lkml.kernel.org/r/20130318133327.GA3056@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge in all pending fixes, before pulling the latest development
bits from Arnaldo - which will involve merge conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It's a per-cpu data structure but missed the __percpu annotation.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1363600594-11453-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_event_task_event() iterates pmu list and generate events
for each eligible pmu context. But if task_event has task_ctx
like in EXIT it'll generate events even though the pmu doesn't
have an eligible one. Fix it by moving the code to proper
places.
Before this patch:
$ perf record -n true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.006 MB perf.data (~248 samples) ]
$ perf report -D | tail
Aggregated stats:
TOTAL events: 73
MMAP events: 67
COMM events: 2
EXIT events: 4
cycles stats:
TOTAL events: 73
MMAP events: 67
COMM events: 2
EXIT events: 4
After this patch:
$ perf report -D | tail
Aggregated stats:
TOTAL events: 70
MMAP events: 67
COMM events: 2
EXIT events: 1
cycles stats:
TOTAL events: 70
MMAP events: 67
COMM events: 2
EXIT events: 1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363332433-7637-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When cpu/task clock events are initialized, their sampling
frequencies are converted to have a fixed value. However it
missed to update the hwc->last_period which was set to 1 for
initial sampling frequency calibration.
Because this hwc->last_period value is used as a period in
perf_swevent_ hrtime(), every recorded sample will have an
incorrected period of 1.
$ perf record -e task-clock noploop 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.158 MB perf.data (~6919 samples) ]
$ perf report -n --show-total-period --stdio
# Samples: 4K of event 'task-clock'
# Event count (approx.): 4000
#
# Overhead Samples Period Command Shared Object Symbol
# ........ ............ ............ ....... ............. ..................
#
99.95% 3998 3998 noploop noploop [.] main
0.03% 1 1 noploop libc-2.15.so [.] init_cacheinfo
0.03% 1 1 noploop ld-2.15.so [.] open_verify
Note that it doesn't affect the non-sampling event so that the
perf stat still gets correct value with or without this patch.
$ perf stat -e task-clock noploop 1
Performance counter stats for 'noploop 1':
1000.272525 task-clock # 1.000 CPUs utilized
1.000560605 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363574507-18808-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move struct perf_cgroup_info and perf_cgroup to
kernel/perf/core.c, and then we can remove include of cgroup.h.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/513568A0.6020804@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert to the much saner new idr interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
Pull perf changes from Ingo Molnar:
"There are lots of improvements, the biggest changes are:
Main kernel side changes:
- Improve uprobes performance by adding 'pre-filtering' support, by
Oleg Nesterov.
- Make some POWER7 events available in sysfs, equivalent to what was
done on x86, from Sukadev Bhattiprolu.
- tracing updates by Steve Rostedt - mostly misc fixes and smaller
improvements.
- Use perf/event tracing to report PCI Express advanced errors, by
Tony Luck.
- Enable northbridge performance counters on AMD family 15h, by Jacob
Shin.
- This tracing commit:
tracing: Remove the extra 4 bytes of padding in events
changes the ABI. All involved parties (PowerTop in particular)
seem to agree that it's safe to do now with the introduction of
libtraceevent, but the devil is in the details ...
Main tooling side changes:
- Add 'event group view', from Namyung Kim:
To use it, 'perf record' should group events when recording. And
then perf report parses the saved group relation from file header
and prints them together if --group option is provided. You can
use the 'perf evlist' command to see event group information:
$ perf record -e '{ref-cycles,cycles}' noploop 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]
$ perf evlist --group
{ref-cycles,cycles}
With this example, default perf report will show you each event
separately.
You can use --group option to enable event group view:
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.): 6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
As you can see the Overhead column now contains both of ref-cycles
and cycles and header line shows group information also - 'anon
group { ref-cycles, cycles }'. The output is sorted by period of
group leader first.
- Initial GTK+ annotate browser, from Namhyung Kim.
- Add option for runtime switching perf data file in perf report,
just press 's' and a menu with the valid files found in the current
directory will be presented, from Feng Tang.
- Add support to display whole group data for raw columns, from Jiri
Olsa.
- Add per processor socket count aggregation in perf stat, from
Stephane Eranian.
- Add interval printing in 'perf stat', from Stephane Eranian.
