-----BEGIN PGP SIGNATURE-----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=k5mW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zhKv
-----END PGP SIGNATURE-----
Merge 3.10.105 into android-msm-bullhead-3.10-oreo-m5
Changes in 3.10.105: (315 commits)
sched/core: Fix a race between try_to_wake_up() and a woken up task
sched/core: Fix an SMP ordering race in try_to_wake_up() vs. schedule()
crypto: algif_skcipher - Require setkey before accept(2)
crypto: af_alg - Disallow bind/setkey/... after accept(2)
crypto: af_alg - Add nokey compatibility path
crypto: algif_skcipher - Add nokey compatibility path
crypto: hash - Add crypto_ahash_has_setkey
crypto: shash - Fix has_key setting
crypto: algif_hash - Require setkey before accept(2)
crypto: skcipher - Add crypto_skcipher_has_setkey
crypto: algif_skcipher - Add key check exception for cipher_null
crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path
crypto: algif_hash - Remove custom release parent function
crypto: algif_skcipher - Remove custom release parent function
crypto: af_alg - Forbid bind(2) when nokey child sockets are present
crypto: algif_hash - Fix race condition in hash_check_key
crypto: algif_skcipher - Fix race condition in skcipher_check_key
crypto: algif_skcipher - Load TX SG list after waiting
crypto: cryptd - initialize child shash_desc on import
crypto: skcipher - Fix blkcipher walk OOM crash
crypto: gcm - Fix IV buffer size in crypto_gcm_setkey
MIPS: KVM: Fix unused variable build warning
KVM: MIPS: Precalculate MMIO load resume PC
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write
KVM: MIPS: Make ERET handle ERL before EXL
KVM: x86: fix wbinvd_dirty_mask use-after-free
KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
KVM: Disable irq while unregistering user notifier
PM / devfreq: Fix incorrect type issue.
ppp: defer netns reference release for ppp channel
x86/mm/xen: Suppress hugetlbfs in PV guests
xen: Add RING_COPY_REQUEST()
xen-netback: don't use last request to determine minimum Tx credit
xen-netback: use RING_COPY_REQUEST() throughout
xen-blkback: only read request operation from shared ring once
xen/pciback: Save xen_pci_op commands before processing it
xen/pciback: Save the number of MSI-X entries to be copied later.
xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled
xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled
xen/pciback: Do not install an IRQ handler for MSI interrupts.
xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.
xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
xen-pciback: Add name prefix to global 'permissive' variable
x86/xen: fix upper bound of pmd loop in xen_cleanhighmap()
x86/traps: Ignore high word of regs->cs in early_idt_handler_common
x86/mm: Disable preemption during CR3 read+write
x86/apic: Do not init irq remapping if ioapic is disabled
x86/mm/pat, /dev/mem: Remove superfluous error message
x86/paravirt: Do not trace _paravirt_ident_*() functions
x86/build: Build compressed x86 kernels as PIE
x86/um: reuse asm-generic/barrier.h
iommu/amd: Update Alias-DTE in update_device_table()
iommu/amd: Free domain id when free a domain of struct dma_ops_domain
ARM: 8616/1: dt: Respect property size when parsing CPUs
ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
ARM: sa1100: clear reset status prior to reboot
ARM: sa1111: fix pcmcia suspend/resume
arm64: avoid returning from bad_mode
arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
arm64: spinlocks: implement smp_mb__before_spinlock() as smp_mb()
arm64: debug: avoid resetting stepping state machine when TIF_SINGLESTEP
MIPS: Malta: Fix IOCU disable switch read for MIPS64
MIPS: ptrace: Fix regs_return_value for kernel context
powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET
powerpc/vdso64: Use double word compare on pointers
powerpc/powernv: Use CPU-endian PEST in pnv_pci_dump_p7ioc_diag_data()
powerpc/64: Fix incorrect return value from __copy_tofrom_user
powerpc/nvram: Fix an incorrect partition merge
avr32: fix copy_from_user()
avr32: fix 'undefined reference to `___copy_from_user'
avr32: off by one in at32_init_pio()
s390/dasd: fix hanging device after clear subchannel
parisc: Ensure consistent state when switching to kernel stack at syscall entry
microblaze: fix __get_user()
microblaze: fix copy_from_user()
mn10300: failing __get_user() and get_user() should zero
m32r: fix __get_user()
sh64: failing __get_user() should zero
score: fix __get_user/get_user
s390: get_user() should zero on failure
ARC: uaccess: get_user to zero out dest in cause of fault
asm-generic: make get_user() clear the destination on errors
frv: fix clear_user()
cris: buggered copy_from_user/copy_to_user/clear_user
blackfin: fix copy_from_user()
score: fix copy_from_user() and friends
sh: fix copy_from_user()
hexagon: fix strncpy_from_user() error return
mips: copy_from_user() must zero the destination on access_ok() failure
asm-generic: make copy_from_user() zero the destination properly
alpha: fix copy_from_user()
metag: copy_from_user() should zero the destination on access_ok() failure
parisc: fix copy_from_user()
openrisc: fix copy_from_user()
openrisc: fix the fix of copy_from_user()
mn10300: copy_from_user() should zero on access_ok() failure...
