Commit Graph

92 Commits

Author SHA1 Message Date
Paul E. McKenney 40393f525f Merge branches 'doctorture.2013.01.29a', 'fixes.2013.01.26a', 'tagcb.2013.01.24a' and 'tiny.2013.01.29b' into HEAD
doctorture.2013.01.11a: Changes to rcutorture and to RCU documentation.

fixes.2013.01.26a: Miscellaneous fixes.

tagcb.2013.01.24a: Tag RCU callbacks with grace-period number to
	simplify callback advancement.

tiny.2013.01.29b: Enhancements to uniprocessor handling in tiny RCU.
2013-01-28 22:25:21 -08:00
Paul E. McKenney 6bfc09e232 rcu: Provide RCU CPU stall warnings for tiny RCU
Tiny RCU has historically omitted RCU CPU stall warnings in order to
reduce memory requirements, however, lack of these warnings caused
Thomas Gleixner some debugging pain recently.  Therefore, this commit
adds RCU CPU stall warnings to tiny RCU if RCU_TRACE=y.  This keeps
the memory footprint small, while still enabling CPU stall warnings
in kernels built to enable them.

Updated to include Josh Triplett's suggested use of RCU_STALL_COMMON
config variable to simplify #if expressions.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-01-28 22:06:21 -08:00
Paul E. McKenney 5249453510 rcu: Reduce rcutorture tracing
Currently, rcutorture traces every read-side access.  This can be
problematic because even a two-minute rcutorture run on a two-CPU system
can generate 28,853,363 reads.  Normally, only a failing read is of
interest, so this commit traces adjusts rcutorture's tracing to only
trace failing reads.  The resulting event tracing records the time
and the ->completed value captured at the beginning of the RCU read-side
critical section, allowing correlation with other event-tracing messages.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
[ paulmck: Add fix to build problem located by Randy Dunlap based on
  diagnosis by Steven Rostedt. ]
2013-01-08 14:14:55 -08:00
Antti P Miettinen 3705b88db0 rcu: Add a module parameter to force use of expedited RCU primitives
There have been some embedded applications that would benefit from
use of expedited grace-period primitives.  In some ways, this is
similar to synchronize_net() doing either a normal or an expedited
grace period depending on lock state, but with control outside of
the kernel.

This commit therefore adds rcu_expedited boot and sysfs parameters
that cause the kernel to substitute expedited primitives for the
normal grace-period primitives.

[ paulmck: Add trace/event/rcu.h to kernel/srcu.c to avoid build error.
	   Get rid of infinite loop through contention path.]

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-10-23 14:54:08 -07:00
Paul E. McKenney e3ebfb96f3 rcu: Add PROVE_RCU_DELAY to provoke difficult races
There have been some recent bugs that were triggered only when
preemptible RCU's __rcu_read_unlock() was preempted just after setting
->rcu_read_lock_nesting to INT_MIN, which is a low-probability event.
Therefore, reproducing those bugs (to say nothing of gaining confidence
in alleged fixes) was quite difficult.  This commit therefore creates
a new debug-only RCU kernel config option that forces a short delay
in __rcu_read_unlock() to increase the probability of those sorts of
bugs occurring.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:42:49 -07:00
Paul E. McKenney 2a3fa843b5 rcu: Consolidate tree/tiny __rcu_read_{,un}lock() implementations
The CONFIG_TREE_PREEMPT_RCU and CONFIG_TINY_PREEMPT_RCU versions of
__rcu_read_lock() and __rcu_read_unlock() are identical, so this commit
consolidates them into kernel/rcupdate.h.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-07-02 12:34:23 -07:00
Paul E. McKenney 9dd8fb16c3 rcu: Make exit_rcu() more precise and consolidate
When running preemptible RCU, if a task exits in an RCU read-side
critical section having blocked within that same RCU read-side critical
section, the task must be removed from the list of tasks blocking a
grace period (perhaps the current grace period, perhaps the next grace
period, depending on timing).  The exit() path invokes exit_rcu() to
do this cleanup.

However, the current implementation of exit_rcu() needlessly does the
cleanup even if the task did not block within the current RCU read-side
critical section, which wastes time and needlessly increases the size
of the state space.  Fix this by only doing the cleanup if the current
task is actually on the list of tasks blocking some grace period.

While we are at it, consolidate the two identical exit_rcu() functions
into a single function.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>

Conflicts:

	kernel/rcupdate.c
2012-05-02 14:48:27 -07:00
Paul E. McKenney c0d6d01bff rcu: Check for illegal use of RCU from offlined CPUs
Although it is legal to use RCU during early boot, it is anything
but legal to use RCU at runtime from an offlined CPU.  After all, RCU
explicitly ignores offlined CPUs.  This commit therefore adds checks
for runtime use of RCU from offlined CPUs.