- 'perf test' improvements
- Add support for wildcards in tracepoint system name, from Jiri
Olsa.
- Add anonymous huge page recognition, from Joshua Zhu.
- perf build-id cache now can show DSOs present in a perf.data file
that are not in the cache, to integrate with build-id servers being
put in place by organizations such as Fedora.
- perf top now shares more of the evsel config/creation routines with
'record', paving the way for further integration like 'top'
snapshots, etc.
- perf top now supports DWARF callchains.
- Fix mmap limitations on 32-bit, fix from David Miller.
- 'perf bench numa mem' NUMA performance measurement suite
- ... and lots of fixes, performance improvements, cleanups and other
improvements I failed to list - see the shortlog and git log for
details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
perf/x86/amd: Enable northbridge performance counters on AMD family 15h
perf/hwbp: Fix cleanup in case of kzalloc failure
perf tools: Fix build with bison 2.3 and older.
perf tools: Limit unwind support to x86 archs
perf annotate: Make it to be able to skip unannotatable symbols
perf gtk/annotate: Fail early if it can't annotate
perf gtk/annotate: Show source lines with gray color
perf gtk/annotate: Support multiple event annotation
perf ui/gtk: Implement basic GTK2 annotation browser
perf annotate: Fix warning message on a missing vmlinux
perf buildid-cache: Add --update option
uprobes/perf: Avoid uprobe_apply() whenever possible
uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
uprobes/perf: Teach trace_uprobe/perf code to pre-filter
uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
uprobes: Introduce uprobe_apply()
perf: Introduce hw_perf_event->tp_target and ->tp_list
uprobes/perf: Always increment trace_uprobe->nhit
uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
uprobes/tracing: Introduce is_trace_uprobe_enabled()
...
Obviously this is a typo and could result in memory leaks if kzalloc
fails on a given cpu.
Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360186160-7566-1-git-send-email-dbaluta@ixiacom.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently it is not possible to change the filtering constraints after
uprobe_register(), so a consumer can not, say, start to trace a task/mm
which was previously filtered out, or remove the no longer needed bp's.
Introduce uprobe_apply() which simply does register_for_each_vma() again
to consult uprobe_consumer->filter() and install/remove the breakpoints.
The only complication is that register_for_each_vma() can no longer
assume that uprobe->consumers should be consulter if is_register == T,
so we change it to accept "struct uprobe_consumer *new" instead.
Unlike uprobe_register(), uprobe_apply(true) doesn't do "unregister" if
register_for_each_vma() fails, it is up to caller to handle the error.
Note: we probably need to cleanup the current interface, it is strange
that uprobe_apply/unregister need inode/offset. We should either change
uprobe_register() to return "struct uprobe *", or add a private ->uprobe
member in uprobe_consumer. And in the long term uprobe_apply() should
take a single argument, uprobe or consumer, even "bool add" should go
away.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
sys_perf_event_open()->perf_init_event(event) is called before
find_get_context(event), this means that event->ctx == NULL when
class->reg(TRACE_REG_PERF_REGISTER/OPEN) is called and thus it
can't know if this event is per-task or system-wide.
This patch adds hw_perf_event->tp_target for PERF_TYPE_TRACEPOINT,
this is analogous to PERF_TYPE_BREAKPOINT/bp_target we already have.
The patch also moves ->bp_target up so that it can overlap with the
new member, this can help the compiler to generate the better code.
trace_uprobe_register() will use it for prefiltering to avoid the
unnecessary breakpoints in mm's we do not want to trace.
->tp_target doesn't have its own reference, but we can rely on the
fact that either sys_perf_event_open() holds a reference, or it is
equal to event->ctx->task. So this pointer is always valid until
free_event().
Also add the "struct list_head tp_list" into this union. It is not
strictly necessary, but it can simplify the next changes and we can
add it for free.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
The original pull message for uprobes (commit 654443e2) noted:
This tree includes uprobes support in 'perf probe' - but SystemTap
(and other tools) can take advantage of user probe points as well.
In order to actually be usable in module-based tools like SystemTap, the
interface needs to be exported. This patch first adds the obvious
exports for uprobe_register and uprobe_unregister. Then it also adds
one for task_user_regset_view, which is necessary to get the correct
state of userspace registers.