sparc32: fix copy_from_user()
ppc32: fix copy_from_user()
ia64: copy_from_user() should zero the destination on access_ok() failure
fix fault_in_multipages_...() on architectures with no-op access_ok()
fix memory leaks in tracing_buffers_splice_read()
arc: don't leak bits of kernel stack into coredump
Fix potential infoleak in older kernels
swapfile: fix memory corruption via malformed swapfile
coredump: fix unfreezable coredumping task
usb: dwc3: gadget: increment request->actual once
USB: validate wMaxPacketValue entries in endpoint descriptors
USB: fix typo in wMaxPacketSize validation
usb: xhci: Fix panic if disconnect
USB: serial: fix memleak in driver-registration error path
USB: kobil_sct: fix non-atomic allocation in write path
USB: serial: mos7720: fix non-atomic allocation in write path
USB: serial: mos7840: fix non-atomic allocation in write path
usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition
USB: change bInterval default to 10 ms
usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()
USB: serial: cp210x: fix hardware flow-control disable
usb: misc: legousbtower: Fix NULL pointer deference
usb: gadget: function: u_ether: don't starve tx request queue
USB: serial: cp210x: fix tiocmget error handling
usb: gadget: u_ether: remove interrupt throttling
usb: chipidea: move the lock initialization to core file
Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
ALSA: rawmidi: Fix possible deadlock with virmidi registration
ALSA: timer: fix NULL pointer dereference in read()/ioctl() race
ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE
ALSA: timer: fix NULL pointer dereference on memory allocation failure
ALSA: ali5451: Fix out-of-bound position reporting
ALSA: pcm : Call kill_fasync() in stream lock
zfcp: fix fc_host port_type with NPIV
zfcp: fix ELS/GS request&response length for hardware data router
zfcp: close window with unblocked rport during rport gone
zfcp: retain trace level for SCSI and HBA FSF response records
zfcp: restore: Dont use 0 to indicate invalid LUN in rec trace
zfcp: trace on request for open and close of WKA port
zfcp: restore tracing of handle for port and LUN with HBA records
zfcp: fix D_ID field with actual value on tracing SAN responses
zfcp: fix payload trace length for SAN request&response
zfcp: trace full payload of all SAN records (req,resp,iels)
scsi: zfcp: spin_lock_irqsave() is not nestable
scsi: mpt3sas: Fix secure erase premature termination
scsi: mpt3sas: Unblock device after controller reset
scsi: mpt3sas: fix hang on ata passthrough commands
mpt2sas: Fix secure erase premature termination
scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
scsi: ibmvfc: Fix I/O hang when port is not mapped
scsi: Fix use-after-free
scsi: arcmsr: Buffer overflow in arcmsr_iop_message_xfer()
scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded
scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware
ext4: validate that metadata blocks do not overlap superblock
ext4: avoid modifying checksum fields directly during checksum verification
ext4: use __GFP_NOFAIL in ext4_free_blocks()
ext4: reinforce check of i_dtime when clearing high fields of uid and gid
ext4: allow DAX writeback for hole punch
ext4: sanity check the block and cluster size at mount time
reiserfs: fix "new_insert_key may be used uninitialized ..."