These checks are not perfect, in particular, they can be subverted
through use of things like rcu_dereference_raw().  Note that it is not
possible to put checks in rcu_read_lock() and friends due to the fact
that these primitives are used in code that might be used under either
RCU or lock-based protection, which means that checking rcu_read_lock()
gets you fat piles of false positives.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-02-21 09:06:03 -08:00
Frederic Weisbecker e6b80a3b09 rcu: Detect illegal rcu dereference in extended quiescent state
Report that none of the rcu read lock maps are held while in an RCU
extended quiescent state (the section between rcu_idle_enter()
and rcu_idle_exit()). This helps detect any use of rcu_dereference()
and friends from within the section in idle where RCU is not allowed.

This way we can guarantee an extended quiescent window where the CPU
can be put in dyntick idle mode or can simply aoid to be part of any
global grace period completion while in the idle loop.

Uses of RCU from such mode are totally ignored by RCU, hence the
importance of these checks.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:30 -08:00
Paul E. McKenney 91afaf3002 rcu: Add failure tracing to rcutorture
Trace the rcutorture RCU accesses and dump the trace buffer when the
first failure is detected.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:26 -08:00
Paul Gortmaker 9984de1a5a kernel: Map most files to use export.h instead of module.h
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else.  Revector them
onto the isolated export header for faster compile times.

Nothing to see here but a whole lot of instances of:

  -#include <linux/module.h>
  +#include <linux/export.h>

This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Paul E. McKenney 29c00b4a1d rcu: Add event-tracing for RCU callback invocation
There was recently some controversy about the overhead of invoking RCU
callbacks.  Add TRACE_EVENT()s to obtain fine-grained timings for the
start and stop of a batch of callbacks and also for each callback invoked.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:38:12 -07:00
Paul E. McKenney 2c42818e96 rcu: Abstract common code for RCU grace-period-wait primitives
Pull the code that waits for an RCU grace period into a single function,
which is then called by synchronize_rcu() and friends in the case of
TREE_RCU and TREE_PREEMPT_RCU, and from rcu_barrier() and friends in
the case of TINY_RCU and TINY_PREEMPT_RCU.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28 21:36:42 -07:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Paul E. McKenney 108aae2233 rcu: Use WARN_ON_ONCE for DEBUG_OBJECTS_RCU_HEAD warnings
Avoid additional multiple-warning confusion in memory-corruption scenarios.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:57 -07:00
Mathieu Desnoyers fc2ecf7ec7 rcu: Enable DEBUG_OBJECTS_RCU_HEAD from !PREEMPT
The prohibition of DEBUG_OBJECTS_RCU_HEAD from !PREEMPT was due to the
fixup actions.  So just produce a warning from !PREEMPT.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:57 -07:00
Paul E. McKenney e611eecd6f rcu: add comment saying why DEBUG_OBJECTS_RCU_HEAD depends on PREEMPT.
The build will break if you change the Kconfig to allow
DEBUG_OBJECTS_RCU_HEAD and !PREEMPT, so document the reasoning
near where the breakage would occur.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-03-04 08:05:41 -08:00
Amerigo Wang fe8e64071a rcupdate: remove dead code
DEBUG_OBJECTS_RCU_HEAD depends on PREEMPT, so #ifndef CONFIG_PREEMPT
is totally useless in kernel/rcupdate.c.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-03-04 08:05:33 -08:00
Ingo Molnar d4f8f217b8 Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/rcu 2010-10-07 09:43:11 +02:00
Paul E. McKenney 773e3f9357 rcu: move check from rcu_dereference_bh to rcu_read_lock_bh_held
As suggested by Linus, push the irqs_disabled() down to the
rcu_read_lock_bh_held() level so that all callers get the benefit
of the correct check.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-10-05 14:03:02 -07:00
Paul E. McKenney ca5ecddfa8 rcu: define __rcu address space modifier for sparse
This commit provides definitions for the __rcu annotation defined earlier.
This annotation permits sparse to check for correct use of RCU-protected
pointers.  If a pointer that is annotated with __rcu is accessed
directly (as opposed to via rcu_dereference(), rcu_assign_pointer(),
or one of their variants), sparse can be made to complain.  To enable
such complaints, use the new default-disabled CONFIG_SPARSE_RCU_POINTER
kernel configuration option.  Please note that these sparse complaints are
intended to be a debugging aid, -not- a code-style-enforcement mechanism.

There are special rcu_dereference_protected() and rcu_access_pointer()
accessors for use when RCU read-side protection is not required, for
example, when no other CPU has access to the data structure in question
or while the current CPU hold the update-side lock.