Signed-off-by: Josh Stone <jistone@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
utask->xol_vaddr is either zero or valid, remove the bogus
IS_ERR_VALUE() check in xol_free_insn_slot().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
handle_swbp() does get_utask() before can_skip_sstep() for no reason,
we do not need ->utask if can_skip_sstep() succeeds.
Move get_utask() to pre_ssout() who actually starts to use it. Move
the initialization of utask->active_uprobe/state as well. This way
the whole initialization is consolidated in pre_ssout().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
pre_ssout() should do xol_free_insn_slot() if arch_uprobe_pre_xol()
fails, otherwise nobody will free the allocated slot.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
pre_ssout()->xol_get_insn_slot() path is confusing and buggy. This patch
cleanups the code, the next one fixes the bug.
Change xol_get_insn_slot() to only allocate the slot and do nothing more,
move the initialization of utask->xol_vaddr/vaddr into pre_ssout().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Rename add_utask() into get_utask() and change it to allocate on
demand to simplify the caller. Like get_xol_area() it will have
more users.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Currently only xol_get_insn_slot() does get_xol_area() + xol_alloc_area(),
but this will have more users and we do not want to copy-and-paste this
code. This patch simply moves xol_alloc_area() into get_xol_area() to
simplify the current and future code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Move alloc_page() from xol_add_vma() to xol_alloc_area() to cleanup
the code. This separates the memory allocations and consolidates the
-EALREADY cleanups and the error handling.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Change handle_swbp() to set regs->ip = bp_vaddr in advance, this is
what consumer->handler() needs but uprobe_get_swbp_addr() is not
exported.
This also simplifies the code and makes it more consistent across
the supported architectures. handle_swbp() becomes the only caller
of uprobe_get_swbp_addr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Currrently the are 2 problems with pre-filtering:
1. It is not possible to add/remove a task (mm) after uprobe_register()
2. A forked child inherits all breakpoints and uprobe_consumer can not
control this.
This patch does the first step to improve the filtering. handler_chain()
removes the breakpoints installed by this uprobe from current->mm if all
handlers return UPROBE_HANDLER_REMOVE.
Note that handler_chain() relies on ->register_rwsem to avoid the race
with uprobe_register/unregister which can add/del a consumer, or even
remove and then insert the new uprobe at the same address.
Perhaps we will add uprobe_apply_mm(uprobe, mm, is_register) and teach
copy_mm() to do filter(UPROBE_FILTER_FORK), but I think this change makes
sense anyway.
Note: instead of checking the retcode from uc->handler, we could add
uc->filter(UPROBE_FILTER_BPHIT). But I think this is not optimal to
call 2 hooks in a row. This buys nothing, and if handler/filter do
something nontrivial they will probably do the same work twice.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Finally add uprobe_consumer->filter() and change consumer_filter()
to actually call this method.
Note that ->filter() accepts mm_struct, not task_struct. Because:
1. We do not have for_each_mm_user(mm, task).
2. Even if we implement for_each_mm_user(), ->filter() can
use it itself.
3. It is not clear who will actually need this interface to
do the "nontrivial" filtering.
Another argument is "enum uprobe_filter_ctx", consumer->filter() can
use it to figure out why/where it was called. For example, perhaps
we can add UPROBE_FILTER_PRE_REGISTER used by build_map_info() to
quickly "nack" the unwanted mm's. In this case consumer should know
that it is called under ->i_mmap_mutex.
See the previous discussion at http://marc.info/?t=135214229700002
Perhaps we should pass more arguments, vma/vaddr?
Note: this patch obviously can't help to filter out the child created
by fork(), this will be addressed later.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
filter_chain() was added into install_breakpoint/remove_breakpoint to
simplify the initial changes but this is sub-optimal.
This patch shifts the callsite to the callers, register_for_each_vma()
and uprobe_mmap(). This way:
- It will be easier to add the new arguments. This is the main reason,
we can do more optimizations later.
- register_for_each_vma(is_register => true) can be optimized, we only
need to consult the new consumer. The previous consumers were already
asked when they called uprobe_register().