reiserfs: Unlock superblock before calling reiserfs_quota_on_mount()
xfs: fix superblock inprogress check
libxfs: clean up _calc_dquots_per_chunk
btrfs: ensure that file descriptor used with subvol ioctls is a dir
ocfs2/dlm: fix race between convert and migration
ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
ubifs: Fix assertion in layout_in_gaps()
ubifs: Fix xattr_names length in exit paths
UBIFS: Fix possible memory leak in ubifs_readdir()
ubifs: Abort readdir upon error
ubifs: Fix regression in ubifs_readdir()
UBI: fastmap: scrub PEB when bitflips are detected in a free PEB EC header
NFSv4.x: Fix a refcount leak in nfs_callback_up_net
NFSD: Using free_conn free connection
NFS: Don't drop CB requests with invalid principals
NFSv4: Open state recovery must account for file permission changes
fs/seq_file: fix out-of-bounds read
fs/super.c: fix race between freeze_super() and thaw_super()
isofs: Do not return EACCES for unknown filesystems
hostfs: Freeing an ERR_PTR in hostfs_fill_sb_common()
driver core: Delete an unnecessary check before the function call "put_device"
driver core: fix race between creating/querying glue dir and its cleanup
drm/radeon: fix radeon_move_blit on 32bit systems
drm: Reject page_flip for !DRIVER_MODESET
drm/radeon: Ensure vblank interrupt is enabled on DPMS transition to on
qxl: check for kmap failures
Input: i8042 - break load dependency between atkbd/psmouse and i8042
Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
Input: ili210x - fix permissions on "calibrate" attribute
hwrng: exynos - Disable runtime PM on probe failure
hwrng: omap - Fix assumption that runtime_get_sync will always succeed
hwrng: omap - Only fail if pm_runtime_get_sync returns < 0
i2c-eg20t: fix race between i2c init and interrupt enable
em28xx-i2c: rt_mutex_trylock() returns zero on failure
i2c: core: fix NULL pointer dereference under race condition
i2c: at91: fix write transfers by clearing pending interrupt first
iio: accel: kxsd9: Fix raw read return
iio: accel: kxsd9: Fix scaling bug
thermal: hwmon: Properly report critical temperature in sysfs
cdc-acm: fix wrong pipe type on rx interrupt xfers
timers: Use proper base migration in add_timer_on()
EDAC: Increment correct counter in edac_inc_ue_error()
IB/ipoib: Fix memory corruption in ipoib cm mode connect flow
IB/core: Fix use after free in send_leave function
IB/ipoib: Don't allow MC joins during light MC flush
IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV
IB/mlx4: Fix create CQ error flow
IB/uverbs: Fix leak of XRC target QPs
IB/cm: Mark stale CM id's whenever the mad agent was unregistered
mtd: blkdevs: fix potential deadlock + lockdep warnings
mtd: pmcmsp-flash: Allocating too much in init_msp_flash()
mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl
perf symbols: Fixup symbol sizes before picking best ones
perf: Tighten (and fix) the grouping condition
tty: Prevent ldisc drivers from re-using stale tty fields
tty: limit terminal size to 4M chars
tty: vt, fix bogus division in csi_J
vt: clear selection before resizing
drivers/vfio: Rework offsetofend()
include/stddef.h: Move offsetofend() from vfio.h to a generic kernel header
stddef.h: move offsetofend inside #ifndef/#endif guard, neaten
ipv6: don't call fib6_run_gc() until routing is ready
ipv6: split duplicate address detection and router solicitation timer
ipv6: move DAD and addrconf_verify processing to workqueue
ipv6: addrconf: fix dev refcont leak when DAD failed
ipv6: fix rtnl locking in setsockopt for anycast and multicast
ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()
ipv6: correctly add local routes when lo goes up
ipv6: dccp: fix out of bound access in dccp_v6_err()
ipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped
ip6_tunnel: Clear IP6CB in ip6tunnel_xmit()
ip6_tunnel: disable caching when the traffic class is inherited
net/irda: handle iriap_register_lsap() allocation failure
tcp: fix use after free in tcp_xmit_retransmit_queue()
tcp: properly scale window in tcp_v[46]_reqsk_send_ack()
tcp: fix overflow in __tcp_retransmit_skb()
tcp: fix wrong checksum calculation on MTU probing
tcp: take care of truncations done by sk_filter()
bonding: Fix bonding crash
net: ratelimit warnings about dst entry refcount underflow or overflow
mISDN: Support DR6 indication in mISDNipac driver
mISDN: Fixing missing validation in base_sock_bind()
net: disable fragment reassembly if high_thresh is set to zero
ipvs: count pre-established TCP states as active
iwlwifi: pcie: fix access to scratch buffer