This patch also updates a number of docbook comments that were showing
their age.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christopher Li <sparse@chrisli.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:17:59 -07:00
Mathieu Desnoyers 551d55a944 tree/tiny rcu: Add debug RCU head objects
Helps finding racy users of call_rcu(), which results in hangs because list
entries are overwritten and/or skipped.

Changelog since v4:
- Bissectability is now OK
- Now generate a WARN_ON_ONCE() for non-initialized rcu_head passed to
  call_rcu(). Statically initialized objects are detected with
  object_is_static().
- Rename rcu_head_init_on_stack to init_rcu_head_on_stack.
- Remove init_rcu_head() completely.

Changelog since v3:
- Include comments from Lai Jiangshan

This new patch version is based on the debugobjects with the newly introduced
"active state" tracker.

Non-initialized entries are all considered as "statically initialized". An
activation fixup (triggered by call_rcu()) takes care of performing the debug
object initialization without issuing any warning. Since we cannot increase the
size of struct rcu_head, I don't see much room to put an identifier for
statically initialized rcu_head structures. So for now, we have to live without
"activation without explicit init" detection. But the main purpose of this debug
option is to detect double-activations (double call_rcu() use of a rcu_head
before the callback is executed), which is correctly addressed here.

This also detects potential internal RCU callback corruption, which would cause
the callbacks to be executed twice.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: David S. Miller <davem@davemloft.net>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: tglx@linutronix.de
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2010-06-14 16:37:26 -07:00
Paul E. McKenney bbad937983 rcu: slim down rcutiny by removing rcu_scheduler_active and friends
TINY_RCU does not need rcu_scheduler_active unless CONFIG_DEBUG_LOCK_ALLOC.
So conditionally compile rcu_scheduler_active in order to slim down
rcutiny a bit more.  Also gets rid of an EXPORT_SYMBOL_GPL, which is
responsible for most of the slimming.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:34 -07:00
Paul E. McKenney ee84b8243b rcu: create rcu_my_thread_group_empty() wrapper
Some RCU-lockdep splat repairs need to know whether they are running
in a single-threaded process.  Unfortunately, the thread_group_empty()
primitive is defined in sched.h, and can induce #include hell.  This
commit therefore introduces a rcu_my_thread_group_empty() wrapper that
is defined in rcupdate.c, thus avoiding the need to include sched.h
everywhere.

Signed-off-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
2010-05-06 09:28:41 -07:00
Paul E. McKenney bc293d62b2 rcu: Make RCU lockdep check the lockdep_recursion variable
The lockdep facility temporarily disables lockdep checking by
incrementing the current->lockdep_recursion variable.  Such
disabling happens in NMIs and in other situations where lockdep
might expect to recurse on itself.

This patch therefore checks current->lockdep_recursion, disabling RCU
lockdep splats when this variable is non-zero.  In addition, this patch
removes the "likely()", as suggested by Lai Jiangshan.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: David Miller <davem@davemloft.net>
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: eric.dumazet@gmail.com
LKML-Reference: <20100415195039.GA22623@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-19 08:37:19 +02:00
Paul E. McKenney e3818b8dce rcu: Make rcu_read_lock_bh_held() allow for disabled BH
Disabling BH can stand in for rcu_read_lock_bh(), and this patch
updates rcu_read_lock_bh_held() to allow for this.  In order to
avoid include-file hell, this function is moved out of line to
kernel/rcupdate.c.

This fixes a false positive RCU warning.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <20100316000343.GA25857@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16 09:57:49 +01:00
Paul E. McKenney f5f6540964 rcu: Export rcu_scheduler_active
Kernel modules using rcu_read_lock_sched_held() must now have
access to rcu_scheduler_active, so it must be exported.

This should fix the fix for the boot-time RCU-lockdep splat.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <20100226030230.GA7743@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 08:20:46 +01:00
Paul E. McKenney d9f1bb6ad7 rcu: Make rcu_read_lock_sched_held() take boot time into account
Before the scheduler starts, all tasks are non-preemptible by
definition. So, during that time, rcu_read_lock_sched_held()
needs to always return "true".  This patch makes that be so.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267135607-7056-2-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 08:20:46 +01:00
Paul E. McKenney 632ee20013 rcu: Introduce lockdep-based checking to RCU read-side primitives
Inspection is proving insufficient to catch all RCU misuses,
which is understandable given that rcu_dereference() might be
protected by any of four different flavors of RCU (RCU, RCU-bh,
RCU-sched, and SRCU), and might also/instead be protected by any
of a number of locking primitives. It is therefore time to
enlist the aid of lockdep.