This patch also moves the MMF_HAS_UPROBES check from remove_breakpoint(),
this allows to avoid the potentionally costly filter_chain(). Note that
register_for_each_vma(is_register => false) doesn't really need to take
->consumer_rwsem, but I don't think it makes sense to optimize this and
introduce filter_chain_lockless().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobe_register() and uprobe_unregister() are the only users of
mutex_lock(uprobes_hash(inode)), and the only reason why we can't
simply remove it is that we need to ensure that delete_uprobe() is
not possible after alloc_uprobe() and before consumer_add().
IOW, we need to ensure that when we take uprobe->register_rwsem
this uprobe is still valid and we didn't race with _unregister()
which called delete_uprobe() in between.
With this patch uprobe_register() simply checks uprobe_is_active()
and retries if it hits this very unlikely race. uprobes_mutex[] is
no longer needed and can be removed.
There is another reason for this change, prepare_uprobe() should be
folded into alloc_uprobe() and we do not want to hold the extra locks
around read_mapping_page/etc.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
The lifetime of uprobe->rb_node and uprobe->inode is not refcounted,
delete_uprobe() is called when we detect that uprobe has no consumers,
and it would be deadly wrong to do this twice.
Change delete_uprobe() to WARN() if it was already called. We use
RB_CLEAR_NODE() to mark uprobe "inactive", then RB_EMPTY_NODE() can
be used to detect this case.
RB_EMPTY_NODE() is not used directly, we add the trivial helper for
the next change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobe_events counts the number of uprobes in uprobes_tree but
it is used as a boolean. We can use RB_EMPTY_ROOT() instead.
Probably no_uprobe_events() added by this patch can have more
callers, say, mmf_recalc_uprobes().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Now that ->register_rwsem is safe under ->mmap_sem we can kill
->copy_mutex and abuse down_write(&uprobe->consumer_rwsem).
This makes prepare_uprobe() even more ugly, but we should kill
it anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Simply remove UPROBE_RUN_HANDLER and the corresponding code.
It can only help if uprobe has a single consumer, and in fact
it is no longer needed after handler_chain() was changed to use
->register_rwsem, we simply can not race with uprobe_register().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Now that it safe to use ->consumer_rwsem under ->mmap_sem we can
almost finish the implementation of filter_chain(). It still lacks
the actual uc->filter(...) call but othewrwise it is ready, just
it pretends that ->filter() always returns true.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Introduce uprobe->register_rwsem. It is taken for writing around
__uprobe_register/unregister.
Change handler_chain() to use this sem rather than consumer_rwsem.
The main reason for this change is that we have the nasty problem
with mmap_sem/consumer_rwsem dependency. filter_chain() needs to
protect uprobe->consumers like handler_chain(), but they can not
use the same lock. filter_chain() can be called under ->mmap_sem
(currently this is always true), but we want to allow ->handler()
to play with the probed task's memory, and this needs ->mmap_sem.
Alternatively we could use srcu, but synchronize_srcu() is very
slow and ->register_rwsem allows us to do more. In particular, we
can teach handler_chain() to do remove_breakpoint() if this bp is
"nacked" by all consumers, we know that we can't race with the
new consumer which does uprobe_register().
See also the next patches. uprobes_mutex[] is almost ready to die.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
To support the filtering uprobe_register() should do
register_for_each_vma(true) every time the new consumer comes,
we need to install the previously nacked breakpoints.
Note:
- uprobes_mutex[] should die, what it actually protects is
alloc_uprobe().
- UPROBE_RUN_HANDLER should die too, obviously it can't work
unless uprobe has a single consumer. The consumer should
serialize with _register/_unregister itself. Or this flag
should live in uprobe_consumer->state.
- Perhaps we can do some optimizations later. For example, if
filter_chain() never returns false uprobe can record this
fact and avoid the unnecessary register_for_each_vma().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobe_unregister() removes the breakpoints only if the last consumer
goes away. To support the filtering it should do this every time, we
want to remove the breakpoints which nobody else want to keep.
Note: given that filter_chain() is not actually implemented, this patch
itself doesn't change the behaviour yet, register_for_each_vma(false)
is a heavy "nop" unless there are no more consumers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Add the new helper filter_chain(). Currently it is only placeholder,
the comment explains what is should do. We will change it later to
consult every consumer to decide whether we need to install the swbp.
Until then it works as if any consumer returns true, this matches the
current behavior.