svc: Avoid garbage replies when pc_func() returns rpc_drop_reply
brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfill
brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()
brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap()
pstore: Fix buffer overflow while write offset equal to buffer size
net/mlx4_core: Allow resetting VF admin mac to zero
firewire: net: guard against rx buffer overflows
firewire: net: fix fragmented datagram_size off-by-one
netfilter: fix namespace handling in nf_log_proc_dostring
can: bcm: fix warning in bcm_connect/proc_register
net: fix sk_mem_reclaim_partial()
net: avoid sk_forward_alloc overflows
ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route
packet: call fanout_release, while UNREGISTERING a netdev
net: sctp, forbid negative length
sctp: validate chunk len before actually using it
net: clear sk_err_soft in sk_clone_lock()
net: mangle zero checksum in skb_checksum_help()
dccp: do not send reset to already closed sockets
dccp: fix out of bound access in dccp_v4_err()
sctp: assign assoc_id earlier in __sctp_connect
neigh: check error pointer instead of NULL for ipv4_neigh_lookup()
ipv4: use new_gw for redirect neigh lookup
mac80211: fix purging multicast PS buffer queue
mac80211: discard multicast and 4-addr A-MSDUs
cfg80211: limit scan results cache size
mwifiex: printk() overflow with 32-byte SSIDs
ipv4: Set skb->protocol properly for local output
net: sky2: Fix shutdown crash
kaweth: fix firmware download
tracing: Move mutex to protect against resetting of seq data
kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd
Revert "ipc/sem.c: optimize sem_lock()"
cfq: fix starvation of asynchronous writes
drbd: Fix kernel_sendmsg() usage - potential NULL deref
lib/genalloc.c: start search from start of chunk
tools/vm/slabinfo: fix an unintentional printf
rcu: Fix soft lockup for rcu_nocb_kthread
ratelimit: fix bug in time interval by resetting right begin time
mfd: core: Fix device reference leak in mfd_clone_cell
PM / sleep: fix device reference leak in test_suspend
mmc: mxs: Initialize the spinlock prior to using it
mmc: block: don't use CMD23 with very old MMC cards
pstore/core: drop cmpxchg based updates
pstore/ram: Use memcpy_toio instead of memcpy
pstore/ram: Use memcpy_fromio() to save old buffer
mb86a20s: fix the locking logic
mb86a20s: fix demod settings
cx231xx: don't return error on success
cx231xx: fix GPIOs for Pixelview SBTVD hybrid
gpio: mpc8xxx: Correct irq handler function
uio: fix dmem_region_start computation
KEYS: Fix short sprintf buffer in /proc/keys show function
hv: do not lose pending heartbeat vmbus packets
staging: iio: ad5933: avoid uninitialized variable in error case
mei: bus: fix received data size check in NFC fixup
ACPI / APEI: Fix incorrect return value of ghes_proc()
PCI: Handle read-only BARs on AMD CS553x devices
tile: avoid using clocksource_cyc2ns with absolute cycle count
dm flakey: fix reads to be issued if drop_writes configured
mm,ksm: fix endless looping in allocating memory when ksm enable
can: dev: fix deadlock reported after bus-off
hwmon: (adt7411) set bit 3 in CFG1 register
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
mfd: 88pm80x: Double shifting bug in suspend/resume
ASoC: omap-mcpdm: Fix irq resource handling
regulator: tps65910: Work around silicon erratum SWCZ010
dm: mark request_queue dead before destroying the DM device
fbdev/efifb: Fix 16 color palette entry calculation
metag: Only define atomic_dec_if_positive conditionally
Linux 3.10.105
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Conflicts:
arch/arm/mach-sa1100/generic.c
arch/arm64/kernel/traps.c
crypto/blkcipher.c
drivers/devfreq/devfreq.c
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/u_ether.c
fs/ubifs/dir.c
include/net/if_inet6.h
lib/genalloc.c
net/ipv6/addrconf.c
net/ipv6/tcp_ipv6.c
net/wireless/scan.c
sound/core/timer.c
commit 9853a55ef1bb66d7411136046060bbfb69c714fa upstream.
It's possible to make scanning consume almost arbitrary amounts
of memory, e.g. by sending beacon frames with random BSSIDs at
high rates while somebody is scanning.
Limit the number of BSS table entries we're willing to cache to
1000, limiting maximum memory usage to maybe 4-5MB, but lower
in practice - that would be the case for having both full-sized
beacon and probe response frames for each entry; this seems not
possible in practice, so a limit of 1000 entries will likely be
closer to 0.5 MB.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This reverts commit 826d3568d5.