This set of patches is inspired by earlier work by Peter
Zijlstra and Thomas Gleixner, and takes the following approach:

o	Set up separate lockdep classes for RCU, RCU-bh, and RCU-sched.

o	Set up separate lockdep classes for each instance of SRCU.

o	Create primitives that check for being in an RCU read-side
	critical section.  These return exact answers if lockdep is
	fully enabled, but if unsure, report being in an RCU read-side
	critical section.  (We want to avoid false positives!)
	The primitives are:

	For RCU: rcu_read_lock_held(void)

	For RCU-bh: rcu_read_lock_bh_held(void)

	For RCU-sched: rcu_read_lock_sched_held(void)

	For SRCU: srcu_read_lock_held(struct srcu_struct *sp)

o	Add rcu_dereference_check(), which takes a second argument
	in which one places a boolean expression based on the above
	primitives and/or lockdep_is_held().

o	A new kernel configuration parameter, CONFIG_PROVE_RCU, enables
	rcu_dereference_check().  This depends on CONFIG_PROVE_LOCKING,
	and should be quite helpful during the transition period while
	CONFIG_PROVE_RCU-unaware patches are in flight.

The existing rcu_dereference() primitive does no checking, but
upcoming patches will change that.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 09:40:59 +01:00
Paul E. McKenney 6ebb237bec rcu: Re-arrange code to reduce #ifdef pain
Remove #ifdefs from kernel/rcupdate.c and
include/linux/rcupdate.h by moving code to
include/linux/rcutiny.h, include/linux/rcutree.h, and
kernel/rcutree.c.

Also remove some definitions that are no longer used.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1258908830885-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22 18:58:16 +01:00
Paul E. McKenney 9f680ab414 rcu: Eliminate unneeded function wrapping
The functions rcu_init() is a wrapper for __rcu_init(), and also
sets up the CPU-hotplug notifier for rcu_barrier_cpu_hotplug().
But TINY_RCU doesn't need CPU-hotplug notification, and the
rcu_barrier_cpu_hotplug() is a simple wrapper for
rcu_cpu_notify().

So push rcu_init() out to kernel/rcutree.c and kernel/rcutiny.c
and get rid of the wrapper function rcu_barrier_cpu_hotplug().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12589088302320-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22 18:58:16 +01:00
Paul E. McKenney 9b1d82fa16 rcu: "Tiny RCU", The Bloatwatch Edition
This patch is a version of RCU designed for !SMP provided for a
small-footprint RCU implementation.  In particular, the
implementation of synchronize_rcu() is extremely lightweight and
high performance. It passes rcutorture testing in each of the
four relevant configurations (combinations of NO_HZ and PREEMPT)
on x86.  This saves about 1K bytes compared to old Classic RCU
(which is no longer in mainline), and more than three kilobytes
compared to Hierarchical RCU (updated to 2.6.30):

	CONFIG_TREE_RCU:

	   text	   data	    bss	    dec	    filename
	    183       4       0     187     kernel/rcupdate.o
	   2783     520      36    3339     kernel/rcutree.o
				   3526 Total (vs 4565 for v7)

	CONFIG_TREE_PREEMPT_RCU:

	   text	   data	    bss	    dec	    filename
	    263       4       0     267     kernel/rcupdate.o
	   4594     776      52    5422     kernel/rcutree.o
	   			   5689 Total (6155 for v7)

	CONFIG_TINY_RCU:

	   text	   data	    bss	    dec	    filename
	     96       4       0     100     kernel/rcupdate.o
	    734      24       0     758     kernel/rcutiny.o
	    			    858 Total (vs 848 for v7)

The above is for x86.  Your mileage may vary on other platforms.
Further compression is possible, but is being procrastinated.

Changes from v7 (http://lkml.org/lkml/2009/10/9/388)

o	Apply Lai Jiangshan's review comments (aside from
might_sleep() 	in synchronize_sched(), which is covered by SMP builds).

o	Fix up expedited primitives.

Changes from v6 (http://lkml.org/lkml/2009/9/23/293).

o	Forward ported to put it into the 2.6.33 stream.

o	Added lockdep support.

o	Make lightweight rcu_barrier.

Changes from v5 (http://lkml.org/lkml/2009/6/23/12).

o	Ported to latest pre-2.6.32 merge window kernel.

	- Renamed rcu_qsctr_inc() to rcu_sched_qs().
	- Renamed rcu_bh_qsctr_inc() to rcu_bh_qs().
	- Provided trivial rcu_cpu_notify().
	- Provided trivial exit_rcu().
	- Provided trivial rcu_needs_cpu().
	- Fixed up the rcu_*_enter/exit() functions in linux/hardirq.h.

o	Removed the dependence on EMBEDDED, with a view to making
	TINY_RCU default for !SMP at some time in the future.

o	Added (trivial) support for expedited grace periods.