Change install_breakpoint() to call filter_chain() instead of checking
uprobe->consumers != NULL. We obviously need this, and this equally
closes the race with _unregister().
Change remove_breakpoint() to call this helper too. Currently this is
pointless because remove_breakpoint() is only called when the last
consumer goes away, but we will change this.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobe_consumer->filter() is pointless in its current form, kill it.
We will add it back, but with the different signature/semantics. Perhaps
we will even re-introduce the callsite in handler_chain(), but not to
just skip uc->handler().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
register/unregister verifies that inode/uc != NULL. For what?
This really looks like "hide the potential problem", the caller
should pass the valid data.
register() also checks uc->next == NULL, probably to prevent the
double-register but the caller can do other stupid/wrong things.
If we do this check, then we should document that uc->next should
be cleared before register() and add BUG_ON().
Also add the small comment about the i_size_read() check.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cosmetic. __set_bit(UPROBE_SKIP_SSTEP) is the part of initialization,
it is not clear why it is set in insert_uprobe().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
When we have group with mixed events (hw/sw) we want to end up
with group leader being in hw context. So if group leader is
initialy sw event, we move all the events under hw context.
The move is done for each event by removing it from its context
and adding it back into proper one. As a part of the removal the
event is automatically disabled, which is not what we want at
this stage of creating groups.
The fix is to initialize event state after removal from sw
context.
This fix resulted from the following discussion:
http://thread.gmane.org/gmane.linux.kernel.perf.user/1144
Reported-by: Andreas Hollmann <hollmann@in.tum.de>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/1359714225-4231-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We checked for uprobe==NULL earlier, no need to redo that.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1356030701-16284-22-git-send-email-sasha.levin@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull user namespace changes from Eric Biederman:
"While small this set of changes is very significant with respect to
containers in general and user namespaces in particular. The user
space interface is now complete.
This set of changes adds support for unprivileged users to create user
namespaces and as a user namespace root to create other namespaces.
The tyranny of supporting suid root preventing unprivileged users from
using cool new kernel features is broken.
This set of changes completes the work on setns, adding support for
the pid, user, mount namespaces.
This set of changes includes a bunch of basic pid namespace
cleanups/simplifications. Of particular significance is the rework of
the pid namespace cleanup so it no longer requires sending out
tendrils into all kinds of unexpected cleanup paths for operation. At
least one case of broken error handling is fixed by this cleanup.
The files under /proc/<pid>/ns/ have been converted from regular files
to magic symlinks which prevents incorrect caching by the VFS,
ensuring the files always refer to the namespace the process is
currently using and ensuring that the ptrace_mayaccess permission
checks are always applied.
The files under /proc/<pid>/ns/ have been given stable inode numbers
so it is now possible to see if different processes share the same
namespaces.
Through the David Miller's net tree are changes to relax many of the
permission checks in the networking stack to allowing the user
namespace root to usefully use the networking stack. Similar changes
for the mount namespace and the pid namespace are coming through my
tree.
Two small changes to add user namespace support were commited here adn
in David Miller's -net tree so that I could complete the work on the
/proc/<pid>/ns/ files in this tree.
Work remains to make it safe to build user namespaces and 9p, afs,
ceph, cifs, coda, gfs2, ncpfs, nfs, nfsd, ocfs2, and xfs so the
Kconfig guard remains in place preventing that user namespaces from
being built when any of those filesystems are enabled.
Future design work remains to allow root users outside of the initial
user namespace to mount more than just /proc and /sys."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (38 commits)
proc: Usable inode numbers for the namespace file descriptors.
proc: Fix the namespace inode permission checks.
proc: Generalize proc inode allocation
userns: Allow unprivilged mounts of proc and sysfs
userns: For /proc/self/{uid,gid}_map derive the lower userns from the struct file
procfs: Print task uids and gids in the userns that opened the proc file
userns: Implement unshare of the user namespace
userns: Implent proc namespace operations
userns: Kill task_user_ns
userns: Make create_new_namespaces take a user_ns parameter
userns: Allow unprivileged use of setns.
userns: Allow unprivileged users to create new namespaces
userns: Allow setting a userns mapping to your current uid.
userns: Allow chown and setgid preservation
userns: Allow unprivileged users to create user namespaces.
userns: Ignore suid and sgid on binaries if the uid or gid can not be mapped
userns: fix return value on mntns_install() failure
vfs: Allow unprivileged manipulation of the mount namespace.
vfs: Only support slave subtrees across different user namespaces
vfs: Add a user namespace reference from struct mnt_namespace
...