Key management offload (LFR3) cannot be dependent on kernel changes
that have not yet been up-streamed. Therefore, all kernel support
for key management offload needs to be reverted until the open source
version of kernel support for key management offload is available.
CRs-Fixed: 778119
Change-Id: Id5b7c93cb9a82f43f0a7195f8eba15e83a6cdcec
Signed-off-by: Chet Lanctot <clanctot@codeaurora.org>
This reverts commit c03321683c.
Key management offload (LFR3) cannot be dependent on kernel changes
that have not yet been up-streamed. Therefore, all kernel support
for key management offload needs to be reverted until the open source
version of kernel support for key management offload is available.
Conflicts:
include/net/cfg80211.h
CRs-Fixed: 778119
Change-Id: I5b3175c65d59a95e632200411b29fbd52cb87d94
Signed-off-by: Chet Lanctot <clanctot@codeaurora.org>
When the device indicates completion of key management offload to
the supplicant by signaling a key management authorization event,
it must pass the derived PTK KCK and PTK KEK. The supplicant
needs this information in case it must handle a later operation
that requires knowledge of the PTK, such as a GTK rekeying.
A new routine to signal key management offload completion is
defined, cfg80211_key_mgmt_auth. This routine takes a
parameter which is a structure containing the authorization
information. Eventually the old routine cfg80211_authorization_event
can be removed when it is no longer referenced by any device driver.
Change-Id: I2bc426178f36615e31c110cdbcd539016bc41975
CRs-Fixed: 728422
Signed-off-by: Chet Lanctot <clanctot@codeaurora.org>
Further to the change which added support for key management offload,
this change adds definition for new event used in nl80211 internal queue
and adds structure for information passed with the event. Adds definition
for the processing routine for the event. Adds case for new event defined
above.
CRs-Fixed: 701055
Change-Id: I0e2d08d84c2331af4c16c272d2ba4e0c5a9b7e9b
Signed-off-by: Ahmad Kholaif <akholaif@codeaurora.org>
Add support for vendor-specific commands to nl80211. This is
intended to be used for really vendor-specific functionality
that can't be implemented in a generic fashion for any reason.
It's *NOT* intended to be used for any normal/generic feature
or any optimisations that could be implemented across drivers.
Currently, only vendor commands (with replies) are supported,
no dump operations or vendor-specific notifications.
Also add a function wdev_to_ieee80211_vif() to mac80211 which
is needed for mac80211-based drivers wanting to implement any
vendor commands.
CRs-fixed: 576020
Change-Id: I5bdab7e0dce095f2d846687343f78cc0dd60aab1
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Git-commit: ad7e718c9b4f717823fd920a0103f7b0fb06183f
Git-repo: https://git.kernel.org/cgit/linux/kernel/git/linville/wireless-next.git
[sameert@codeaurora.org: manually merged conflicts]
Signed-off-by: Sameer Thalappil <sameert@codeaurora.org>
This reverts commit 8125696991.
The commit"cfg80211/mac80211: disconnect on suspend" forces disconnection
on wlan interfaces if wake on wireless is not enabled from the user space.
Wake on Wireless is enabled by default in wlan driver (CLD) and cfg80211
layer never aware of wake on wirless enabled status done in wlan driver.
To avoid the disconnection while going to suspend and keep wlan driver
in WOW mode by default, the commit "cfg80211/mac80211: disconnect on
suspend" should be reverted.
CRs-Fixed: 540571
Change-Id: I483fe0530f9f00c338680416449215af326e3df1
Signed-off-by: Ganesh Kondabattini <ganeshk@codeaurora.org>
Provision to distinguish the P2P scan and the normal scan
with no_cck flag and thus disable the 11b rates for
p2p scan.
Change-Id: Ia4073a5f926c6ac97dffdee99f54ba53535fea85
Signed-off-by: Sunil Dutt Undekari<duttus@codeaurora.org>
Some protocols need a more reliable connection to complete
successful in reasonable time. This patch adds a user-space
API to indicate the wireless driver that a critical protocol
is about to commence and when it is done, using nl80211 primitives
NL80211_CMD_CRIT_PROTOCOL_START and NL80211_CRIT_PROTOCOL_STOP.
There can be only on critical protocol session started per
registered cfg80211 device.