Changes from v4 (http://lkml.org/lkml/2009/5/2/91) include:

o	Squeeze the size down a bit further by removing the
	->completed field from struct rcu_ctrlblk.

o	This permits synchronize_rcu() to become the empty function.
	Previous concerns about rcutorture were unfounded, as
	rcutorture correctly handles a constant value from
	rcu_batches_completed() and rcu_batches_completed_bh().

Changes from v3 (http://lkml.org/lkml/2009/3/29/221) include:

o	Changed rcu_batches_completed(), rcu_batches_completed_bh()
	rcu_enter_nohz(), rcu_exit_nohz(), rcu_nmi_enter(), and
	rcu_nmi_exit(), to be static inlines, as suggested by David
	Howells.  Doing this saves about 100 bytes from rcutiny.o.
	(The numbers between v3 and this v4 of the patch are not directly
	comparable, since they are against different versions of Linux.)

Changes from v2 (http://lkml.org/lkml/2009/2/3/333) include:

o	Fix whitespace issues.

o	Change short-circuit "||" operator to instead be "+" in order
to 	fix performance bug noted by "kraai" on LWN.

		(http://lwn.net/Articles/324348/)

Changes from v1 (http://lkml.org/lkml/2009/1/13/440) include:

o	This version depends on EMBEDDED as well as !SMP, as suggested
	by Ingo.

o	Updated rcu_needs_cpu() to unconditionally return zero,
	permitting the CPU to enter dynticks-idle mode at any time.
	This works because callbacks can be invoked upon entry to
	dynticks-idle mode.

o	Paul is now OK with this being included, based on a poll at
the 	Kernel Miniconf at linux.conf.au, where about ten people said
	that they cared about saving 900 bytes on single-CPU systems.

o	Applies to both mainline and tip/core/rcu.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: avi@redhat.com
Cc: mtosatti@redhat.com
LKML-Reference: <12565226351355-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 09:40:29 +01:00
Paul E. McKenney d0ec774cb2 rcu: Move rcu_barrier() to rcutree
Move the existing rcu_barrier() implementation to rcutree.c,
consistent with the fact that the rcu_barrier() implementation is
tied quite tightly to the RCU implementation.

This opens the way to simplify and fix rcutree.c's rcu_barrier()
implementation in a later patch.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12548908982563-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 08:11:20 +02:00
Paul E. McKenney 135c8aea55 rcu: Replace the rcu_barrier enum with pointer to call_rcu*() function
The rcu_barrier enum causes several problems:

  (1) you have to define the enum somewhere, and there is no
      convenient place,

  (2) the difference between TREE_RCU and TREE_PREEMPT_RCU causes
      problems when you need to map from rcu_barrier enum to struct
      rcu_state,

  (3) the switch statement are large, and

  (4) TINY_RCU really needs a different rcu_barrier() than do the
      treercu implementations.

So replace it with a functionally equivalent but cleaner function
pointer abstraction.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12541998232366-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05 21:02:05 +02:00
Paul E. McKenney 162cc2794d rcu: Fix rcu_lock_map build failure on CONFIG_PROVE_LOCKING=y
Move the rcu_lock_map definition from rcutree.c to rcupdate.c so that
TINY_RCU can use lockdep.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05 21:01:28 +02:00
Paul E. McKenney 9b2619aff0 rcu: Clean up code to address Ingo's checkpatch feedback
Move declarations and update storage classes to make checkpatch happy.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12537246441701-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-23 19:46:30 +02:00
Paul E. McKenney a71fca58b7 rcu: Fix whitespace inconsistencies
Fix a number of whitespace ^Ierrors in the include/linux/rcu*
and the kernel/rcu* files.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
LKML-Reference: <20090918172819.GA24405@linux.vnet.ibm.com>
[ did more checkpatch fixlets ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 08:53:22 +02:00
Paul E. McKenney 16e3081191 rcu: Fix synchronize_rcu() for TREE_PREEMPT_RCU
The redirection of synchronize_sched() to synchronize_rcu() was
appropriate for TREE_RCU, but not for TREE_PREEMPT_RCU.