Pull cgroup changes from Tejun Heo:
"A lot of activities on cgroup side. The big changes are focused on
making cgroup hierarchy handling saner.
- cgroup_rmdir() had peculiar semantics - it allowed cgroup
destruction to be vetoed by individual controllers and tried to
drain refcnt synchronously. The vetoing never worked properly and
caused good deal of contortions in cgroup. memcg was the last
reamining user. Michal Hocko removed the usage and cgroup_rmdir()
path has been simplified significantly. This was done in a
separate branch so that the memcg people can base further memcg
changes on top.
- The above allowed cleaning up cgroup lifecycle management and
implementation of generic cgroup iterators which are used to
improve hierarchy support.
- cgroup_freezer updated to allow migration in and out of a frozen
cgroup and handle hierarchy. If a cgroup is frozen, all descendant
cgroups are frozen.
- netcls_cgroup and netprio_cgroup updated to handle hierarchy
properly.
- Various fixes and cleanups.
- Two merge commits. One to pull in memcg and rmdir cleanups (needed
to build iterators). The other pulled in cgroup/for-3.7-fixes for
device_cgroup fixes so that further device_cgroup patches can be
stacked on top."
Fixed up a trivial conflict in mm/memcontrol.c as per Tejun (due to
commit bea8c150a7 ("memcg: fix hotplugged memory zone oops") in master
touching code close to commit 2ef37d3fe4 ("memcg: Simplify
mem_cgroup_force_empty_list error handling") in for-3.8)
* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (65 commits)
cgroup: update Documentation/cgroups/00-INDEX
cgroup_rm_file: don't delete the uncreated files
cgroup: remove subsystem files when remounting cgroup
cgroup: use cgroup_addrm_files() in cgroup_clear_directory()
cgroup: warn about broken hierarchies only after css_online
cgroup: list_del_init() on removed events
cgroup: fix lockdep warning for event_control
cgroup: move list add after list head initilization
netprio_cgroup: allow nesting and inherit config on cgroup creation
netprio_cgroup: implement netprio[_set]_prio() helpers
netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx
netprio_cgroup: reimplement priomap expansion
netprio_cgroup: shorten variable names in extend_netdev_table()
netprio_cgroup: simplify write_priomap()
netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking
cgroup: remove obsolete guarantee from cgroup_task_migrate.
cgroup: add cgroup->id
cgroup, cpuset: remove cgroup_subsys->post_clone()
cgroup: s/CGRP_CLONE_CHILDREN/CGRP_CPUSET_CLONE_CHILDREN/
cgroup: rename ->create/post_create/pre_destroy/destroy() to ->css_alloc/online/offline/free()
...
Rename cgroup_subsys css lifetime related callbacks to better describe
what their roles are. Also, update documentation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
The expressions tsk->nsproxy->pid_ns and task_active_pid_ns
aka ns_of_pid(task_pid(tsk)) should have the same number of
cache line misses with the practical difference that
ns_of_pid(task_pid(tsk)) is released later in a processes life.
Furthermore by using task_active_pid_ns it becomes trivial
to write an unshare implementation for the the pid namespace.
So I have used task_active_pid_ns everywhere I can.
In fork since the pid has not yet been attached to the
process I use ns_of_pid, to achieve the same effect.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
This was always racy, but 268720903f
"uprobes: Rework register_for_each_vma() to make it O(n)" should be
blamed anyway, it made everything worse and I didn't notice.
register/unregister call build_map_info() and then do install/remove
breakpoint for every mm which mmaps inode/offset. This can obviously
race with fork()->dup_mmap() in between and we can miss the child.
uprobe_register() could be easily fixed but unregister is much worse,
the new mm inherits "int3" from parent and there is no way to detect
this if uprobe goes away.
So this patch simply adds percpu_down_read/up_read around dup_mmap(),
and percpu_down_write/up_write into register_for_each_vma().