The driver can support this by implementing the cfg80211 callbacks
.crit_proto_start() and .crit_proto_stop(). Examples of protocols
that can benefit from this are DHCP, EAPOL, APIPA. Exactly how the
link can/should be made more reliable is up to the driver. Things
to consider are avoid scanning, no multi-channel operations, and
alter coexistence schemes.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a P2P device wdev is removed while it has a scan, then the
scan completion might crash later as it is already freed by
that time. To avoid the crash always check the scan completion
when the P2P device is being removed for some reason. If the
driver already canceled it, don't want and free it, otherwise
warn and leak it to avoid later crashes.
In order to do this, locking needs to be changed away from the
rdev mutex (which can't always be guaranteed). For now, use
the sched_scan_mtx instead, I'll rename it to just scan_mtx in
a later patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If possible that after suspend, cfg80211 will receive request to
disconnect what require action on interface that was removed during
suspend.
Problem can manifest itself by various warnings similar to below one:
WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x2f9/0x300 [mac80211]()
wlan0: Failed check-sdata-in-driver check, flags: 0x4
Call Trace:
[<c043e0b3>] warn_slowpath_fmt+0x33/0x40
[<f83707c9>] ieee80211_bss_info_change_notify+0x2f9/0x300 [mac80211]
[<f83a660a>] ieee80211_recalc_ps_vif+0x2a/0x30 [mac80211]
[<f83a6706>] ieee80211_set_disassoc+0xf6/0x500 [mac80211]
[<f83a9441>] ieee80211_mgd_deauth+0x1f1/0x280 [mac80211]
[<f8381b36>] ieee80211_deauth+0x16/0x20 [mac80211]
[<f8261e70>] cfg80211_mlme_down+0x70/0xc0 [cfg80211]
[<f8264de1>] __cfg80211_disconnect+0x1b1/0x1d0 [cfg80211]
To fix the problem disconnect from any associated network before
suspend. User space is responsible to establish connection again
after resume. This basically need to be done by user space anyway,
because associated stations can go away during suspend (for example
NetworkManager disconnects on suspend and connect on resume by default).
Patch also handle situation when driver refuse to suspend with wowlan
configured and try to suspend again without it.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_mlme_assoc() has grown far too many arguments,
make the caller build almost all of the driver struct
and pass that to the function instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For testing it's sometimes useful to be able to
override certain VHT capability advertisement,
add the ability to do that in cfg80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add new NL80211_CMD_RADAR_DETECT, which starts the Channel
Availability Check (CAC). This command will also notify the
usermode about events (CAC finished, CAC aborted, radar
detected, NOP finished).
Once radar detection has started it should continuously
monitor for radars as long as the channel is active.
This patch enables DFS for AP mode in nl80211/cfg80211.
Based on original patch by Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Intel Wireless devices are able to make a TCP connection
after suspending, sending some data and waking up when
the connection receives wakeup data (or breaks). Add the
WoWLAN configuration and feature advertising API for it.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, cfg80211 will copy beacon IEs from a previously
received hidden SSID beacon to a probe response entry, if
that entry is created after the beacon entry. However, if
it is the other way around, or if the beacon is updated,
such changes aren't propagated.
Fix this by tracking the relation between the probe
response and beacon BSS structs in this case.
In case drivers have private data stored in a BSS struct
and need access to such data from a beacon entry, cfg80211
now provides the hidden_beacon_bss pointer from the probe
response entry to the beacon entry.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To ease further DFS development regarding interface combinations, use
the interface combinations structure to test for radar capabilities.
Drivers can specify which channel widths they support, and in which
modes. Right now only a single AP interface is allowed, but as the
DFS code evolves other combinations can be enabled.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is pretty much useless since get_wiphy_idx()
always returns true since it's always called with
a valid wiphy pointer.
Acked-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a BSS struct is updated, the IEs are currently
overwritten or freed. This can lead to races if some
other CPU is accessing the BSS struct and using the
IEs concurrently.
Fix this by always allocating the IEs in a new struct
that holds the data and length and protecting access
to this new struct with RCU.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some of the chandef checking that we do in cfg80211
to check if a channel is supported or not is also
needed in mac80211, so rework that a bit and export
the functions that are needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change nl80211 to support specifying a VHT (or HT)
using the control channel frequency (as before) and
new attributes for the channel width and first and
second center frequency. The old channel type is of
course still supported for HT.
Also change the cfg80211 channel definition struct
to support these by adding the relevant fields to
it (and removing the _type field.)