Fix this by creating an underlying synchronize_sched().  TREE_RCU
then redirects synchronize_rcu() to synchronize_sched(), while
TREE_PREEMPT_RCU has its own version of synchronize_rcu().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
LKML-Reference: <12528585111916-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 00:06:53 +02:00
Paul E. McKenney 1423cc033d rcu: Delay rcu_barrier() wait until beginning of next CPU-hotunplug operation.
Ingo Molnar reported this lockup:

 [  200.380003] Hangcheck: hangcheck value past margin!
 [  248.192003] INFO: task S99local:2974 blocked for more than 120 seconds.
 [  248.194532] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 [  248.202330] S99local      D 0000000c  6256  2974   2687 0x00000000
 [  248.208929]  9c7ebe90 00000086 6b67ef8b 0000000c 9f25a610 81a69869 00000001 820b6990
 [  248.216123]  820b6990 820b6990 9c6e4c20 9c6e4eb4 82c78990 00000000 6b993559 0000000c
 [  248.220616]  9c7ebe90 8105f22a 9c6e4eb4 9c6e4c20 00000001 9c7ebe98 9c7ebeb4 81a65cb3
 [  248.229990] Call Trace:
 [  248.234049]  [<81a69869>] ? _spin_unlock_irqrestore+0x22/0x37
 [  248.239769]  [<8105f22a>] ? prepare_to_wait+0x48/0x4e
 [  248.244796]  [<81a65cb3>] rcu_barrier_cpu_hotplug+0xaa/0xc9
 [  248.250343]  [<8105f029>] ? autoremove_wake_function+0x0/0x38
 [  248.256063]  [<81062cf2>] notifier_call_chain+0x49/0x71
 [  248.261263]  [<81062da0>] raw_notifier_call_chain+0x11/0x13
 [  248.266809]  [<81a0b475>] _cpu_down+0x272/0x288
 [  248.271316]  [<81a0b4d5>] cpu_down+0x4a/0xa2
 [  248.275563]  [<81a0c48a>] store_online+0x2a/0x5e
 [  248.280156]  [<81a0c460>] ? store_online+0x0/0x5e
 [  248.284836]  [<814ddc35>] sysdev_store+0x20/0x28
 [  248.289429]  [<8112e403>] sysfs_write_file+0xb8/0xe3
 [  248.294369]  [<8112e34b>] ? sysfs_write_file+0x0/0xe3
 [  248.299396]  [<810e4c8f>] vfs_write+0x91/0x120
 [  248.303817]  [<810e4dc1>] sys_write+0x40/0x65
 [  248.308150]  [<81002d73>] sysenter_do_call+0x12/0x28

This change moves an RCU grace period delay off of the
critical path for CPU-hotunplug operations.

Since RCU callback migration is only performed on
CPU-hotunplug operations, and since the rcu_barrier() race is
provoked only by consecutive CPU-hotunplug operations, it is
not necessary to delay the end of a given CPU-hotunplug
operation.

We can instead choose to delay the beginning of the next
CPU-hotunplug operation.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josht@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: hugh.dickins@tiscali.co.uk
Cc: benh@kernel.crashing.org
LKML-Reference: <20090819060614.GA14383@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-19 13:58:54 +02:00
Paul E. McKenney 2e59755808 rcu: Simplify RCU CPU-hotplug notification
Use the new cpu_notifier() API to simplify RCU's CPU-hotplug
notifiers, collapsing down to a single such notifier.

This makes it trivial to provide the notifier-ordering
guarantee that rcu_barrier() depends on.

Also remove redundant open_softirq() calls from Hierarchical
RCU notifier.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: josht@linux.vnet.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: hugh.dickins@tiscali.co.uk
Cc: benh@kernel.crashing.org
LKML-Reference: <12503552312510-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 19:02:08 +02:00
Paul E. McKenney 03b042bf1d rcu: Add synchronize_sched_expedited() primitive
This adds the synchronize_sched_expedited() primitive that
implements the "big hammer" expedited RCU grace periods.

This primitive is placed in kernel/sched.c rather than
kernel/rcupdate.c due to its need to interact closely with the
migration_thread() kthread.

The idea is to wake up this kthread with req->task set to NULL,
in response to which the kthread reports the quiescent state
resulting from the kthread having been scheduled.

Because this patch needs to fallback to the slow versions of
the primitives in response to some races with CPU onlining and
offlining, a new synchronize_rcu_bh() primitive is added as
well.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Cc: davem@davemloft.net
Cc: dada1@cosmosbay.com
Cc: zbr@ioremap.net
Cc: jeff.chua.linux@gmail.com
Cc: paulus@samba.org
Cc: laijs@cn.fujitsu.com
Cc: jengelh@medozas.de
Cc: r000n@r000n.net
Cc: benh@kernel.crashing.org
Cc: mathieu.desnoyers@polymtl.ca
LKML-Reference: <12459460982947-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-03 10:02:28 +02:00
David Howells 5b1d07ed0e RCU: Don't try and predeclare inline funcs as it upsets some versions of gcc
Don't try and predeclare inline funcs like this:

	static inline void wait_migrated_callbacks(void)
	...
	static void _rcu_barrier(enum rcu_barrier type)
	{
		...
		wait_migrated_callbacks();
	}
	...
	static inline void wait_migrated_callbacks(void)
	{
		wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
	}

as it upsets some versions of gcc under some circumstances:

	kernel/rcupdate.c: In function `_rcu_barrier':
	kernel/rcupdate.c:125: sorry, unimplemented: inlining failed in call to 'wait_migrated_callbacks': function body not available
	kernel/rcupdate.c:152: sorry, unimplemented: called from here