This adds 2 new hooks into dup_mmap() but we can kill uprobe_dup_mmap()
and fold it into uprobe_end_dup_mmap().
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Flush the cache so that the instructions written to the XOL area are
visible.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
No functional changes.
powerpc is the only user of arch_uprobe_enable/disable_step() helpers,
but they should die. They can not be used correctly, every arch needs
its own implementation (like x86 does). And they do not really help
even as initial-and-almost-working code, arch_uprobe_*_xol() hooks can
easily use user_enable/disable_single_step() directly.
Change arch_uprobe_*_step() to do nothing, and convert powerpc to use
ptrace helpers. This is equally wrong, powerpc needs the arch-specific
fixes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
I've been trying to get hardware breakpoints with perf to work
on POWER7 but I'm getting the following:
% perf record -e mem:0x10000000 true
Error: sys_perf_event_open() syscall returned with 28 (No space left on device). /bin/dmesg may provide additional information.
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
true: Terminated
(FWIW adding -a and it works fine)
Debugging it seems that __reserve_bp_slot() is returning ENOSPC
because it thinks there are no free breakpoint slots on this
CPU.
I have a 2 CPUs, so perf userspace is doing two perf_event_open
syscalls to add a counter to each CPU [1]. The first syscall
succeeds but the second is failing.
On this second syscall, fetch_bp_busy_slots() sets slots.pinned
to be 1, despite there being no breakpoint on this CPU. This is
because the call the task_bp_pinned, checks all CPUs, rather
than just the current CPU. POWER7 only has one hardware
breakpoint per CPU (ie. HBP_NUM=1), so we return ENOSPC.
The following patch fixes this by checking the associated CPU
for each breakpoint in task_bp_pinned. I'm not familiar with
this code, so it's provided as a reference to the above issue.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Jovi Zhang <bookjovi@gmail.com>
Cc: K Prasad <prasad@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1351268936-2956-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf updates from Ingo Molnar:
"This tree includes some late late perf items that missed the first
round:
tools:
- Bash auto completion improvements, now we can auto complete the
tools long options, tracepoint event names, etc, from Namhyung Kim.
- Look up thread using tid instead of pid in 'perf sched'.
- Move global variables into a perf_kvm struct, from David Ahern.
- Hists refactorings, preparatory for improved 'diff' command, from
Jiri Olsa.
- Hists refactorings, preparatory for event group viewieng work, from
Namhyung Kim.
- Remove double negation on optional feature macro definitions, from
Namhyung Kim.
- Remove several cases of needless global variables, on most
builtins.
- misc fixes
kernel:
- sysfs support for IBS on AMD CPUs, from Robert Richter.
- Support for an upcoming Intel CPU, the Xeon-Phi / Knights Corner
HPC blade PMU, from Vince Weaver.
- misc fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
perf: Fix perf_cgroup_switch for sw-events
perf: Clarify perf_cpu_context::active_pmu usage by renaming it to ::unique_pmu
perf/AMD/IBS: Add sysfs support
perf hists: Add more helpers for hist entry stat
perf hists: Move he->stat.nr_events initialization to a template
perf hists: Introduce struct he_stat
perf diff: Removing the total_period argument from output code
perf tool: Add hpp interface to enable/disable hpp column
perf tools: Removing hists pair argument from output path
perf hists: Separate overhead and baseline columns
perf diff: Refactor diff displacement possition info
perf hists: Add struct hists pointer to struct hist_entry
perf tools: Complete tracepoint event names
perf/x86: Add support for Intel Xeon-Phi Knights Corner PMU
perf evlist: Remove some unused methods
perf evlist: Introduce add_newtp method
perf kvm: Move global variables into a perf_kvm struct
perf tools: Convert to BACKTRACE_SUPPORT
perf tools: Long option completion support for each subcommands
perf tools: Complete long option names of perf command
...
In order to allow sleeping during invalidate_page mmu notifier calls, we
need to avoid calling when holding the PT lock. In addition to its direct
calls, invalidate_page can also be called as a substitute for a change_pte
call, in case the notifier client hasn't implemented change_pte.
This patch drops the invalidate_page call from change_pte, and instead
wraps all calls to change_pte with invalidate_range_start and
invalidate_range_end calls.