This also adds new helper functions:
- cfg80211_chandef_create to create a channel def
struct given the control channel and channel type,
- cfg80211_chandef_identical to check if two channel
definitions are identical
- cfg80211_chandef_compatible to check if the given
channel definitions are compatible, and return the
wider of the two
This isn't entirely complete, but that doesn't matter
until we have a driver using it. In particular, it's
missing
- regulatory checks on the usable bandwidth (if that
even makes sense)
- regulatory TX power (database can't deal with it)
- a proper channel compatibility calculation for the
new channel types
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of passing a channel pointer and channel type
to all functions and driver methods, pass a new channel
definition struct. Right now, this struct contains just
the control channel and channel type, but for VHT this
will change.
Also, add a small inline cfg80211_get_chandef_type() so
that drivers don't need to use the _type field of the
new structure all the time, which will change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As mwifiex (and mac80211 in the software case) are the
only drivers actually implementing remain-on-channel
with channel type, userspace can't be relying on it.
This is the case, as it's used only for P2P operations
right now.
Rather than adding a flag to tell userspace whether or
not it can actually rely on it, simplify all the code
by removing the ability to use different channel types.
Leave only the validation of the attribute, so that if
we extend it again later (with the needed capability
flag), it can't break userspace sending invalid data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit:
commit 5e760230e4
Author: Johannes Berg <johannes.berg@intel.com>
Date: Fri Nov 4 11:18:17 2011 +0100
cfg80211: allow registering to beacons
allowed only a single process to register for beacon events
per wiphy. This breaks cases where a user may want two or
more VIFs on a wiphy and run a seperate hostapd process on
each vif.
This patch allows multiple beacon listeners, fixing the
regression.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SAE extends Authentication frames with fields that are not information
elements. NL80211_ATTR_IE is not suitable for these, so introduce a new
attribute that can be used to specify the fields needed for SAE in
station mode.
Signed-off-by: Jouni Malinen <j@w1.fi>
[change to verify that SAE is only used with authenticate command]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is a frequent mistake to confuse the netlink port identifier with a
process identifier. Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.
I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.
I have successfully built an allyesconfig kernel with this change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
libertas currently calls cfg80211_disconnected() when it is being
brought down. This causes an event to be allocated, but since the
wdev is already removed from the rdev by the time that the event
processing work executes, the event is never processed or freed.
http://article.gmane.org/gmane.linux.kernel.wireless.general/95666
Fix this leak, and other possible situations, by processing the event
queue when a device is being unregistered. Thanks to Johannes Berg for
the suggestion.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: stable@vger.kernel.org
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Revert commit b78e8ceac2
("cfg80211: track monitor channel") and remove the
set_monitor_enabled() callback.
Due to the tracking happening in NETDEV_PRE_UP, it had
introduced bugs because the monitor interface callback
would be called before the device was started. It looks
like there's no way to fix this, and using NETDEV_PRE_UP
is broken anyway (since there's no NETDEV_UP_FAIL), so
remove all that code, track interfaces in NETDEV_UP and
also stop tracking the monitor channel in cfg80211.
This mostly reverts to before the tracking, except that
we keep the interface count tracking so that setting the
monitor channel can be rejected properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To call cfg80211_get_chan_state() we need to lock
the wdev, so we need to lock the wdev_iter mutex
in cfg80211_can_use_iftype_chan(). This needs to
use nested locking for lockdep.
Also, cfg80211_get_chan_state() doesn't actually
use the rdev, so remove that completely including
the lock assertion that isn't needed.
Reported-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The management frame and remain-on-channel APIs will be
needed in the P2P device abstraction, so move them over
to the new wdev-based APIs. Userspace can still use both
the interface index and wdev identifier for them so it's
backward compatible, but for the P2P Device wdev it will
be able to use the wdev identifier only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to support a P2P device abstraction and
Bluetooth high-speed AMPs, we need to have a way
to identify virtual interfaces that don't have a
netdev associated.
Do this by adding a NL80211_ATTR_WDEV attribute
to identify a wdev which may or may not also be
a netdev.
To simplify things, use a 64-bit value with the
high 32 bits being the wiphy index for this new
wdev identifier in the nl80211 API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Michal's monitor channel tracking introduce a locking problem
as it locked the rdev lock inside the netdev notifier which
isn't allowed as we might already hold it if we get there by
removing an interface that is up.
Fix this by relying only on the RTNL to protect the interface
counters, the RTNL is always held in these code paths anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
.connect cannot be handled since the driver scans
and connects on its own. It is up to the driver
then to refuse a connection (with -EBUSY for
example).
Non-fixed channel IBSSes always take a single
channel resource. For example two non-fixed
channel IBSSes always take up 2
num_different_channels, even if they operate on
the same channel at a given point of time.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make it even more obvious we support single
monitor channel. This will allow us to remove
.get_channel.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implements .set_monitor_enabled(wiphy, enabled).
Notifies driver upon change of interface layout.
If only monitor interfaces become present it is
called with 2nd argument being true. If
non-monitor interface appears then 2nd argument
is false. Driver is notified only upon change.
This makes it more obvious about the fact that
cfg80211 supports single monitor channel. Once we
implement multi-channel we don't want to allow
setting monitor channel while other interface
types are running. Otherwise it would be ambiguous
once we start considering num_different_channels.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Helper function for finding out which channel is
used by a given interface.
An exclusive channel can be used only by a single
interface. This is mainly for non-fixed channel
IBSS handling.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This functionality will be reused when interface
is going down. Avoids code duplication. Also adds
missing wdev locking.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that we've removed all uses of the set_channel
API except for the monitor channel and in libertas,
clarify this. Split the libertas mesh use into a
new libertas_set_mesh_channel() operation, just to
keep backward compatibility, and rename the normal
set_channel() to set_monitor_channel().
Also describe the desired set_monitor_channel()
semantics more clearly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Just like the AP mode patch, instead of setting
the channel and then joining the mesh network,
provide the channel to join the network on to
the join_mesh() function.
Like in AP mode, you can also give the channel
to the join-mesh nl80211 command now.
Unlike AP mode, it picks a default channel if
none was given.
As libertas uses mesh mode interfaces but has
no join_mesh callback and we can't simply break
it, keep some compatibility code for that case
and configure the channel directly for it.
In the non-libertas case, where we store the
channel until join, allow setting it while the
interface is down.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
cfg80211_calculate_bitrate() is defined in the external
header file cfg80211.h now, so no need to keep it in
the internal one as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This is needed by mac80211 to keep a reference
to a BSS alive for the auth process. Remove the
old version of cfg80211_ref_bss() since it's
not actually used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
To track authenticated state seems to have been
a design mistake in cfg80211. It is possible to
have out of band authentication (FT), tracking
multiple authentications caused more problems
than it ever helped, and the implementation in
mac80211 is too complex.
Remove all this complexity, and let userspace
do whatever it wants to, mac80211 can deal with
that just fine. Association is still tracked of
course, but authentication no longer is. Local
auth state changes are thus no longer of value,
so ignore them completely.
This will also help implement SAE -- asking the
driver to do an authentication is now almost
equivalent to sending an authentication frame,
with the exception of shared key authentication
which is still handled completely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
It is quite possible to run into a race in bss timeout where
the drivers see the bss entry just before notifying cfg80211
of a roaming event but it got timed out by the time rdev->event_work
got scehduled from cfg80211_wq. This would result in the following
WARN-ON() along with the failure to notify the user space of
the roaming. The other situation which is happening with ath6kl
that runs into issue is when the driver reports roam to same AP
event where the AP bss entry already got expired. To fix this,
move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed().
[158645.538384] WARNING: at net/wireless/sme.c:586
__cfg80211_roamed+0xc2/0x1b1()
[158645.538810] Call Trace:
[158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a
[158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1
[158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13
[158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1
[158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc
[158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36
[158645.539195] [<c10482ae>] process_one_work+0x219/0x38b
[158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419
[158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf
[158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5
[158645.539407] [<c104b3e2>] kthread+0x62/0x67
[158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42
[158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This allows users to disable features such as HT, HT40,
and to modify the MCS, AMPDU, and AMSDU settings for
drivers that support it.
The MCS, AMPDU, and AMSDU features that may be disabled are
are reported in the phy-info netlink message as a mask.
Attemping to disable features that are not supported will
take no affect, but will not return errors. This is to aid
backwards compatibility in user-space apps that may not be
clever enough to deal with parsing the the capabilities mask.
This patch only enables the infrastructure. An additional
patch will enable the feature in mac80211.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
For probe responses it can be useful to not wait for ACK to
avoid retransmissions if the station that sent the probe is
already on the next channel, so allow userspace to request
not caring about the ACK with a new nl80211 flag.
Since mac80211 needs to be updated for the new function
prototype anyway implement it right away -- it's just a
few lines of code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Add the ability to register to received beacon frames
to allow implementing OLBC logic in userspace. The
registration is per wiphy since there's no point in
receiving the same frame multiple times.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>