This can be dealt with by simply putting the static variables (rcu_migrate_*)
at the top, and moving the implementation of the function up so that it
replaces its forward declaration.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-15 13:55:14 -07:00
Lai Jiangshan f69b17d7e7 rcu: rcu_barrier VS cpu_hotplug: Ensure callbacks in dead cpu are migrated to online cpu
cpu hotplug may happen asynchronously, some rcu callbacks are maybe
still on dead cpu, rcu_barrier() also needs to wait for these rcu
callbacks to complete, so we must ensure callbacks in dead cpu are
migrated to online cpu.

Paul E. McKenney's review:

  Good stuff, Lai!!!  Simpler than any of the approaches that I was
  considering, and, better yet, independent of the underlying RCU
  implementation!!!

  I was initially worried that wake_up() might wake only one of two
  possible wait_event()s, namely rcu_barrier() and the CPU_POST_DEAD code,
  but the fact that wait_event() clears WQ_FLAG_EXCLUSIVE avoids that issue.
  I was also worried about the fact that different RCU implementations have
  different mappings of call_rcu(), call_rcu_bh(), and call_rcu_sched(), but
  this is OK as well because we just get an extra (harmless) callback in the
  case that they map together (for example, Classic RCU has call_rcu_sched()
  mapping to call_rcu()).

  Overlap of CPU-hotplug operations is prevented by cpu_add_remove_lock,
  and any stray callbacks that arrive (for example, from irq handlers
  running on the dying CPU) either are ahead of the CPU_DYING callbacks on
  the one hand (and thus accounted for), or happened after the rcu_barrier()
  started on the other (and thus don't need to be accounted for).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <49C36476.1010400@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 00:09:37 +02:00
Paul E. McKenney a682604838 rcu: Teach RCU that idle task is not quiscent state at boot
This patch fixes a bug located by Vegard Nossum with the aid of
kmemcheck, updated based on review comments from Nick Piggin,
Ingo Molnar, and Andrew Morton.  And cleans up the variable-name
and function-name language.  ;-)

The boot CPU runs in the context of its idle thread during boot-up.
During this time, idle_cpu(0) will always return nonzero, which will
fool Classic and Hierarchical RCU into deciding that a large chunk of
the boot-up sequence is a big long quiescent state.  This in turn causes
RCU to prematurely end grace periods during this time.

This patch changes the rcutree.c and rcuclassic.c rcu_check_callbacks()
function to ignore the idle task as a quiescent state until the
system has started up the scheduler in rest_init(), introducing a
new non-API function rcu_idle_now_means_idle() to inform RCU of this
transition.  RCU maintains an internal rcu_idle_cpu_truthful variable
to track this state, which is then used by rcu_check_callback() to
determine if it should believe idle_cpu().

Because this patch has the effect of disallowing RCU grace periods
during long stretches of the boot-up sequence, this patch also introduces
Josh Triplett's UP-only optimization that makes synchronize_rcu() be a
no-op if num_online_cpus() returns 1.  This allows boot-time code that
calls synchronize_rcu() to proceed normally.  Note, however, that RCU
callbacks registered by call_rcu() will likely queue up until later in
the boot sequence.  Although rcuclassic and rcutree can also use this
same optimization after boot completes, rcupreempt must restrict its
use of this optimization to the portion of the boot sequence before the
scheduler starts up, given that an rcupreempt RCU read-side critical
section may be preeempted.

In addition, this patch takes Nick Piggin's suggestion to make the
system_state global variable be __read_mostly.

Changes since v4:

o	Changes the name of the introduced function and variable to
	be less emotional.  ;-)

Changes since v3:

o	WARN_ON(nr_context_switches() > 0) to verify that RCU
	switches out of boot-time mode before the first context
	switch, as suggested by Nick Piggin.

Changes since v2:

o	Created rcu_blocking_is_gp() internal-to-RCU API that
	determines whether a call to synchronize_rcu() is itself
	a grace period.

o	The definition of rcu_blocking_is_gp() for rcuclassic and
	rcutree checks to see if but a single CPU is online.

o	The definition of rcu_blocking_is_gp() for rcupreempt
	checks to see both if but a single CPU is online and if
	the system is still in early boot.

	This allows rcupreempt to again work correctly if running
	on a single CPU after booting is complete.

o	Added check to rcupreempt's synchronize_sched() for there
	being but one online CPU.

Tested all three variants both SMP and !SMP, booted fine, passed a short
rcutorture test on both x86 and Power.

Located-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 04:08:14 +01:00
Paul E. McKenney ea7d3fef42 rcu: eliminate synchronize_rcu_xxx macro
Impact: cleanup

Expand macro into two files.

The synchronize_rcu_xxx macro is quite ugly and it's only used by two
callers, so expand it instead.  This makes this code easier to change.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05 10:18:08 +01:00
Lai Jiangshan 5f86515158 rcupdate: fix bug of rcu_barrier*()
current rcu_barrier_bh() is like this:

void rcu_barrier_bh(void)
{
	BUG_ON(in_interrupt());
	/* Take cpucontrol mutex to protect against CPU hotplug */
	mutex_lock(&rcu_barrier_mutex);
	init_completion(&rcu_barrier_completion);
	atomic_set(&rcu_barrier_cpu_count, 0);
	/*
	 * The queueing of callbacks in all CPUs must be atomic with
	 * respect to RCU, otherwise one CPU may queue a callback,
	 * wait for a grace period, decrement barrier count and call
	 * complete(), while other CPUs have not yet queued anything.
	 * So, we need to make sure that grace periods cannot complete
	 * until all the callbacks are queued.
	 */
	rcu_read_lock();
	on_each_cpu(rcu_barrier_func, (void *)RCU_BARRIER_BH, 1);
	rcu_read_unlock();
	wait_for_completion(&rcu_barrier_completion);
	mutex_unlock(&rcu_barrier_mutex);
}

The inconsistency of the code and the comments show a bug here.
rcu_read_lock() cannot make sure that "grace periods for RCU_BH
cannot complete until all the callbacks are queued".
it only make sure that race periods for RCU cannot complete
until all the callbacks are queued.

so we must use rcu_read_lock_bh() for rcu_barrier_bh().
like this:

void rcu_barrier_bh(void)
{
	......
	rcu_read_lock_bh();
	on_each_cpu(rcu_barrier_func, (void *)RCU_BARRIER_BH, 1);
	rcu_read_unlock_bh();
	......
}

and also rcu_barrier() rcu_barrier_sched() are implemented like this.
it will bring a lot of duplicate code. My patch uses another way to
fix this bug, please see the comment of my patch.
Thank Paul E. McKenney for he rewrote the comment.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-21 15:59:53 +02:00
Randy Dunlap 01dcb0443e rcu: fix synchronize_rcu() so that kernel-doc works
Fix RCU's synchronize_rcu() so that it looks like a C function, enabling
it to be recognized as a function with kernel-doc annotation.

Warning(linux-2.6.26-git11//kernel/rcupdate.c:81): No description found for parameter 'synchronize_rcu'
Warning(linux-2.6.26-git11//kernel/rcupdate.c:81): No description found for parameter 'call_rcu'

[akpm@linux-foundation.org: fix comment]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21 09:31:44 +02:00
Linus Torvalds 59190f4213 Merge branch 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
  generic-ipi: more merge fallout
  generic-ipi: merge fix
  x86, visws: use mach-default/entry_arch.h
  x86, visws: fix generic-ipi build
  generic-ipi: fixlet
  generic-ipi: fix s390 build bug
  generic-ipi: fix linux-next tree build failure
  fix: "smp_call_function: get rid of the unused nonatomic/retry argument"
  fix: "smp_call_function: get rid of the unused nonatomic/retry argument"
  fix "smp_call_function: get rid of the unused nonatomic/retry argument"
  on_each_cpu(): kill unused 'retry' parameter
  smp_call_function: get rid of the unused nonatomic/retry argument
  sh: convert to generic helpers for IPI function calls
  parisc: convert to generic helpers for IPI function calls
  mips: convert to generic helpers for IPI function calls
  m32r: convert to generic helpers for IPI function calls
  arm: convert to generic helpers for IPI function calls
  alpha: convert to generic helpers for IPI function calls
  ia64: convert to generic helpers for IPI function calls
  powerpc: convert to generic helpers for IPI function calls
  ...

Fix trivial conflicts due to rcu updates in kernel/rcupdate.c manually
2008-07-15 14:12:03 -07:00
Jens Axboe 15c8b6c1aa on_each_cpu(): kill unused 'retry' parameter
It's not even passed on to smp_call_function() anymore, since that
was removed. So kill it.

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26 11:24:38 +02:00
Paul E. McKenney 70f12f848d rcu: add rcu_barrier_sched() and rcu_barrier_bh()
Add rcu_barrier_sched() and rcu_barrier_bh().  With these in place,
rcutorture no longer gives the occasional oops when repeatedly starting
and stopping torturing rcu_bh.  Also adds the API needed to flush out
pre-existing call_rcu_sched() callbacks.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-19 10:01:36 +02:00