Note that change_pte still cannot sleep after this patch, and that clients
implementing change_pte should not take action on it in case the number of
outstanding invalidate_range_start calls is larger than one, otherwise
they might miss a later invalidation.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Cc: Andrea Arcangeli <andrea@qumranet.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Liran Liss <liranl@mellanox.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement an interval tree as a replacement for the VMA prio_tree. The
algorithms are similar to lib/interval_tree.c; however that code can't be
directly reused as the interval endpoints are not explicitly stored in the
VMA. So instead, the common algorithm is moved into a template and the
details (node type, how to get interval endpoints from the node, etc) are
filled in using the C preprocessor.
Once the interval tree functions are available, using them as a
replacement to the VMA prio tree is a relatively simple, mechanical job.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA,
currently it lost original meaning but still has some effects:
| effect | alternative flags
-+------------------------+---------------------------------------------
1| account as reserved_vm | VM_IO
2| skip in core dump | VM_IO, VM_DONTDUMP
3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
This patch removes reserved_vm counter from mm_struct. Seems like nobody
cares about it, it does not exported into userspace directly, it only
reduces total_vm showed in proc.
Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP.
remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP.
remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP.
[akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Multiple threads can manipulate uprobe->flags, this is obviously
unsafe. For example mmap can set UPROBE_COPY_INSN while register
tries to set UPROBE_RUN_HANDLER, the latter can also race with
can_skip_sstep() which clears UPROBE_SKIP_SSTEP.
Change this code to use bitops.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
install_breakpoint() is called under mm->mmap_sem, this protects
set_swbp() but not prepare_uprobe(). Two or more different tasks
can call install_breakpoint()->prepare_uprobe() at the same time,
this leads to numerous problems if UPROBE_COPY_INSN is not set.
Just for example, the second copy_insn() can corrupt the already
analyzed/fixuped uprobe->arch.insn and race with handle_swbp().
This patch simply adds uprobe->copy_mutex to serialize this code.
We could probably reuse ->consumer_rwsem, but this would mean that
consumer->handler() can not use mm->mmap_sem, not good.
Note: this is another temporary ugly hack until we move this logic
into uprobe_register().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Preparation. Extract the copy_insn/arch_uprobe_analyze_insn code
from install_breakpoint() into the new helper, prepare_uprobe().
And move uprobe->flags defines from uprobes.h to uprobes.c, nobody
else can use them anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Strictly speaking this race was added by me in 56bb4cf6. However
I think that this bug is just another indication that we should
move copy_insn/uprobe_analyze_insn code from install_breakpoint()
to uprobe_register(), there are a lot of other reasons for that.
Until then, add a hack to close the race.
A task can hit uprobe U1, but before it calls find_uprobe() this
uprobe can be unregistered *AND* another uprobe U2 can be added to
uprobes_tree at the same inode/offset. In this case handle_swbp()
will use the not-fully-initialized U2, in particular its arch.insn
for xol.
Add the additional !UPROBE_COPY_INSN check into handle_swbp(),
if this flag is not set we simply restart as if the new uprobe was
not inserted yet. This is not very nice, we need barriers, but we
will remove this hack when we change uprobe_register().
Note: with or without this patch install_breakpoint() can race with
itself, yet another reson to kill UPROBE_COPY_INSN altogether. And
even the usage of uprobe->flags is not safe. See the next patches.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
delete_uprobe() must not be called if register_for_each_vma(false)
fails to remove all breakpoints, __uprobe_unregister() is correct.
The problem is that register_for_each_vma(false) always returns 0
and thus this logic does not work.
1. Change verify_opcode() to return 0 rather than -EINVAL when
unregister detects the !is_swbp insn, we can treat this case
as success and currently unregister paths ignore the error
code anyway.
2. Change remove_breakpoint() to propagate the error code from
write_opcode().
3. Change register_for_each_vma(is_register => false) to remove
as much breakpoints as possible but return non-zero if
remove_breakpoint() fails at least once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Jiri reported that he could trigger the WARN_ON_ONCE() in
perf_cgroup_switch() using sw-events. This is because sw-events share
a cpuctx with multiple PMUs.
Use the ->unique_pmu pointer to limit the pmu iteration to unique
cpuctx instances.
Reported-and-Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-so7wi2zf3jjzrwcutm2mkz0j@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa